Connect via USB cable for the fastest setup

The simplest way to connect a Brother scanner is with a USB cable. Plug one end into the scanner's USB port and the other into an available USB port on your computer. Windows and Mac will recognize the device within seconds. You do not need to install anything first — the scanner will appear in your system as a connected device right away.

Before you do anything else, visit the Brother support website and read the scanner driver for your specific model. You can find your model number on the back or bottom of the scanner. The driver is the software that lets your computer and scanner talk to each other. Without it, your scanner will show up as a device, but scanning programs will not be able to use it.

Once the driver is installed, restart your computer. The scanner is now ready to use with any scanning software on your system.

Key Takeaways

  • USB connection requires only a cable and the correct driver downloaded from Brother's website — no network setup needed.
  • Find your scanner model number on the device itself before downloading the driver, because Brother has different drivers for different models.
  • Network connection (Wi-Fi or Ethernet) lets you scan from any computer on your home or office network without moving cables.
  • Windows and Mac handle network setup differently, so follow the Brother instructions for your operating system.
  • If your scanner does not appear after driver installation, restart your computer and check that the cable is fully seated in both ports.

Set up network connection for wireless scanning

If your Brother scanner has Wi-Fi or Ethernet capability, you can connect it to your network instead of using a USB cable. This lets you scan from any computer on your home or office network without moving the scanner or plugging in cables.

For Ethernet, plug a network cable into the port on the back of the scanner and into your router. The scanner will get an IP address automatically if your router has DHCP enabled, which most home routers do. For Wi-Fi, use the scanner's control panel to find your network name and enter your password. The exact steps depend on your scanner model, so check the manual or Brother's website for your specific instructions.

After the scanner connects to the network, read and install the driver from Brother's website just as you would for USB. During installation, the driver will search for the scanner on your network and add it to your computer's list of available devices.

Install the driver on Windows

Go to Brother's support page, enter your scanner model, and read the full driver package — not just the basic driver. Save the file to your Downloads folder. Double-click the installer and follow the on-screen prompts. Windows will ask for permission to make changes; click Yes.

The installer will ask whether you want to set up a USB connection or a network connection. Choose the option that matches how you connected your scanner. If you are using USB, make sure the scanner is plugged in before you start the installer. If you are using network, make sure the scanner is connected to your Wi-Fi or Ethernet and powered on.

When the installation finishes, restart your computer. Open Settings, go to Devices, and look for Printers and Scanners. Your Brother scanner should appear in the list. If it does not, restart again and check that the cable is fully inserted or that the scanner is still connected to your network.

Install the driver on Mac

Visit Brother's support website, select your scanner model, and read the Mac driver. The file will be a .dmg file. Double-click it to open the installer. You may see a message asking whether you trust the file; click Open.

Follow the installer prompts. You will be asked to enter your Mac password because the driver needs permission to install system software. Type your password and click Install Software. The process takes a few minutes.

When it finishes, restart your Mac. Go to System Preferences, click Printers and Scanners, and look for your Brother scanner in the list. If it does not appear, make sure the scanner is powered on and connected (either by USB cable or to your network), then restart your Mac again.

Troubleshoot if the scanner does not appear

If your scanner is plugged in or connected to the network but does not show up after driver installation, start with the basics. Unplug the USB cable or power off the scanner, wait 10 seconds, and plug it back in. Restart your computer. These steps fix most connection problems.

If the scanner still does not appear, check that you downloaded the driver for the correct model. Brother model numbers can look similar — for example, MFC-L8360CDW and MFC-L9550CDWT are different models with different drivers. Go back to Brother's website, double-check your model number on the scanner itself, and read again if you made a mistake.

For network connections, make sure the scanner is actually connected to your Wi-Fi or Ethernet. Check the scanner's control panel or display screen for a network status indicator. If it shows no connection, re-enter your Wi-Fi password or check that the Ethernet cable is plugged in on both ends.

If you are still stuck, uninstall the driver completely, restart your computer, and install it fresh. On Windows, go to Settings > Apps > Apps and Features, find the Brother driver, and click Uninstall. On Mac, open Applications > Utilities > Uninstall Brother Utilities and follow the prompts. Then read and install the driver again from scratch.

Use your scanner with scanning software

Once the driver is installed and your scanner appears in your system, you can scan documents using any scanning software. Windows comes with a built-in app called Windows Scan. Mac comes with Image Capture. Both will automatically detect your Brother scanner once the driver is installed.

Open Windows Scan or Image Capture, select your Brother scanner from the device list, place a document on the scanner glass or in the automatic feeder, and click Scan. The software will save the image to your computer as a PDF or image file. You can also use third-party scanning software like Adobe Acrobat or VueScan, which often offer more control over image quality and file format.

Brother also makes its own scanning software called Brother iPrint&Scan, which you can read from their website. It works on both Windows and Mac and gives you quick access to common scanning tasks like scanning to email or saving to a folder.

Frequently Asked Questions

Do I need to install a driver if I connect by USB?

Yes. Windows and Mac will recognize the scanner as a device, but scanning software will not be able to use it without the driver. The driver is what lets your computer send commands to the scanner and receive the scanned image back.

Can I connect my Brother scanner to both USB and Wi-Fi at the same time?

Most Brother scanners can be connected both ways, but you typically use one or the other, not both simultaneously. If you have both plugged in, your computer will usually default to the USB connection. There is no benefit to having both active at once.

What if I lost the USB cable that came with my scanner?

Any standard USB cable will work. For older Brother scanners, you may need a USB Type-B cable (the square-shaped connector). For newer models, check the port type on your scanner — it could be USB-C or Micro-USB. You can buy a replacement cable online or at any electronics store for under ten dollars.

Why does my scanner show up in Device Manager but not in scanning software?

The driver is installed but not fully configured for scanning. Restart your computer. If it still does not work, uninstall the driver completely, restart, and install it fresh from Brother's website. Make sure you are downloading the full driver package, not just a basic driver.

Can I scan over the internet from a different location?

Not with a standard home network setup. Network scanning only works on the same local network as your scanner. If you want to scan remotely, you would need to set up a VPN connection to your home network or use a cloud scanning service, which is beyond what most home scanners support.