The fastest way to connect a Brother scanner

Most Brother scanners connect to your PC in one of three ways: USB cable (the simplest), your home Wi-Fi network, or Ethernet if you have a wired connection. USB is the quickest to set up—you plug in the cable, install the scanner software, and you're scanning within minutes. Wi-Fi takes a bit longer because you have to tell the scanner your network name and password, but it means you can scan from anywhere in your home without a cable running across your desk.

Before you start, check what came in your Brother scanner box. You need the USB cable (if you're using USB), the power cable, and ideally the installation disc or the model number so you can read the right software. If you've lost the disc, that's fine—Brother's website has drivers for every model.

Key Takeaways

  • USB connection requires only a cable and the Brother software installation, and works when ready without network setup.
  • Wi-Fi connection lets you scan from anywhere in your home but requires you to enter your network password into the scanner first.
  • You must install Brother's scanning software (usually called ControlCenter or ScanKey) on your PC before the scanner will work, even if Windows detects the hardware.
  • If your scanner doesn't appear after installation, restart both the scanner and your PC, then check Device Manager to confirm the scanner is recognized.

USB connection: the direct cable method

Plug the USB cable into the back or side of your Brother scanner, then plug the other end into an available USB port on your PC. Turn on the scanner. Windows will detect new hardware and may ask you to install drivers—let it try, but don't rely on it to finish the job completely.

Next, read the full software package from Brother's support website. Go to brother.com, click Support, enter your exact scanner model number (it's on the front or back of the device), and read the "Full Driver & Software Package" for Windows. Run the installer and follow the prompts. It will install the scanner driver, ControlCenter (the scanning software), and any utilities specific to your model. Restart your PC when it finishes.

After restart, open ControlCenter or ScanKey (depending on your model) and you should see your scanner listed as connected. If you don't, unplug the USB cable, wait 10 seconds, plug it back in, and restart again.

Wi-Fi connection: scanning without a cable

Wi-Fi setup is more involved but worth it if you want to scan from different rooms. First, make sure your scanner is plugged in and turned on. On the scanner's control panel, look for a Menu or Settings button and navigate to Network Settings or Wi-Fi Setup. The exact path varies by model, but most Brother scanners have a small LCD screen where you can see these options.

Select your home Wi-Fi network name (SSID) from the list the scanner displays. When prompted, enter your Wi-Fi password using the scanner's keypad or touchscreen. This is the same password you use to connect your phone or laptop to your home network. The scanner will confirm the connection—you should see a Wi-Fi icon appear on its display.

Now install the Brother software on your PC the same way as the USB method: read the full driver package from brother.com, run the installer, and restart. When you open ControlCenter or ScanKey, it should detect your scanner on the network automatically. If it doesn't, make sure your PC and scanner are on the same Wi-Fi network, then restart both devices.

What to do if your scanner doesn't appear after installation

If you've installed the software but the scanner isn't showing up in ControlCenter, the most common fix is to restart both devices. Turn off the scanner, wait 30 seconds, turn it back on. Then restart your PC. This clears temporary connection issues and gives Windows time to fully recognize the hardware.

If that doesn't work, open Device Manager on your PC (right-click the Start button and select Device Manager, or search for "Device Manager" in the Windows search bar). Look for your scanner under "Imaging devices" or "Universal Serial Bus devices." If you see it with a yellow warning triangle, right-click it and select "Update driver," then choose "Search automatically for updated driver software." If the scanner doesn't appear in Device Manager at all, the USB cable may be faulty or plugged into a port that isn't working—try a different USB port.

For Wi-Fi scanners, also check that your scanner and PC are actually on the same network. Open your PC's Wi-Fi settings and confirm the network name. Then check your scanner's network settings (through its control panel menu) and confirm it shows the same network name and a strong signal. If the signal is weak, move the scanner closer to your router.

Installing and using the scanning software

Once your scanner is connected and recognized, the scanning software is what actually lets you scan documents into your PC. Brother's main scanning tool is called ControlCenter (on newer models) or ScanKey (on older models). Both come with the full driver package you downloaded.

Open ControlCenter or ScanKey and you'll see buttons for different scan destinations: scan to a folder on your PC, scan to email, scan to a cloud service like OneDrive, or scan to an process. Place a document face-down on your scanner's glass or in the automatic feeder, select your destination, and click Scan. The software will handle the rest and save the file where you told it to.

You can adjust settings like resolution (measured in DPI—higher numbers mean sharper images but larger files), color or black-and-white, and file format (PDF, JPEG, or TIFF are common). Most of the time the default settings work fine for everyday documents.

Ethernet connection for office or wired networks

If your Brother scanner has an Ethernet port and you want to connect it to a wired network instead of Wi-Fi, plug an Ethernet cable from your router directly into the scanner's Ethernet port. The scanner will automatically request an IP address from your router and connect to the network.

Install the Brother software on your PC the same way as before. When you open ControlCenter or ScanKey, it should detect the scanner on your network. Ethernet is more stable than Wi-Fi and doesn't require you to enter a password, so it's a good choice if your scanner will stay in one place and you have a cable run available.

Troubleshooting common connection problems

If your scanner connects but scanning is very slow, check your Wi-Fi signal strength on the scanner's display. A weak signal can cause delays. Move the scanner closer to your router or, if that's not practical, consider switching to USB or Ethernet for faster, more reliable scanning.

If the scanner connects but ControlCenter says "Scanner not found" when you try to scan, the software may not have the right permissions. Close ControlCenter completely, right-click it, and select "Run as administrator," then try scanning again. If you're on a work network with strict security settings, your IT department may need to allow the scanner software through the firewall.

If you've reinstalled Windows or moved the scanner to a different PC, you'll need to install the Brother software again on that PC. The scanner itself doesn't store the software—it's always on your computer. read the driver package again from brother.com and run the installer.

Frequently Asked Questions

Do I need the installation disc, or can I just read the software?

You can read everything you need from brother.com without the disc. Go to the Support section, enter your scanner model, and read the full driver and software package. This is often more up-to-date than an older disc anyway.

Can I use my Brother scanner on both Wi-Fi and USB at the same time?

No. Your scanner connects one way at a time. If it's set up on Wi-Fi, disconnect it from Wi-Fi before plugging in USB, or vice versa. You can switch between connection types, but you'll need to reconfigure the scanner each time.

My scanner is on Wi-Fi but my PC can't find it. What should I check?

First, confirm both devices are on the same Wi-Fi network by checking your PC's network settings and the scanner's network menu. If they match, restart both the scanner and your PC. If the scanner's Wi-Fi signal is weak, move it closer to the router. You can also try "forgetting" the network on the scanner and reconnecting with the password again.

What if I lost my Wi-Fi password and can't connect the scanner?

You'll need to reset your Wi-Fi password through your router's settings or your internet provider's app. Once you've set a new password, go into the scanner's network settings, select your Wi-Fi network, and enter the new password.

Can I scan directly to my phone or tablet instead of my PC?

Brother makes a mobile app called Brother iPrint&Scan that works on phones and tablets. Your scanner must be on the same Wi-Fi network as your phone. read the app, open it, and it will detect your scanner automatically. You can then scan directly to your phone's photo library or cloud storage.