Programming a Uniden Scanner: The Basic Steps

Programming a Uniden police scanner means entering the radio frequencies you want to monitor into the scanner's memory. Most Uniden models let you do this directly on the device using the keypad and display screen, though some newer models also support computer software. The process takes about five to ten minutes per frequency once you know which frequencies your local police and fire departments use.

Before you start, you will need two things: the scanner itself and a list of frequencies for your area. You can find local frequencies through online databases like RadioReference.com, which organizes frequencies by state, county, and agency. Write down the frequency number and the agency name before you begin programming.

Key Takeaways

  • Most Uniden scanners use the same basic steps: press Menu, select Program, enter the frequency, name the channel, and save it.
  • You can find your local police and fire frequencies on RadioReference.com or by calling your county's non-emergency dispatch line.
  • Uniden scanners store frequencies in channels, and you can program up to several hundred channels depending on your model.
  • If your scanner will not accept a frequency, check that you entered all the digits correctly and that the frequency is within your scanner's range.

Finding Your Local Frequencies

The first step is knowing which frequencies to program. RadioReference.com is the most complete source—search for your state, then your county, and you will see frequencies listed by agency. Police departments typically have one or more frequencies; fire departments and emergency medical services have their own. Write down the main frequency for each agency you want to monitor.

If you prefer not to search online, call your county's non-emergency dispatch line and ask which frequencies the police department broadcasts on. Most dispatchers will give you the information directly. Some Uniden scanners also come with a printed frequency list for your region, though it may not be current.

Keep in mind that some frequencies are encrypted or restricted, meaning a standard scanner cannot receive them. This is common for police tactical channels and some fire department operations. The frequency list will usually note which ones are encrypted, so you will know not to bother programming them.

Programming a Single Frequency on Your Uniden Scanner

The exact steps depend on your Uniden model, but the process is similar across most handheld and desktop units. Start by pressing the Menu button on your scanner. Use the arrow keys to scroll down to Program or Add Channel, then press Enter.

The scanner will ask you to select a channel number. Choose any empty channel—if you are starting fresh, channel 1 is fine. Press Enter. Now type the frequency using the number keypad. For example, if you are programming the police frequency 460.1250, type those digits exactly as they appear. Press Enter again.

Next, the scanner will ask you to name the channel. This is optional but helpful—type something like "Police Main" or "Fire Dispatch" so you know what you are listening to. Use the arrow keys to move between letters and numbers, then press Enter when you are done. The scanner will save the frequency and return to the menu.

Repeat this process for each frequency you want to program. Most Uniden scanners hold between 100 and 500 channels depending on the model, so you can program multiple agencies without running out of space.

Using Uniden's Computer Programming Software

Some newer Uniden models, particularly the HomePatrol and SDS100 series, come with optional computer software that lets you program frequencies on your computer and upload them to the scanner via USB cable. This is faster if you are programming many frequencies at once.

To use the software, read it from Uniden's website and install it on your computer. Connect your scanner to the computer using the USB cable that came with it. Open the software and select your scanner model. The software will show a list of channels and let you type in frequencies, names, and other settings. Once you have entered all your frequencies, click Upload or Write to Scanner to send them to the device.

The software also lets you organize frequencies into groups—for example, all police frequencies in one group and all fire frequencies in another. This makes it easier to scan only the agencies you want to listen to at any given time.

Checking Your Work and Troubleshooting

After you program a frequency, turn on the scanner and scroll to that channel to make sure it is working. You should hear the agency broadcasting on that frequency, or silence if nothing is being transmitted at that moment. If you hear nothing and the frequency is active in your area, double-check that you entered the digits correctly.

If the scanner will not accept a frequency, the most common reason is a typo. Frequencies must be entered exactly—460.1250 is different from 460.1200, and the scanner will reject one or the other if you mix them up. Check the frequency list again and re-enter it digit by digit.

Another reason a frequency might not work is that it is outside your scanner's range. Most Uniden handheld scanners receive between 25 MHz and 1300 MHz, but some models have narrower ranges. Check your scanner's manual to see what frequencies it supports. If the frequency you want is outside that range, your scanner cannot receive it.

If you programmed the frequency correctly and it is within your scanner's range but you still hear nothing, the frequency may be encrypted or the agency may not be broadcasting at that moment. Try tuning to a different frequency to confirm your scanner is working, then come back to the one that is not working.

Organizing and Scanning Multiple Frequencies

Once you have programmed several frequencies, you can set your scanner to scan through them automatically. Press the Scan button and the scanner will cycle through your programmed channels, stopping when it detects activity. When the transmission ends, it resumes scanning.

Most Uniden scanners let you create scan groups so you only listen to certain frequencies at a time. For example, you might create one group for police and another for fire, then switch between them depending on what you want to monitor. Check your scanner's manual for the exact steps to create a scan group on your model.

You can also set a priority channel—the scanner will check that channel more often than others. This is useful if you want to monitor your local police main frequency but also listen to other agencies. The scanner will pause scanning to check the priority channel every few seconds.

Frequently Asked Questions

Can I program a Uniden scanner without a computer?

Yes. All Uniden scanners can be programmed using the keypad and display screen on the device itself. Computer software is optional and mainly saves time if you are programming many frequencies at once. The manual keypad method works just as well.

What if I do not know which frequencies to program?

RadioReference.com is the easiest source—search your state and county and you will see all local police, fire, and emergency frequencies listed. If you do not want to search online, call your county's non-emergency dispatch line and ask which frequency the police department uses.

Can I program encrypted police frequencies?

No. Encrypted frequencies require special equipment that standard scanners do not have. Most frequency lists note which channels are encrypted, so you will know not to program them. You can still program the unencrypted channels the same agency uses.

How many frequencies can I program into a Uniden scanner?

It depends on your model. Most handheld Uniden scanners hold between 100 and 500 channels. Check your scanner's manual or the product page on Uniden's website to see the channel capacity of your specific model.

What should I do if my scanner keeps losing the frequencies I programmed?

This usually means the scanner's battery is too low or the backup battery is dead. Charge the scanner fully and let it sit plugged in for at least an hour. If you are using a handheld model, replace the batteries with fresh ones. The scanner should retain your programmed frequencies once the battery is stable.