Programming your scanner means entering the radio frequencies your local police, fire, and emergency services use so the scanner can receive their transmissions
Most modern scanners let you enter frequencies in one of three ways: using the keypad on the scanner itself, connecting the scanner to a computer with programming software, or using a mobile app if your scanner model supports it. The method you use depends on your scanner's model and how many frequencies you want to add. Before you start, you'll need to know which frequencies your local agencies broadcast on—this information is public and available through online frequency databases, your local police department's website, or scanner enthusiast forums for your area.
The basic process is the same across most scanners: find the frequency, enter it into a channel or memory slot, label it so you know what you're listening to, and set the scanner to monitor that channel. Some scanners organize frequencies into groups called banks or zones so you can listen to just police, or just fire, or all emergency services at once. The exact steps vary by scanner brand and model, so you'll want your scanner's manual nearby—most manufacturers post them free online if you've lost the physical copy.
Key Takeaways
- You can program frequencies using the scanner's keypad, computer software, or a mobile app, depending on your scanner model.
- Public emergency frequencies are available through online databases, local government websites, and scanner forums specific to your area.
- Most scanners let you organize frequencies into groups so you can listen to just the agencies you want without scanning everything at once.
- Labeling each frequency with the agency name (like "Police Dispatch" or "Fire Main") makes it much easier to know what you're hearing.
- Your scanner's user manual has the exact button sequence for your model, and most manufacturers post manuals free on their websites.
Finding the frequencies you need for your area
The easiest way to find local frequencies is to search online databases built by scanner enthusiasts. RadioReference.com is the largest and covers most U.S. cities and counties—you can search by state, county, or city and see a list of all public safety frequencies in that area, often with notes about what each one does. Many entries also tell you whether the frequency is encrypted (meaning you won't be able to hear it on a standard scanner) or if it's used for a specific purpose like dispatch, tactical operations, or inter-agency coordination.
Your local police or fire department website may also list frequencies, though not all do. Some cities post them in the public records section or on the emergency management page. If you're having trouble finding them online, you can call your local non-emergency police line and ask—they're public information and most departments will tell you. Scanner forums and Facebook groups for your area are another good source; people who have already programmed their scanners will often share frequency lists they've compiled.
Programming frequencies using your scanner's keypad
If your scanner has a physical keypad, you'll typically press a button labeled "Program," "Menu," or "Enter" to start, then follow the on-screen prompts to enter a frequency number. The exact sequence depends on your scanner model, so check your manual for the specific button order. Most scanners ask you to choose a channel number or memory slot first (like Channel 1, Channel 2, and so on), then enter the frequency itself as a series of numbers.
After you enter the frequency, the scanner usually asks you to name it—this is where you type "Police Dispatch" or "Fire Main" so you know what you're listening to when that frequency comes up. Some scanners let you type names using the keypad like an old phone (pressing 2 three times for the letter C), while newer models have a small keyboard or touchscreen. Once you've named it, the scanner saves it to that channel and you move on to the next one. If you have dozens of frequencies to enter this way, it can take a while, which is why many people prefer computer software if their scanner supports it.
Using computer software to program multiple frequencies at once
Many scanner models work with programming software that runs on Windows or Mac computers. You connect your scanner to the computer with a USB cable, open the software, and instead of entering frequencies one at a time on the scanner itself, you type them all into a spreadsheet-like table on your screen. This is much faster if you're adding 20 or 50 frequencies at once. The software usually lets you import frequency lists from online databases or paste them from a text file, so you don't have to type each one manually.
To use this method, you need to find the correct software for your scanner model—the manufacturer's website usually has a read link, often in a support or downloads section. Popular scanner brands like Uniden, Motorola, and Whistler all offer free software for their models. Once you've entered all your frequencies and organized them into groups, you upload the data back to the scanner through the same USB cable. The software also lets you set scanning speed, turn alerts on or off for specific channels, and organize frequencies into banks so you can scan just police one minute and just fire the next.
