You recharge your scanner by finding a Power Cell or Ion Power Cell and inserting it into the scanner's battery slot
Your scanner in Subnautica runs on a Power Cell, which depletes as you use the device to scan fauna, flora, and wrecks. When the battery runs low, the scanner stops working until you swap in a fresh cell. You do not craft a new scanner — you straightforward replace the power source inside it.
The scanner itself never breaks or wears out. Once you have one, you keep it for the entire game. What changes is the Power Cell inside, which you can replace as many times as you need. This is the core mechanic: the scanner is permanent, but the cells are consumable.
Key Takeaways
- Open your inventory, select the scanner, and choose the option to remove the Power Cell from inside it.
- Craft or find a new Power Cell, then insert it into the scanner's battery slot through your inventory menu.
- Ion Power Cells last longer than standard Power Cells and are worth crafting once you unlock the blueprint.
- You can carry multiple Power Cells in your inventory so you always have a charged one ready to swap in.
- Power Cells do not recharge — they only deplete, so you must replace them entirely rather than wait for them to restore charge.
How to remove a dead Power Cell from your scanner
Open your inventory and locate your scanner. Right-click it (or use your platform's equivalent interaction button) to open the scanner's menu. You will see the Power Cell listed as an item inside the scanner. Select it and choose "Remove" or the equivalent option. The dead Power Cell will move into your main inventory as a separate item.
Once removed, the scanner becomes inert and will not function until you insert a new Power Cell. You can still carry the scanner around, but it will not scan anything. The dead cell stays in your inventory taking up a slot until you decide to craft a new one or find a replacement.
Where to find or craft Power Cells
You can craft Power Cells at a Fabricator if you have the blueprint and the materials. A standard Power Cell requires Copper Ore, Lithium, and Acid Mushrooms — all common resources you can gather from caves and the ocean floor. Fabricators are found in your base, in the Aurora, and in various Safe Shallows structures.
You can also find pre-made Power Cells lying around in wrecks and on the ocean floor, though crafting them is usually faster once you have access to a Fabricator. Early in the game, looting wrecks in the Safe Shallows is the quickest way to get your first spare cells. Check the Aurora's lower decks and the wreck fragments scattered around the starting area.
How to insert a new Power Cell into your scanner
Open your inventory and select the Power Cell you want to use. Choose "Insert into scanner" or the equivalent option. The Power Cell will move from your inventory into the scanner's battery slot. Your scanner is now recharged and ready to use.
You do not need to be at a Fabricator or charging station to swap Power Cells — you can do it anywhere, anytime, as long as you have a charged cell in your inventory. This means you can swap cells mid-exploration without returning to your base, which is essential for long diving expeditions.
Ion Power Cells and when to use them
Once you unlock the Ion Power Cell blueprint (found in the Lava Castle or crafted after scanning certain blueprints), you can craft cells that last much longer than standard Power Cells. An Ion Power Cell requires Lithium, Nickel Ore, and Magnetite. They are more expensive to make but hold a charge for significantly longer, which means fewer swaps during long exploration trips.
Early game, stick with standard Power Cells because the materials are easier to find. Switch to Ion Power Cells once you have reliable access to Nickel Ore and Magnetite, usually after you venture into deeper biomes. The longer duration makes them worth the extra resource cost once you are established.
Why your scanner stops working mid-dive
If your scanner suddenly stops responding, the Power Cell inside has fully depleted. This happens without warning — there is no low-battery alert on the scanner itself. The only way to know you are running low is to check the Power Cell's remaining charge in your inventory before you dive.
Always carry at least one spare Power Cell in your inventory on any exploration trip longer than a few minutes. Swapping cells takes only a few seconds and prevents you from getting stuck with a non-functional scanner in the middle of a wreck or cave. Running out of power while scanning a wreck blueprint means you have to leave and return later.
Frequently Asked Questions
Can I recharge a Power Cell without removing it from the scanner?
No. Power Cells in Subnautica do not recharge — they only deplete. You must remove the dead cell and insert a new one. There is no charging dock or recharging mechanic for individual cells.
What happens if I lose my scanner?
You can craft a new scanner at a Fabricator using Copper Ore, Quartz, and a Table Coral Sample. The blueprint is available early in the game. You will need to gather the materials again, but the scanner itself is replaceable.
Do I need a Power Cell in my scanner at all times?
No. You can carry a scanner without a Power Cell in your inventory, but it will not function. Insert a Power Cell only when you plan to use the scanner. This lets you save Power Cells for when you actually need them.
How long does a standard Power Cell last?
A standard Power Cell lasts long enough for roughly 20 to 30 scans, depending on what you are scanning. Fauna and flora scans use less power than scanning large structures or wrecks. The exact duration varies based on your scanning habits.
Can I use an Ion Power Cell in my scanner right away?
Yes, once you craft or find an Ion Power Cell, you can insert it into your scanner the same way you would a standard Power Cell. There is no unlock or progression requirement — if you have the cell, you can use it when ready.