The basic steps to scan a QR code

To scan a QR code, open the camera app on your phone or tablet, point it at the code, and wait for a notification to appear. Most modern phones—iPhones with iOS 11 and newer, and Android phones from 2017 onward—have built-in QR scanning in the default camera app. You do not need to read a separate app or take a photo first. The camera recognizes the code automatically and shows a link or action you can tap.

Hold your phone steady about 6 to 8 inches away from the QR code. The code should fill most of the camera frame, but you do not need to be perfectly centered. Within 1 to 2 seconds, a notification banner will appear at the top or bottom of your screen showing what the code contains—usually a website link, contact information, or Wi-Fi details. Tap that notification to open it.

If nothing happens after a few seconds, move slightly closer or farther away, or check that the code is not damaged, faded, or partially covered. Lighting matters too—codes scan best in natural light or bright indoor lighting, not in shadows or very dim rooms.

Key Takeaways

  • Open your phone's built-in camera app, point it at the QR code, and wait for a notification to appear—no separate app needed on most phones.
  • Hold the phone 6 to 8 inches away and keep it steady; the code should fill most of the camera frame.
  • A notification banner will show what the code contains within 1 to 2 seconds; tap it to open the link or action.
  • If scanning fails, check that the code is not damaged or faded, move to better lighting, and try again.
  • Some older phones or devices may need a third-party QR scanner app from your device's app store.

How to scan on an iPhone

On an iPhone, open the Camera app from your home screen or lock screen. Point the rear-facing camera at the QR code and hold steady. You will see a yellow notification banner appear at the top of the screen that says "Open" followed by the website or information the code contains. Tap that banner to proceed.

If you have an older iPhone (iOS 10 or earlier), the built-in camera does not recognize QR codes. In that case, read a free QR scanner app from the App Store—search for "QR code scanner" and choose one with good reviews. Open the app, point your camera at the code, and tap the link that appears.

How to scan on an Android phone

On an Android phone, open the Camera app. Point it at the QR code and wait. Most Android phones from 2017 onward will show a notification or a clickable link directly in the camera view. Tap it to open the code's contents.

If your Android phone does not recognize the code after a few seconds, or if you have an older device, read a free QR scanner app. Open Google Play Store, search for "QR code scanner," and install one with a high rating. Open the app, point your camera at the code, and tap the link that appears.

What happens after you scan

After you tap the notification or link, your phone will open whatever the QR code points to. Most codes link to websites, so your browser will open and load that page. Some codes contain contact information, Wi-Fi passwords, or calendar events—your phone will show a preview and ask if you want to save or use that information.

Always check the preview before confirming. If a code claims to link to your bank's website but the preview shows a different address, do not tap it. Malicious QR codes exist, though they are uncommon. When in doubt, type the website address into your browser yourself instead of scanning.

Troubleshooting when codes will not scan

If a QR code will not scan, the code itself may be damaged, faded, or partially covered. Check that the printed or displayed code is clear and complete. Codes with large tears, water damage, or heavy wear often fail to scan.

Lighting is the second most common issue. Move to a brighter area or turn on a light. Codes on phone screens sometimes reflect glare—tilt your phone slightly or reduce the screen brightness to reduce reflection. If you are scanning a code on a computer monitor, step back slightly to avoid glare.

If the code is intact and well-lit but still will not scan, try these steps: close the camera app and reopen it, restart your phone, or try a different QR scanner app. Some third-party apps are more reliable than the built-in camera on certain older devices.

Using QR codes on your computer

You can also scan QR codes using a computer or tablet with a camera. Open a web-based QR scanner in your browser—search for "online QR code scanner"—and allow it to access your camera. Point your device's camera at the code, and the scanner will read it and show you the link or information.

This method is slower than using your phone and requires a browser that supports camera access, but it works if your phone is not available or if you need to scan a code on your own screen.

Frequently Asked Questions

Do I need Wi-Fi to scan a QR code?

No. Scanning the code itself does not require an internet connection—your phone reads the code locally. However, if the code links to a website, you will need Wi-Fi or mobile data to open that page. Some codes contain offline information like contact details or calendar events, which open without internet.

Can I scan a QR code from a photo I already took?

Yes, on most phones. Open your Photos or Gallery app, select the photo containing the QR code, and look for a "Scan QR Code" option or button. On iPhone, you can also open the image in the Camera app and it will recognize the code. On Android, this feature varies by phone model—if your default camera does not support it, use a third-party QR scanner app and select the photo from your gallery.

Is it safe to scan QR codes from strangers?

QR codes themselves are safe—they are just data. However, a code could link to a malicious website or phishing page designed to steal information. Always look at the preview notification before tapping, and avoid scanning codes from untrusted sources. If a code's preview shows a suspicious or unexpected link, do not open it.

Why does my phone say "No Wi-Fi network found" when I scan a code?

Some QR codes contain Wi-Fi connection information rather than a website link. Your phone is trying to connect to a Wi-Fi network whose name or password is encoded in the code. Check that the network name is correct and that you are in range of that router. If the network does not exist or is not broadcasting, your phone cannot connect.

Can I create my own QR code?

Yes. Search for "free QR code generator" online, enter the website link or information you want to encode, and the generator will create a code you can read and print or share. These tools are free and do not require any technical knowledge.