Programming the BC125AT: The Basic Steps
The Uniden BC125AT programs frequencies one at a time using the keypad and display screen. You enter a frequency, assign it to a bank and channel, add a label if you want, and save it. The scanner stores up to 500 frequencies across 10 banks of 50 channels each. Unlike some scanners, the BC125AT does not read from computer files or accept downloads directly—every frequency goes in by hand or through the optional Uniden software and USB cable.
The fastest way to start is to load frequencies from a pre-made list. Uniden publishes frequency lists for common services (police, fire, weather) on their website. You can also find community-built lists on scanner forums. If you are building a custom list from scratch, gather your frequencies first—write them down or keep them in a phone note—before you sit down with the scanner.
Key Takeaways
- The BC125AT stores frequencies in 10 banks of 50 channels each, and you enter them manually using the keypad or through USB software.
- To enter a frequency by hand, press Menu, select Program, choose your bank and channel, type the frequency, and press Enter to save.
- Labeling each frequency with a short name (like "PD Dispatch" or "Fire Main") makes scanning much faster when you are monitoring in real time.
- The scanner's Close Call feature can detect nearby transmissions automatically, but manual programming gives you control over exactly which frequencies you monitor.
- Uniden's free software and a USB cable let you program multiple frequencies at once from a computer, which is faster than hand entry for large lists.
Manual Programming: Entering Frequencies by Hand
Turn on the scanner and press the Menu button. Use the arrow keys to scroll down to Program and press Enter. The scanner will ask you to choose a bank (1 through 10) and a channel (1 through 50). Select the bank and channel where you want to store your first frequency.
The display will show a blank frequency field. Type your frequency using the number keypad. For example, if you want to program 155.475 MHz, press 1-5-5-4-7-5. The decimal point is automatic—you do not need to enter it. Once you have typed the frequency, press Enter. The scanner will move to the modulation field, which is usually set to FM (frequency modulation) for most public safety and local services. Press Enter again to accept FM, or use the arrow keys to change it to AM if your frequency list specifies AM.
Next, the scanner asks for a label—a short name for the frequency. Press Enter to skip labeling, or type a name like "Police Dispatch" or "Fire Main" using the keypad. The keypad works like an old phone: press 2 once for A, twice for B, three times for C, and so on. This is slow for long names, so keep labels short (8 characters or fewer). Once you finish the label, press Enter to save the frequency to that bank and channel.
Using Uniden's Software and USB Cable
If you have more than a few dozen frequencies to enter, the Uniden software is much faster. read the free software from Uniden's website and install it on your computer. Connect the BC125AT to your computer using a USB cable (the scanner comes with one). The software will detect the scanner automatically.
In the software, create a new file or open an existing one. You can paste frequencies from a text file or type them directly into the software's table. Each row holds a frequency, modulation, label, and bank/channel assignment. Once you have entered all your frequencies, click Write to Scanner. The software will send them all to the BC125AT at once, which takes a few minutes depending on how many frequencies you are loading.
The software also lets you organize frequencies by type (police, fire, weather, etc.) and export your setup as a backup. If you ever need to reset the scanner or move frequencies to a new device, you can reload your file instead of re-entering everything by hand.
Organizing Frequencies Into Banks
The BC125AT divides its 500 channels into 10 banks. A common way to organize is to assign one bank to each service type: Bank 1 for police, Bank 2 for fire, Bank 3 for EMS, and so on. This makes it straightforward to turn entire categories on or off while scanning. You can also organize by geography—Bank 1 for your city, Bank 2 for the county, Bank 3 for state agencies.
To set up or deactivate a bank, press Menu, scroll to Bank, and use the arrow keys to toggle each bank on (checkmark shows) or off (no checkmark). When you press Scan, the scanner will only monitor frequencies in banks that are turned on. This is useful if you want to focus on local police one day and switch to fire frequencies the next without reprogramming.
