What TSA scanners actually see
TSA uses two main types of scanners at airport checkpoints: millimeter wave scanners and backscatter X-ray machines. Millimeter wave is far more common now. These scanners work by sending radio waves at your body and reading what bounces back — they see the outline of your body and anything you're carrying, but not inside your body or through dense materials like metal.
The image a TSA officer sees on the monitor looks like a chalk outline: your silhouette in white against a dark background, with anything in your pockets, waistband, or bag showing as brighter spots. The scanner cannot see through your skin, into your stomach, or into a closed metal container. It also cannot identify what something is made of — only that something is there.
Backscatter X-ray machines, which are older and less common now, work differently. They bounce low-dose X-rays off your body and read the reflection. These were phased out at most airports after 2013 because millimeter wave technology proved faster and raised fewer privacy concerns.
Key Takeaways
- Millimeter wave scanners send radio waves at your body and read what bounces back, showing your outline and any objects you're carrying as a silhouette image.
- The scanner cannot see through your skin, into closed metal containers, or identify what materials something is made of — only that an object is present.
- If the scanner detects something the officer cannot identify, you will be asked to remove it or undergo a pat-down search.
- Backscatter X-ray machines, which used low-dose X-rays, are no longer standard at most U.S. airports.
- The image is viewed only by the TSA officer at the checkpoint and is not stored or transmitted elsewhere.
How the image gets created and who sees it
When you step into a millimeter wave scanner, the machine sends radio waves across your body in a spiral pattern, starting at your feet and moving upward. The waves bounce off your skin and any objects on you, and sensors inside the machine pick up those reflections. A computer then assembles those reflections into a two-dimensional image that appears on a monitor in front of the TSA officer.
The officer stands at the checkpoint and watches the image appear in real time. If the scan is clear — meaning no suspicious objects and nothing the officer cannot identify — you move forward. The image is not stored, recorded, or sent anywhere else. It exists only on that monitor for the few seconds the officer is looking at it, then it is deleted.
If the scanner detects something the officer cannot identify or something that looks out of place, the officer will ask you to remove the item, open your bag, or step aside for a pat-down search. This is the most common reason for a secondary search at the checkpoint.
What the scanner can and cannot detect
Millimeter wave scanners are very good at finding objects on the surface of your body or in your clothing — phones, keys, belts, liquids in bottles, electronics in bags. They show density differences well, so a solid object stands out clearly against your body outline.
The scanner cannot see through metal, so a metal belt buckle, underwire bra, or metal zipper will show up as a bright spot, but the officer cannot see what is behind it. This is why TSA sometimes asks you to remove a belt or open a jacket — they need to visually confirm what the scanner detected. The scanner also cannot see through dense materials like lead or thick plastic, and it cannot see inside your body or into a sealed metal container.
The scanner is not designed to identify what something is made of. It shows that an object is there, but not whether it is aluminum foil, a phone, or a water bottle. The officer makes that information by looking at the shape and density of the image, and by asking you what it is if they are unsure.
Why some people are sent to secondary screening
If the scanner image shows something the officer cannot when ready identify, or if something appears in an unusual location, you will be asked to remove it or undergo additional screening. Common reasons include items in jacket pockets, thick belts, electronic devices, or anything in a carry-on bag that the scanner cannot clearly resolve.
Secondary screening usually means a TSA officer will ask you to open your bag, remove the item in question, or submit to a pat-down search. A pat-down is a physical search where an officer runs their hands over your clothing to feel for objects. You can request a same-gender officer and can have a companion present during the search.
If you know you are carrying something that might trigger a secondary search — a large electronic device, a tool, a medical device — you can remove it before you enter the scanner and place it in a bin. This often speeds up the process because the officer can see it clearly from the start.
The difference between millimeter wave and older X-ray scanners
Millimeter wave scanners use radio waves, which are non-ionizing radiation — the same type used in cell phones and WiFi. Backscatter X-ray machines used ionizing radiation, which is the same type used in medical X-rays but at a much lower dose. The TSA determined that millimeter wave technology was faster, equally effective, and raised fewer health and privacy concerns, so most airports switched to it by 2013.
You may still encounter a backscatter machine at some airports, but it is rare. The image quality is similar — a silhouette with bright spots where objects are — but the scanning process takes slightly longer. Both types of scanners work on the same principle: send energy at your body, read what bounces back, and create an image.
What happens if you refuse to go through the scanner
If you decline to go through the scanner, TSA will offer you a pat-down search as an alternative. You cannot skip both — one of the two is required to pass through the checkpoint. A pat-down takes longer than a scanner, usually five to ten minutes, and involves a TSA officer physically searching your clothing and body.
You have the right to request a same-gender officer and to have a companion or witness present during the pat-down. If you refuse both the scanner and the pat-down, TSA will not allow you to proceed through the checkpoint, and you will not be able to board your flight.
How TSA uses the scanner image to make decisions
The TSA officer uses the scanner image to decide whether you need secondary screening. The officer is looking for three things: objects that should not be in a carry-on bag (like certain tools or weapons), objects that are suspicious or unidentifiable, and objects in locations that do not make sense (like something in a jacket pocket that the officer cannot see clearly).
The officer does not use the scanner to judge you or to make assumptions about you as a person. The image is purely functional — it is a tool to detect objects that might be a security risk. If the officer sees something they cannot identify, they will ask you what it is. If you explain it, and it is not prohibited, you move forward.
The scanner image is also used to train new TSA officers. Images of common items — phones, keys, medications, electronics — are used in training so officers learn what normal objects look like on the scanner and can quickly distinguish them from prohibited items.
Frequently Asked Questions
Can TSA scanners see through clothing?
Millimeter wave scanners can see the outline of your body and anything you are carrying, but they cannot see through your skin or into your body. They show your silhouette and the objects on you as a two-dimensional image. The scanner cannot see through dense materials like metal or thick plastic.
Is the scanner image stored or shared?
No. The image appears on the monitor at the checkpoint and is deleted when ready after the officer reviews it. It is not stored, recorded, transmitted, or shared with any other agency. The only record kept is whether you passed or were sent to secondary screening.
Do TSA scanners use radiation?
Millimeter wave scanners use radio waves, which are non-ionizing and the same type used in cell phones. They do not use the type of radiation used in medical X-rays. The dose of energy is extremely low and poses no health risk according to the TSA and the FDA.
What should I remove before going through the scanner?
Remove your shoes, belt, jacket, and anything in your pockets. Place electronics larger than a phone, like laptops and tablets, in a bin. Keep your ID and boarding pass in your hand. Liquids, gels, and aerosols must be in a quart-sized bag. These items do not have to go through the scanner if you remove them first.
Why did TSA stop using backscatter X-ray machines?
Backscatter machines used ionizing radiation and took longer to scan each person. Millimeter wave technology proved faster, equally effective at detecting prohibited items, and raised fewer privacy and health concerns. Most airports completed the switch by 2013.