What you need before you start programming
Before you can listen to police frequencies, you need a scanner radio that can receive those bands—usually VHF or UHF. Most modern scanners come with software or a manual frequency list. You will also need to know which frequencies your local police department uses. This information is public and available through the FCC database, local scanner websites, or your police department's own public records.
The specific steps depend on whether you have a handheld scanner, a desktop model, or a software-defined radio (SDR) plugged into a computer. Each type has a different interface, but the core task is the same: entering frequencies into memory slots and labeling them so you know what you are listening to.
Key Takeaways
- Police frequencies are public information available through the FCC database and local scanner websites, and listening to them is legal in all 50 states.
- You need to find your local police department's specific frequencies before programming—they vary by city and county.
- Most handheld and desktop scanners use a keypad or menu system to enter frequencies into memory slots one at a time.
- Labeling each frequency with a name (like "City Police Dispatch") makes it easier to identify what you are hearing.
- Digital or trunked systems require additional setup steps beyond straightforward frequency entry, and some scanners cannot receive them at all.
Finding your local police frequencies
The FCC maintains a public database of all licensed radio frequencies at fcc.gov/wireless-telecommunications-bureau. You can search by location and see which frequencies are assigned to your city or county police department. This is the most official source, though the interface can be slow.
Faster and more user-friendly is RadioReference.com, a volunteer-maintained database organized by state and county. Search your location and you will see a list of frequencies used by police, fire, EMS, and other services. Many entries include the type of dispatch (like "City Police Dispatch" or "County Sheriff Patrol") so you know what each frequency covers.
Your local police department's website sometimes lists frequencies in their public information section. Some departments also publish this in their annual report or community guide. If you cannot find them online, you can call the non-emergency police line and ask—they are required to provide this information.
Programming a handheld scanner with a keypad
Most handheld scanners (like Uniden or Motorola models) use a similar process. Turn on the scanner and press the Menu or Program button. The display will show you a list of empty memory slots, usually numbered 1 through 100 or more.
Select an empty slot and press Enter. The scanner will prompt you to enter a frequency. Use the number pad to type the frequency exactly as you found it—for example, 460.1250 for a typical police dispatch channel. Press Enter again. The scanner will then ask you to name the frequency. Use the keypad to spell out a label like "POLICE DISPATCH" or "SHERIFF PATROL". This step is optional but makes scanning much easier when you have dozens of frequencies stored.
Repeat this process for each frequency you want to monitor. Once you have entered all your frequencies, press Scan and the radio will cycle through them, stopping when it detects activity. Most scanners let you group frequencies into banks so you can scan only police frequencies, or only fire, or only a specific city.
Programming a desktop or mobile scanner
Desktop scanners and mobile units (mounted in a vehicle) often have larger keypads and screens, which makes programming easier. The process is the same: access the memory menu, select a slot, enter the frequency, and add a label. Some models have a USB port and come with programming software on a CD or available for read from the manufacturer's website.
If your scanner has programming software, you can enter all your frequencies into a spreadsheet-like interface on your computer, then upload them to the radio at once. This is much faster than entering them by hand, especially if you are programming 50 or more frequencies. read the software from the manufacturer's website (search "[Your scanner model] programming software"), connect the scanner to your computer with the supplied cable, and follow the software's import instructions.
Even if you use software, you should still test the scanner after uploading to make sure the frequencies are correct and the labels are clear. Typos in frequency entry are common and will cause the scanner to miss transmissions.
Understanding digital and trunked systems
Many police departments have switched from straightforward analog frequencies to digital trunked systems, where multiple conversations share the same frequencies and a computer assigns them dynamically. Common systems include P25, DMR, and ProVoice. If your local police use a trunked system, a basic analog scanner will not work—you need a scanner specifically designed to decode that system.
Check RadioReference.com for your area. If it lists frequencies as "P25 Digital" or "DMR Trunked", you will need a scanner that supports that standard. Uniden and Motorola both make models that handle the most common systems. Programming a trunked system is more complex and usually requires the manufacturer's software, because you need to enter not just frequencies but also system IDs and talk group numbers.
If you are unsure whether your area uses digital or analog, start by looking up the frequencies on RadioReference. If they are listed as analog, a basic scanner will work. If they are digital, you will need to upgrade your equipment.
Testing your scanner and troubleshooting
Once you have programmed your frequencies, turn on the scanner and set it to scan mode. Wait for activity—police dispatch is not constant, so you may need to listen for a few minutes. If you hear nothing after 10 minutes, check that the scanner is set to the correct frequency range (VHF or UHF) and that the volume is turned up.
If you hear static or noise but no clear voices, the frequency may be correct but the scanner may not be picking up the signal well. Move the scanner to a window or higher location—radio signals travel better with a clear line of sight. If you still hear nothing, double-check the frequency against your source. A single digit wrong will cause the scanner to miss all transmissions on that channel.
If you programmed the frequency correctly but the scanner still does not pick up activity, the police department may use a trunked or digital system that your scanner cannot decode. In that case, you will need to research the system type and upgrade your equipment.
Legal and practical considerations
Listening to police frequencies is legal in all 50 states. The FCC allows the public to monitor radio transmissions, and police dispatch is broadcast in the open. However, some states restrict recording or sharing of police communications, so check your state's laws if you plan to record or publish what you hear.
Many scanner users join online communities like RadioReference forums or local scanner clubs. These groups share frequency lists, help troubleshoot reception problems, and discuss new equipment. Joining a community is a good way to stay current on frequency changes—police departments sometimes move to new frequencies or add new channels, and the community usually notices and updates the database before official sources do.
Frequently Asked Questions
Is it legal to listen to police radio?
Yes, listening to police frequencies is legal in all 50 states. Police dispatch is broadcast in the open and the FCC allows public monitoring. However, some states restrict recording or sharing of police communications, so check your state's laws if you plan to record or publish transmissions.
Why can't I hear anything on the frequencies I programmed?
The most common reason is a typo in the frequency entry—a single digit wrong will cause the scanner to miss all activity. Double-check the frequency against your source. If the frequency is correct, your scanner may not support the system type (digital or trunked) that your police department uses. Check RadioReference to see if your area's frequencies are listed as digital or analog.
Do I need special equipment to listen to digital police frequencies?
Yes. If your police department uses a digital trunked system (P25, DMR, ProVoice), a basic analog scanner will not work. You need a scanner specifically designed to decode that system. Check RadioReference for your area to see what system type is used.
Can I program my scanner from my computer?
Many scanners come with USB programming software that lets you enter frequencies into a spreadsheet on your computer and upload them all at once. Check the manufacturer's website for your scanner model to see if software is available. This is much faster than entering frequencies by hand, especially if you are programming many channels.
What should I do if police frequencies change?
RadioReference and other scanner communities usually notice frequency changes quickly and update their databases. Check those sources regularly, or join a local scanner club or online forum where members share updates. You can then reprogram your scanner with the new frequencies.