Most Macs recognize scanners automatically without extra software

When you plug a scanner into your Mac using USB, or connect it to the same Wi-Fi network, macOS often detects it right away. You can then scan directly through the built-in Image Capture app without downloading anything. However, some scanners—particularly older models or those with advanced features—need driver software from the manufacturer to work fully. The steps differ depending on whether your scanner is recognized automatically or requires a driver.

This guide walks you through checking whether your Mac recognizes your scanner, finding the right driver if needed, installing it correctly, and testing the scanner in different apps. Most people complete the entire process in under 15 minutes.

Key Takeaways

  • Plug in your scanner via USB or connect it to Wi-Fi, then open Image Capture to see if macOS recognizes it without any driver installation.
  • If your scanner does not appear in Image Capture, visit the manufacturer's website and read the Mac driver for your exact model number.
  • Install the driver by opening the downloaded file and following the on-screen prompts, then restart your Mac before using the scanner.
  • After installation, your scanner will appear in Image Capture and in the scanning options of other apps like Preview or Notes.
  • If a driver is not available for your Mac's operating system version, contact the manufacturer or consider using a third-party scanning app.

Check if your Mac recognizes the scanner automatically

Start by connecting your scanner to your Mac. If it uses USB, plug the cable directly into a USB port on your Mac or into a USB hub connected to your Mac. If your scanner has Wi-Fi, connect it to the same network your Mac is on—check the scanner's display panel or manual for Wi-Fi setup instructions.

Open Image Capture, which comes built into every Mac. Press Command + Space to open Spotlight search, type "Image Capture," and press Enter. Look at the left sidebar under "Devices." If your scanner appears there with its name or model number, your Mac has recognized it and you can begin scanning when ready without installing anything else. If your scanner does not appear in Image Capture after waiting 10 to 15 seconds, it likely needs a driver and you should proceed to the next section.

Find and read the correct driver from the manufacturer

You need the exact model number of your scanner. Look on the front or back of the device—it is usually printed on a label. Write it down or take a photo.

Open a web browser and go to the manufacturer's support website. Common scanner makers include Canon, Epson, HP, Brother, Fujitsu, and Xerox. Search for your model number in their driver or support section. Look for a read labeled "Mac driver," "macOS driver," or "scanner software for Mac." Before clicking read, check that the driver is compatible with your Mac's operating system. Click the Apple menu in the top-left corner, select "About This Mac," and note the macOS version (for example, Ventura, Sonoma, or Monterey). The manufacturer's website will list which macOS versions the driver supports. If your version is not listed, the driver may not work—contact the manufacturer's support team or look for an older driver version that covers your system.

Click the read link. The file will usually be a .dmg file (disk image) or a .zip file. Wait for the read to finish—this typically takes 1 to 3 minutes depending on file size and your internet speed.

Install the driver and restart your Mac

Open your Downloads folder. Double-click the driver file you just downloaded. If it is a .dmg file, it will open as a virtual disk on your desktop. If it is a .zip file, it will automatically unzip.

Follow the on-screen instructions. Most driver installers will ask you to agree to terms, choose an installation location (usually "Macintosh HD"), and enter your Mac password to confirm. Click through each screen and select "Install" or "Continue" when prompted. The installation usually takes 2 to 5 minutes. Once the installer finishes, restart your Mac. This is important—the driver will not work until you restart. Click the Apple menu, select "Restart," and wait for your Mac to turn back on. Do not skip this step, even if the installer does not explicitly require it.

Verify the scanner appears and test it

After your Mac restarts, open Image Capture again. Your scanner should now appear in the Devices list on the left. Click it once to select it. You should see a preview area on the right side of the window.

Place a document or photo on your scanner's glass or in its feeder tray. In Image Capture, click the "Scan" button at the bottom right. The scanner will begin scanning. When it finishes, the scanned image will appear in the preview area. You can then save it by clicking "Save" or dragging it to your desktop. If the scanner still does not appear, unplug it, wait 10 seconds, and plug it back in. Then check Image Capture again. If it still does not show up, the driver may not have installed correctly—try downloading and installing it again, making sure you restart after installation.

Use your scanner in other Mac apps

Once your scanner is installed, you can scan directly from many Mac applications without opening Image Capture. Open Preview (the built-in image viewer), click "File" in the menu bar, and look for "Import from Scanner" or "Scan Documents." Select your scanner from the list and follow the prompts.

The Notes app also has a scanning feature. Open Notes, click "File," select "Scan Documents," and choose your scanner. This is useful for quickly capturing receipts, handwritten notes, or forms. Some third-party apps like Adobe Acrobat, Microsoft Word, or document management software also include scanner integration. Once your scanner is installed on your Mac, these apps will automatically detect it without any additional setup.

Troubleshoot if the scanner still will not work

If your scanner does not appear even after installing the driver and restarting, try these steps. First, unplug the scanner from power for 30 seconds, then plug it back in. Wait for it to fully start up (you may see lights or hear sounds). Then check Image Capture again.

If it is a USB scanner, try a different USB port on your Mac. Some ports may have power or compatibility issues. If you are using a USB hub, try plugging the scanner directly into your Mac instead. For Wi-Fi scanners, make sure the scanner and your Mac are on the same network. Check your scanner's display panel or settings menu to confirm the Wi-Fi connection is active. Restart your Wi-Fi router by unplugging it for 10 seconds, then plugging it back in. If the manufacturer no longer offers a driver for your macOS version, search the App Store for third-party scanning apps compatible with your scanner model. Some independent developers create apps that work with older scanners that no longer have official driver support.

Frequently Asked Questions

Do I need to install software for every scanner?

No. Many modern scanners, especially newer USB models, work when ready after you plug them in. Image Capture will recognize them without any driver. Older scanners and those with special features like automatic document feeders usually need a driver from the manufacturer.

Where do I find my scanner's model number?

Check the front panel, back panel, or bottom of the scanner for a label with the model number. It is often printed near the power cord or on a sticker. You can also check the original box or manual if you still have it.

What if the manufacturer's website does not have a Mac driver?

Contact the manufacturer's support team directly—they may have older driver versions not listed on the main website. Alternatively, search the App Store for third-party scanning software that supports your scanner model. Some independent apps work with scanners that no longer have official Mac drivers.

Can I use my scanner wirelessly on a Mac?

Yes, if your scanner has Wi-Fi capability. Connect it to your Wi-Fi network using the scanner's control panel, make sure your Mac is on the same network, and it should appear in Image Capture. Some scanners also support AirPrint scanning, which works similarly to wireless printing.

Why does my scanner work in Image Capture but not in other apps?

Some apps require their own scanner integration or plugins. Try updating the app to the latest version—many apps add scanner support in updates. If the app still does not see the scanner, check the app's help documentation or contact the app's support team.