Taking a temperature with an Exergen temporal scanner

An Exergen temporal scanner reads body temperature by measuring infrared heat from the temporal artery, a blood vessel that runs across the forehead just under the skin. You hold the scanner about half an inch away from the center of the forehead and press the button once. The device displays the temperature on a small screen in about one second. Unlike ear thermometers, temporal scanners work on people of any age and do not require you to insert anything into the ear canal.

The scanner works best when the forehead is dry and not covered by hair, a hat, or a headband. If someone has been sweating heavily or has just come in from the cold, wait a few minutes before taking their temperature so the reading is accurate. The device itself needs to be at room temperature before use—if you have been carrying it in a cold car or a warm pocket, let it sit for about 15 minutes before you take a reading.

Key Takeaways

  • Hold the scanner about half an inch from the center of the forehead, press the button once, and read the temperature on the screen within one second.
  • The forehead must be dry and uncovered for an accurate reading; wait a few minutes after sweating or coming in from cold weather.
  • Let the scanner sit at room temperature for 15 minutes before use if it has been in a cold or warm environment.
  • Clean the lens with a dry cloth before each use to prevent dust or moisture from blocking the infrared sensor.
  • Most Exergen models store the last reading in memory, so you can check what was recorded without taking another temperature.

Step-by-step instructions for taking a reading

Start by making sure the person's forehead is visible and dry. If they are wearing a hat or headband, ask them to remove it. Brush away any hair that is covering the center of the forehead. Hold the scanner so the lens is pointing straight at the forehead, about half an inch away—roughly the width of your pinky finger. Do not touch the forehead with the scanner.

Press and release the button on the scanner. You will hear a short beep, and a number will appear on the screen. This is the temperature in Fahrenheit or Celsius, depending on how your scanner is set. Most Exergen models display the reading for about 10 seconds before the screen goes blank. Write down the temperature if you need to keep a record, or check the scanner's memory function to see the last reading taken.

If the reading seems wrong—for example, if it shows 96°F when the person feels feverish—take another reading after waiting 30 seconds. Make sure the forehead is still dry and the scanner lens is clean. A second reading that matches the first one is more reliable than a single unusual result.

Cleaning and maintaining your scanner

The lens of the scanner is the most important part to keep clean. Dust, sweat, or dried skin cells on the lens will block the infrared signal and give you a false low reading. Before each use, wipe the lens gently with a dry, soft cloth—a microfiber cloth or the corner of a clean shirt works well. Do not use water, alcohol, or cleaning solutions on the lens, as these can damage the sensor.

Store the scanner in a dry place at room temperature. Most Exergen models come with a protective case or pouch; use it to keep dust off the lens between uses. If the scanner has been stored in a very cold place (like a car in winter) or a very warm place (like a sunny windowsill), let it sit indoors for 15 minutes before taking a temperature. This allows the internal sensor to adjust to room temperature and give you an accurate reading.

Replace the batteries according to the manufacturer's instructions when the screen becomes dim or the scanner stops responding to the button press. Most Exergen temporal scanners use two AA or AAA batteries. Check your user manual for the exact battery type and replacement steps.

Common mistakes that lead to wrong readings

The most common error is holding the scanner too far from the forehead or at an angle instead of straight on. If the lens is more than an inch away or tilted to the side, the infrared sensor may pick up heat from the surrounding air instead of the temporal artery. Always aim for the center of the forehead and keep the scanner about half an inch away.

Another frequent mistake is taking a reading when the forehead is wet or covered. Sweat, water, or hair blocks the infrared signal and causes the scanner to read lower than the actual body temperature. If someone has just come out of the shower or has been exercising, wait at least 5 to 10 minutes before taking their temperature. Similarly, if the scanner lens is dirty, the reading will be falsely low. Wipe the lens before every use.

Some people press the button multiple times in quick succession, thinking this will give a more accurate reading. This does not help and may confuse the scanner. Press the button once, wait for the beep, and read the result. If you want to take a second reading for comparison, wait at least 30 seconds between attempts.

Understanding the temperature display and settings

Most Exergen temporal scanners display the temperature in large numbers on a small LCD screen. The reading appears about one second after you press the button. Some models show the temperature in Fahrenheit (°F), while others show Celsius (°C). Check your user manual to see how to switch between the two if your scanner has that option.

Many Exergen models have a memory function that stores the last one, three, or nine readings depending on the model. This is useful if you are monitoring someone's temperature over time. To view the stored readings, look for a "Memory" or "Recall" button on the scanner and press it. The screen will cycle through the saved temperatures, usually showing the most recent one first.

Some scanners also have a fever alarm that beeps or flashes if the reading is above a certain temperature threshold. Check your manual to see if your model has this feature and how to set the alarm temperature. The default is often 100.4°F (38°C), which is a common fever threshold for adults.

When to use a temporal scanner versus other thermometers

Temporal scanners are fast and non-invasive, making them a good choice for taking temperatures in young children, elderly people, or anyone who is uncomfortable with oral or ear thermometers. They work on people of any age, from newborns to adults. Because you do not insert anything into the ear or mouth, there is no risk of spreading germs between people if you clean the lens between uses.

Oral thermometers (placed under the tongue) and rectal thermometers are slightly more accurate than temporal scanners, but they take longer and require more cooperation from the person being measured. Ear thermometers are fast but can give false readings if the ear canal is blocked by wax or if the thermometer is not inserted correctly. Temporal scanners split the difference: they are faster than oral or rectal thermometers and do not require insertion like ear thermometers.

If you are taking temperatures in a medical setting or need the highest possible accuracy, ask a healthcare provider which type of thermometer they recommend. For home use and general fever screening, a clean temporal scanner gives you a reliable reading in about one second.

Frequently Asked Questions

Can I use a temporal scanner on a sleeping person?

Yes, but the reading may be slightly lower than if they were awake. Body temperature naturally drops a little during sleep. If you need to monitor a sleeping person's temperature, take the reading and note the time. If you take another reading after they wake up, the temperature may be slightly higher even if they do not have a fever.

What temperature counts as a fever?

A temporal scanner reading of 100.4°F (38°C) or higher is generally considered a fever in adults and children over three months old. Infants under three months old may have a fever at a lower temperature; ask your pediatrician what threshold to use. Keep in mind that body temperature varies throughout the day and can be higher in the afternoon or after exercise.

Why does my scanner give different readings each time I use it?

Small differences between readings (within 0.5°F or 0.3°C) are normal and do not mean the scanner is broken. Body temperature changes slightly from moment to moment. If you are getting readings that differ by more than 1°F, check that the forehead is dry, the lens is clean, and you are holding the scanner about half an inch away and straight on. If the problem continues, the scanner may need new batteries or repair.

Can I use a temporal scanner through a forehead sticker or patch?

No. Any covering on the forehead—including stickers, patches, makeup, or sunscreen—will block the infrared signal and give you a false reading. Make sure the forehead is bare and clean before taking a temperature.

How often should I replace the batteries?

This depends on how often you use the scanner. Most Exergen models use two AA or AAA batteries and will run for hundreds of readings before the batteries need replacing. You will notice the screen becoming dim or the scanner not responding to button presses when the batteries are low. Replace them at that point according to your user manual.