Organizing frequencies into groups or zones
Most scanners let you organize frequencies into groups—called banks, zones, or groups depending on the brand—so you don't have to listen to every frequency at once. You might create one group for police, another for fire and EMS, and a third for public works or other agencies. When you turn on the scanner, you can tell it to scan only the police group, or only fire, or all of them together. This keeps you from hearing irrelevant traffic and makes it easier to focus on what you actually want to monitor.
Setting up groups is usually done in the same menu where you program frequencies. You'll assign each frequency to a group as you enter it, or go back and edit frequencies later to move them between groups. Some scanners let you name the groups too—"Police," "Fire," "All Agencies"—so it's clear what you're listening to. If you're using computer software, organizing into groups is usually as straightforward as putting frequencies in different columns or sections of the spreadsheet before uploading to your scanner.
What to do if your scanner won't accept a frequency
If you enter a frequency and the scanner rejects it or won't save it, the most common reason is that you've entered the number wrong. Double-check the frequency against your source—frequencies are usually listed as five digits with a decimal point, like 460.1250, and a single digit off means the scanner won't find it. Some scanners also have limits on which frequencies they can receive; older analog scanners may not work with newer digital frequencies, and some models are restricted to certain frequency ranges by design.
Another reason a frequency might not work is if it's encrypted. Many police and fire departments now use digital encryption on their main dispatch channels, which means a standard consumer scanner can't decode them—the scanner will either reject the frequency or receive only silence. RadioReference.com usually notes which frequencies are encrypted, so check there before you assume your scanner is broken. If you're still having trouble, the scanner's manual or the manufacturer's customer support can help you figure out whether the frequency is compatible with your specific model.
Backing up your programmed frequencies
Once you've spent time programming your scanner, you'll want to save that work so you don't lose it if something goes wrong. If you programmed using computer software, the software usually saves your frequency list as a file on your computer—keep a copy of that file in a safe place, like a cloud storage folder or an external drive. If you programmed directly on the scanner using the keypad, some models let you export the data to a computer or to a memory card; check your manual to see if yours does.
Backing up is especially useful if you ever need to reset your scanner, upgrade to a new model, or share your frequency list with someone else who has the same scanner. Many scanner forums have shared frequency lists that people have already programmed and exported, so you may be able to read a pre-made file for your area instead of entering everything yourself. Just make sure any file you read is from a trusted source and is meant for your specific scanner model.
Frequently Asked Questions
Can I program my scanner from my phone?
Some newer scanner models have companion mobile apps that let you program frequencies from your phone, but most traditional scanners do not. Check your scanner's manual or the manufacturer's website to see if an app is available for your model. If your scanner doesn't have an app, you'll need to use the keypad or computer software instead.
Do I need a license to listen to police frequencies?
No. Listening to public safety frequencies on a scanner is legal in the United States. You cannot transmit on those frequencies without a license, but receiving is open to anyone. Some states have minor restrictions on where you can use a scanner (like in a car during certain situations), so check your state's laws if you're concerned.
What's the difference between analog and digital frequencies?
Analog frequencies transmit voice as a continuous signal that older scanners can receive. Digital frequencies encode the signal in a different way and require a scanner with digital capability. Many agencies are switching to digital, so if you have an older analog-only scanner, you may not be able to hear newer frequencies in your area.
Why do some frequencies show up as encrypted on RadioReference?
Encrypted frequencies use a code that scrambles the transmission so only authorized radios can decode it. Standard consumer scanners cannot decrypt these signals, so you'll hear only noise or silence. Many police and fire departments encrypt their main dispatch channels for privacy and security reasons.
Can I program frequencies from a different city or state?
Yes, you can program any public frequency into your scanner, but you'll only receive transmissions when you're in range of that frequency's transmitter. If you program a police frequency from another state, you won't hear anything unless you're physically near that city. Many people program frequencies from multiple areas so they can listen when they travel.