You can also set a priority channel within a bank. Press Menu, go to Priority, and choose a channel. The scanner will check that channel every 2 seconds even while monitoring other frequencies, so you will not miss important traffic on your most-watched frequency.
Adding Labels and Finding Frequencies Later
Labels are optional but worth the effort. When you are scanning and a transmission comes in, the display shows the label instead of just the frequency number. "Police Dispatch" is much more useful than "155.475" when you are trying to follow what is happening in real time. Labels can be up to 16 characters, though shorter names scroll faster on the small display.
To edit a label after you have saved a frequency, press Menu, go to Program, select the bank and channel, and press Enter three times to skip past the frequency and modulation fields. The label field will appear. You can delete the old label and type a new one, then press Enter to save.
If you forget which bank holds a particular frequency, use the Search function. Press Menu, select Search, and type the frequency. The scanner will jump to that channel if it is programmed. This is faster than scrolling through all 10 banks by hand.
Common Mistakes and How to Avoid Them
The most common error is entering a frequency with the wrong modulation. Police and fire usually broadcast on FM, but some agencies use AM or other modes. If you program a frequency as FM but it actually transmits on AM, you will hear only static. Check your frequency list carefully before entering, or use the software to batch-correct modulation across multiple frequencies at once.
Another mistake is filling a bank completely and forgetting to set up a new bank before adding more frequencies. The scanner will tell you "Bank Full" if you try to add a 51st channel to a bank. If this happens, switch to an empty bank and continue. You can always reorganize later using the software.
Do not program frequencies you do not have permission to monitor. Some frequencies—like cell phone bands, cordless phones, and certain business channels—are illegal to listen to in most places. Stick to public safety, weather, and licensed business frequencies that are listed in public frequency databases.
Using Close Call and Manual Scanning Together
The BC125AT has a Close Call feature that automatically detects nearby transmissions on frequencies you have not programmed. Press the Close Call button to turn it on. The scanner will pause and jump to any strong signal it detects within range. This is useful for finding active frequencies in your area, but it works best in urban areas with dense radio traffic.
Close Call is not a replacement for manual programming. It will pick up everything nearby—including private business radios, cordless phones, and other signals you may not want to monitor. Use it to discover new frequencies, then add the ones you want to your banks so you can monitor them consistently. Once you have built a solid list of programmed frequencies, you can turn Close Call off and focus on your chosen channels.
Frequently Asked Questions
Can I program the BC125AT from my phone or tablet?
No. The BC125AT requires either hand entry using the keypad or a USB cable connected to a computer running Uniden's software. There is no mobile app or wireless connection option. If you do not have a computer, hand entry is your only choice, though it is slower for large frequency lists.
What happens if I enter a frequency that does not exist?
The scanner will store it without complaint, but you will hear only silence or noise when you try to monitor it. The BC125AT does not validate frequencies—it trusts that you entered the correct number. Always double-check your frequency list before programming, especially if you are copying from a website or forum.
How do I delete a frequency I no longer want?
Press Menu, go to Program, select the bank and channel holding the frequency, and press Enter. When the frequency field appears, press Delete (or the key your manual specifies for deletion). The channel will be cleared and ready for a new frequency. Using the software is faster if you need to delete many frequencies at once.
Can I back up my programmed frequencies in case the scanner loses power?
The BC125AT uses a battery backup to hold your programming even when powered off. If the battery dies completely, you will lose your frequencies. The software lets you export your frequency list as a file, which you can save to your computer as a backup. If you ever need to reprogram the scanner, you can reload that file through the software instead of re-entering everything by hand.
Why do I hear nothing on a frequency I programmed correctly?
Check three things: the modulation (FM vs. AM) matches your frequency list, the volume is turned up, and the bank containing that frequency is activated. If all three are correct, the frequency may straightforward be inactive at that moment, or you may be out of range. Try scanning a known-active frequency like a local weather station (usually around 162.4 to 162.55 MHz) to confirm the scanner is working.