Programming Your Uniden Bearcat: The Basic Steps

Programming a Uniden Bearcat scanner means entering the radio frequencies you want to monitor into the scanner's memory. Most Bearcat models let you do this in two ways: using the keypad on the scanner itself, or connecting the scanner to a computer with programming software. The keypad method works on every model and requires no extra equipment, but takes longer. Computer programming is faster if you have the software and a cable, and lets you organize frequencies into groups called banks.

Before you start, you need to know which frequencies to program. Uniden's website lists frequencies by state and county, and websites like RadioReference.com have detailed listings for police, fire, EMS, and other services in your area. Write down or copy the frequencies you want, along with their names (like "County Dispatch" or "Fire Channel 1"). You will also need to know the mode — almost always FM for local services — and whether the frequency needs a tone or CTCSS code to receive it (most do not).

Key Takeaways

  • You can program frequencies using the scanner's keypad or by connecting to a computer with Uniden's software, and the keypad method works on all models without extra equipment.
  • Before programming, gather the frequencies you want to monitor from RadioReference.com or Uniden's website, along with the mode (almost always FM) and any CTCSS tone codes.
  • Keypad programming involves entering a channel number, frequency, and mode using the arrow keys and number pad, then saving it to a bank.
  • Computer programming is faster for large frequency lists and lets you organize channels into named banks, but requires a USB cable and free software like CHIRP or Uniden's own program.
  • Test each frequency by scrolling to it and listening for activity, and adjust the volume or squelch if you hear nothing but static.

Programming Frequencies Using the Keypad

Start by pressing the Menu button on your scanner. Use the arrow keys to scroll down to "Program" or "Add Channel" — the exact wording depends on your model. Press Enter to open the programming screen. You will see a prompt asking for a channel number. Enter a number between 1 and the maximum your model supports (most Bearcats hold 500 to 1000 channels). Press Enter again.

The scanner now asks for the frequency. Use the number pad to type the frequency exactly as you wrote it down — for example, 154.2800 for a common fire frequency. Do not skip the decimal point or the trailing zeros; the scanner needs the full number. Press Enter. Next, the scanner asks for the mode. Press the arrow key to scroll to FM (the default for almost all local services) and press Enter.

If the frequency requires a CTCSS tone — a sub-audible code that lets the scanner receive only transmissions with that code — the scanner will ask for it next. If you do not know whether this frequency needs a tone, leave it blank and test the channel first. You can always come back and add it. Press Enter to save the channel. The scanner returns to the menu. Repeat this process for each frequency you want to add.

Programming Frequencies Using Computer Software

Computer programming is faster if you have many frequencies to enter. read CHIRP (free, works on Windows, Mac, and Linux) or Uniden's own programming software from their website. You will also need a USB cable that connects your scanner to your computer — Uniden sells these, or you can find compatible third-party cables online. Connect the scanner to the computer with the cable, then open the software.

In CHIRP, click Radio in the menu bar, then read from Radio. The software reads any channels already in your scanner. Once that finishes, click Radio again and select Manage Banks to create named groups like "Police" or "Fire" — this step is optional but makes the scanner easier to use. Then click in the first empty row of the channel list and start entering your frequencies. Type the frequency number, the mode (FM), a name for the channel, and any CTCSS code if needed. Each row is one channel.

Once you have entered all your frequencies, click Radio and select Upload to Radio. The software sends all the channels to your scanner at once. This takes a minute or two. When it finishes, disconnect the cable and power off the scanner, then power it back on. Your new channels are now in memory.

Organizing Channels Into Banks

A bank is a group of channels you can scan together. For example, you might put all police frequencies in Bank 1, all fire frequencies in Bank 2, and all EMS frequencies in Bank 3. This lets you scan only the services you want without listening to everything at once. If you programmed using the keypad, you organize channels into banks by assigning each channel a bank number as you enter it — the scanner asks for this after you enter the mode.

If you used computer software like CHIRP, you can name and organize banks before uploading. In CHIRP, click Manage Banks and type a name for each bank. Then drag channels into the banks you want them in. When you upload to the radio, the banks appear on your scanner with the names you gave them. On the scanner itself, you can turn banks on or off by pressing the Bank button and using the arrow keys to select which banks to scan.

Testing Your Frequencies and Fixing Common Problems

After programming, scroll through your channels and listen to each one. Press the arrow keys to move between channels and turn up the volume. You should hear activity on police, fire, and EMS frequencies during business hours. If you hear nothing but static, the frequency may be inactive in your area, or you may have entered it incorrectly. Go back to the channel, check the frequency number against your source, and re-enter it if needed.

If you hear nothing on a frequency that should be active, the problem is often the squelch setting. Squelch silences the scanner when there is no signal, so you do not hear constant static. If it is set too high, you will miss weak signals. Press the Squelch button (or access it through the menu) and turn it down slightly. You should start hearing activity. If you still hear nothing, check whether that frequency needs a CTCSS tone. Go back to the channel menu, add the tone code, and test again.

Another common mistake is entering the frequency with the wrong number of decimal places. Bearcat scanners expect frequencies in the format 154.2800, not 154.28. If you skip the trailing zeros, the scanner will not receive the frequency correctly. Always copy frequencies exactly as they appear in your source, including all decimal places.

Updating Your Scanner With New Frequencies

Once you have programmed your scanner, you may want to add new frequencies later. If you used the keypad, straightforward repeat the programming steps for each new channel. If you used computer software, connect the scanner to the computer again, open the software, and click read from Radio to read your existing channels. Add the new frequencies to the list, then click Upload to Radio to send everything back. The scanner keeps all your old channels and adds the new ones.

Some Bearcat models support cloning, which means copying all channels from one scanner to another using a cable. If you have two Bearcats, you can program one and then clone it to the second scanner instead of entering all the frequencies twice. Check your scanner's manual to see if cloning is supported and what cable you need.

Frequently Asked Questions

What is the difference between FM and AM mode?

FM (frequency modulation) and AM (amplitude modulation) are two ways radio signals are transmitted. Almost all local police, fire, and EMS services use FM. AM is rare in the United States for these services. Unless you know a specific frequency uses AM, always set the mode to FM.

Do I need a CTCSS tone to receive a frequency?

No. A CTCSS tone is a sub-audible code that lets you receive only transmissions with that specific code. Most public safety frequencies do not use CTCSS, so you can receive them without entering a code. If a frequency is listed with a tone code and you do not enter it, you will still hear the transmissions — you just will not filter out other traffic on the same frequency.

Can I program my scanner from my phone?

Most Uniden Bearcat models do not support phone programming. You need either the keypad on the scanner or a computer with programming software and a USB cable. Some newer Uniden models may have Bluetooth or app support — check your manual or Uniden's website for your specific model.

What happens if I enter a frequency incorrectly?

The scanner will not receive anything on that channel, or it will receive the wrong service. Go back to the channel, delete it, and re-enter the frequency carefully. Copy the number directly from your source to avoid typos, and make sure you include all decimal places.

Can I delete channels I do not want anymore?

Yes. Using the keypad, scroll to the channel you want to delete, press Menu, and look for a "Delete" or "Clear" option. Using computer software, right-click the channel in the list and select Delete, then upload to the radio again.