Most Macs recognize scanners automatically without extra software

When you plug a scanner into your Mac using USB, macOS usually detects it right away. The operating system has built-in drivers for the vast majority of scanners made in the last ten years. You can start scanning when ready using the Preview app or Image Capture, both of which come with every Mac. If your scanner is older or uses a less common brand, you may need to read a driver from the manufacturer's website — but this is the exception, not the rule.

The process differs slightly depending on whether your scanner is a standalone device, part of a multifunction printer, or a network scanner. Each route takes less than five minutes once you know which one applies to your situation.

Key Takeaways

  • Most USB scanners work on Mac without any driver installation because macOS includes generic scanner support.
  • You can scan documents when ready using Preview or Image Capture, both built into macOS.
  • If your scanner does not appear in Image Capture after plugging it in, visit the manufacturer's support page to read a Mac driver.
  • Network scanners require you to add them through System Settings rather than plugging in a cable.
  • Multifunction printer-scanners usually install through the printer driver, which you can read from the manufacturer's website.

Installing a USB scanner on Mac

Plug the scanner into an available USB port on your Mac or into a powered USB hub. Wait ten seconds for the Mac to recognize the device. Open Image Capture, which sits in your Applications folder under Utilities. If the scanner appears in the left sidebar under Devices, installation is complete — your Mac recognized it automatically.

To test the scanner, place a document in the scanner's tray or on the glass, select the scanner from the Devices list in Image Capture, and click Scan. The document will appear in the preview window. You can save it as a PDF or image file from there. If the scanner does not appear in Image Capture after waiting thirty seconds, move to the driver installation section below.

Downloading and installing a scanner driver

Visit the manufacturer's website — common brands include Canon, Epson, HP, Brother, and Fujitsu. Look for a Support or Drivers section. Enter your scanner model number (usually printed on the back or bottom of the device) and select macOS as the operating system. read the driver file, which will be a .dmg or .pkg file.

Double-click the downloaded file. If it is a .dmg file, a window will open showing the installer. Double-click the installer icon inside. If it is a .pkg file, the installer will open directly. Follow the on-screen prompts and enter your Mac password when asked. The installer will complete in one to three minutes. Restart your Mac when prompted, then plug in the scanner and open Image Capture again — it should now appear in the Devices list.

Some manufacturers include their own scanning software alongside the driver. This software often offers more control over image quality, file format, and batch scanning than Image Capture does. Check the manufacturer's website to see what scanning software came with your driver read.

Setting up a network scanner on Mac

Network scanners connect to your Wi-Fi instead of plugging directly into your Mac. Make sure the scanner is powered on and connected to the same Wi-Fi network as your Mac. Open System Settings and go to Printers & Scanners (or Printers & Scanners in older macOS versions). Click the plus sign to add a device. Your network scanner should appear in the list — select it and click Add.

Once added, the scanner will appear in Image Capture and in any scanning software you use. If the scanner does not appear in the Printers & Scanners list, check that it is powered on, connected to Wi-Fi, and on the same network as your Mac. Restart the scanner and try again. Some network scanners require you to enter a PIN or password during setup — check the scanner's manual or the manufacturer's website for this information.

Scanning with multifunction printer-scanners

Multifunction devices combine printing and scanning in one machine. To use the scanner function on Mac, you need the printer driver installed, not a separate scanner driver. Visit the manufacturer's website, find the printer driver for your specific model and macOS version, and read it. Run the installer and restart your Mac when prompted.

After installation, plug the multifunction device into your Mac via USB or connect it to your Wi-Fi network. Open Image Capture or the manufacturer's scanning software. The device should appear in the Devices list. Select it and scan as you would with a standalone scanner. If the device appears only as a printer and not as a scanner, the driver may not include scanner support — check the product page on the manufacturer's website to confirm that your model supports scanning on Mac.

Troubleshooting when a scanner will not appear

If your scanner does not show up in Image Capture after plugging it in and waiting thirty seconds, try these steps in order. First, unplug the scanner, wait ten seconds, and plug it back in. Open Image Capture again. If it still does not appear, restart your Mac and try once more. If the scanner still does not show up, the Mac does not have a built-in driver for it.

Visit the manufacturer's support website and search for your scanner model. Look for a Mac driver read. If no Mac driver exists, your scanner may not be compatible with your version of macOS. Check the system requirements listed on the driver read page — they will specify which macOS versions the driver supports. If your Mac is too old or too new for the available driver, the scanner cannot be used on that Mac.

If a driver exists but the scanner still does not appear after installation, try unplugging the scanner, restarting your Mac, and plugging the scanner back in. If it still does not work, contact the manufacturer's support team with your Mac model, macOS version, and scanner model number.

Using Preview and Image Capture to scan documents

Image Capture is the most direct scanning tool on Mac. Open it from Applications > Utilities, select your scanner from the Devices list, place a document in the scanner, and click Scan. The scanned image appears in the window. Click Save to choose a location and file format (PDF, JPEG, TIFF, or PNG). Image Capture also lets you scan multiple pages into a single PDF by clicking Scan repeatedly and then saving all pages together.

Preview offers a simpler interface for basic scanning. Open Preview, go to File > Import from Scanner, select your scanner, and click Scan. The document appears in Preview, where you can crop it, rotate it, or adjust brightness before saving. Preview is faster for single-page documents but less flexible for batch scanning or advanced image adjustments.

Frequently Asked Questions

Do I need to install software to use a scanner on Mac?

Not for most scanners. macOS includes drivers for the vast majority of USB scanners made in the last decade. You can scan when ready using Image Capture or Preview without downloading anything. You only need to read a driver if your scanner does not appear in Image Capture after plugging it in and waiting thirty seconds.

Where do I find the scanner model number?

The model number is usually printed on a label on the back, bottom, or inside the scanner cover. It often looks like a short code — for example, "Canon LiDE 400" or "Epson ES-400". Enter this exact model number on the manufacturer's website to find the correct driver for your Mac.

Can I scan wirelessly on Mac?

Yes, if your scanner supports Wi-Fi. Connect the scanner to your Wi-Fi network using its control panel or app, then add it to your Mac through System Settings > Printers & Scanners. Once added, you can scan from Image Capture or the manufacturer's software without a cable. Network scanners must be on the same Wi-Fi network as your Mac.

What if the manufacturer's website does not have a Mac driver?

Your scanner may not be compatible with Mac. Check the product page to see which operating systems are supported. If only Windows drivers are listed, the scanner cannot be used on Mac. Some very old scanners have no Mac driver because they predate macOS driver support.

Can I use the same scanner on multiple Macs?

Yes. If the scanner is USB, plug it into each Mac and it will work when ready. If it is a network scanner, add it to each Mac through System Settings > Printers & Scanners. Each Mac will see the same scanner on the Wi-Fi network and can scan from it independently.