What the iTero Scanner Does

The iTero scanner is a handheld camera that takes a three-dimensional digital picture of your teeth and gums in about 60 seconds. Instead of biting down on impression trays filled with goopy material, you sit still while the dentist or orthodontist moves the wand slowly across your upper and lower teeth. The scanner sends light waves into your mouth and reads how they bounce back, building a complete 3D model on a computer screen in real time.

The result is a digital file your orthodontist can rotate, zoom, and measure on screen. They can see exactly how your teeth are positioned, how they fit together, and where they need to move. This file becomes the blueprint for your treatment plan—whether that is braces, aligners, or other orthodontic work.

Key Takeaways

  • The iTero scanner uses light waves to build a 3D digital model of your teeth in about one minute, with no impression material needed.
  • The scan shows your orthodontist the exact position and angle of every tooth, which they use to design your treatment plan.
  • Digital scans are more accurate than traditional impression trays and can be stored, shared, and updated throughout your treatment.
  • The scanner works best when your teeth are clean and dry, so your dentist will ask you to rinse and may wipe your teeth before scanning.
  • You will still need X-rays and a physical exam; the iTero scan is one tool among several your orthodontist uses to plan your care.

How the Light Waves Create a 3D Image

The iTero uses a technology called structured light scanning. The wand projects a pattern of light onto your teeth—you will see a faint red or blue glow—and a camera inside the scanner reads how that light pattern warps and bends as it hits the curves and angles of your teeth. The scanner takes thousands of these snapshots as the dentist moves it slowly across your mouth, building up a point cloud: millions of tiny dots that map the exact surface of each tooth.

The software then stitches all these snapshots together into one seamless 3D model. You can watch this happen on the monitor in real time. If the dentist misses a spot or the image is blurry, they can rescan that area right away. The whole process takes longer to describe than to do.

This is different from traditional impression trays, which capture only a flat, two-dimensional mold. The 3D model lets your orthodontist see how your teeth are tilted, rotated, and spaced in three dimensions at once.

Why Orthodontists Use the iTero Instead of Impression Trays

Traditional impression trays require you to bite down on a tray of alginate or silicone putty for several minutes. The material can taste bad, trigger a gag reflex, and sometimes distort slightly as it sets. The resulting mold is also bulky to store and difficult to modify if the dentist needs a second copy.

The iTero scan is faster, more comfortable, and produces a file that never degrades. Your orthodontist can email the scan to a lab, compare it to scans from earlier in your treatment, or use it to show you exactly what your teeth will look like after treatment. Many patients also find it reassuring to see their own teeth on screen during the appointment.

The digital file is also more precise. The scanner captures details down to 10 micrometers—about one-tenth the width of a human hair—so the treatment plan based on that scan is more accurate from the start.

What Happens After Your Scan Is Taken

Once the scan is complete, your orthodontist reviews it on their computer. They measure the angles of your teeth, the gaps between them, and how your upper and lower teeth meet. They use this information to decide whether you need braces, aligners, or another treatment, and what the sequence of tooth movements should be.

If you are getting clear aligners, the scan is sent to the aligner company's lab. Their software uses your 3D model to design each aligner tray—usually 20 to 40 trays total—so that each one moves your teeth a tiny bit closer to the final position. You receive all your trays at once or in batches, and you switch to a new tray every one to two weeks.

If you are getting braces, the scan helps your orthodontist plan which teeth to move first and how much pressure to explore. Some offices also use the scan to create a custom wire or bracket setup tailored to your mouth.

What You Need to Do Before Your Scan

Your teeth should be clean and as dry as possible. Your orthodontist will usually ask you to rinse your mouth with water and may wipe your teeth with gauze or a tissue to remove saliva. If you have heavy plaque or tartar buildup, they may ask you to brush or have a cleaning first, because the scanner reads the surface of your teeth and gums, not what is underneath.

You do not need to do anything special at home before your appointment. You can eat and drink normally. Just brush your teeth as you normally would before any dental visit.

If you are wearing lipstick or other makeup, it will not interfere with the scan, but some offices ask you to remove it so the images look cleaner on screen. Ask your orthodontist's office when you schedule whether they have any prep instructions.

Limitations and What the Scanner Cannot Do

The iTero scan shows only the surfaces of your teeth and gums that the camera can see. It does not show the roots of your teeth or how they sit in your jawbone. That is why your orthodontist will still take X-rays—usually a panoramic X-ray and a cephalometric (side-view) X-ray—to see the full picture.

The scan also cannot measure your bite force, detect cavities, or assess bone density. It is one tool in your orthodontist's toolkit, not a replacement for a full exam. Your orthodontist will still look at your teeth in person, feel your bite, and ask about your medical history.

If you have very crowded teeth or teeth that overlap heavily, the scanner may have trouble capturing the inner surfaces of some teeth. In those cases, your orthodontist may take a traditional impression as a backup or rescan after moving a few teeth to make the rest easier to image.

How Scans Are Stored and Used Over Time

Your iTero scan is stored digitally in your orthodontist's records system. They can pull it up at any appointment to compare your progress. If you switch orthodontists, you can ask for your scan file to be sent to your new provider—it is your record, just like X-rays.

Some orthodontists use scans to create time-lapse videos showing your teeth moving from start to finish. This can be motivating to watch and helps you understand what the treatment is doing. The scan file can also be used to order replacement aligners if you lose or damage a tray, because your orthodontist can see exactly which stage of treatment you were on.

Digital scans last indefinitely if stored properly. Unlike traditional molds, which can crack, shrink, or get lost, a digital file is backed up and retrievable for years.

Frequently Asked Questions

Does the iTero scanner hurt or feel uncomfortable?

No. The scanner does not touch your teeth or gums—it only shines light on them. You will feel the wand moving slowly in your mouth, but there is no pressure, vibration, or sensation beyond that. Some people find it easier than biting down on an impression tray because you can breathe normally and there is no gag reflex trigger.

Can the scanner work if I have crowns, bridges, or implants?

Yes. The scanner reads the surface of any material, so it works on crowns, bridges, implants, and fillings just as well as on natural teeth. If you are planning to replace a crown or implant, your orthodontist will note that in your treatment plan so the new restoration fits your teeth after they have moved.

How long does the scan take?

The actual scanning usually takes 60 to 90 seconds. Your orthodontist will move the wand slowly across your upper teeth, then your lower teeth, then take a few extra shots of how your teeth fit together. The whole appointment, including exam and X-rays, typically runs 30 to 45 minutes.

Will I see the scan on screen during my appointment?

Usually yes. Most offices show you the 3D model as it builds in real time, and many let you rotate it and zoom in to see your teeth from different angles. This helps you understand your orthodontist's treatment plan and see exactly where your teeth are now versus where they need to go.

What if the scan comes out blurry or incomplete?

Your orthodontist will rescan the area right away. Because the scan happens in real time, they can see when ready if a section did not capture clearly and fix it before you leave. You will not have to come back for a second appointment.