Recharge your scanner at a power source or fabricator
Your scanner runs on battery power and will drain as you use it to scan creatures, plants, and wrecks. To recharge it, you need to place it in a Fabricator or Modification Station inside a base or habitat module. The scanner itself does not recharge in your inventory — you must physically put it down at one of these stations.
The fastest way is to build a Fabricator in your base if you do not have one yet. Once it is built and powered, open the Fabricator menu, find your scanner in the list of items you can interact with, and select the recharge option. The recharge takes about 30 seconds to 1 minute depending on how depleted the battery is.
If you are away from your base and your scanner dies, you will need to return to a powered habitat or find a Cyclops submarine with power to recharge it. Handheld devices cannot recharge themselves in the field.
Key Takeaways
- Your scanner battery drains during normal use and must be recharged at a Fabricator or Modification Station inside a powered base.
- Place the scanner directly into the Fabricator menu and select recharge — do not try to recharge it from your inventory.
- A full recharge takes about 30 seconds to 1 minute at a powered station.
- If your scanner dies in the field, you must return to a base or Cyclops to recharge it.
- Building a Fabricator in your base is the most reliable way to keep your scanner ready for exploration.
Building a Fabricator for scanner recharging
If your base does not have a Fabricator yet, you will need to craft one. The Fabricator blueprint is found in most wrecks and can be built in a Multipurpose Room or larger habitat module. You need Titanium, Gold, and Copper to craft it — all common materials you can find on the ocean floor or harvest from rocks.
Once built, the Fabricator must be connected to your base power grid. If your base has a Power Cell or Power Source running, the Fabricator will automatically draw power from it. Check that your base has enough power capacity — a low power warning means your devices will recharge slowly or not at all.
The Modification Station works the same way and can also recharge your scanner. Some players prefer it because it takes up less space in smaller bases, though both stations function identically for recharging.
Keeping your scanner charged during long expeditions
If you plan to spend a long time away from your base, bring a spare Power Cell in your inventory. You cannot recharge your scanner directly from a Power Cell, but you can swap it into your scanner if the battery gets low — this gives you extra scanning time without returning to base.
Another option is to build a small outpost base near areas you explore frequently. A single Multipurpose Room with a Fabricator and a Power Cell gives you a recharge station without the cost of traveling all the way back to your main base. This is especially useful if you are mapping out a distant wreck or biome.
Plan your scanning routes so you return to a power source before your battery completely dies. A dead scanner cannot be used until recharged, which wastes time during exploration.
Troubleshooting scanner recharge problems
If your scanner will not recharge, check that the Fabricator or Modification Station is actually powered. Look for a green light on the device — if it is dark or red, your base power is depleted or the device is not connected to the power grid. Build or repair your power system first.
Make sure you are placing the scanner into the correct menu. Open the Fabricator, navigate to the items section, and look for your scanner in the list. If it does not appear, the scanner may already be fully charged, or you may be using the wrong station type.
If your base power keeps running out, you need more Power Cells or a larger power source. Add extra Power Cells to your base power grid or upgrade to a larger power generator. Each device in your base draws power, so more devices mean you need more power capacity.
Power sources that work with your base
Several power sources can keep your Fabricator running. A Power Cell is the most basic option and holds enough charge for moderate use. A Thermal Plant generates power from heat vents and never runs out of energy if placed near hot water. A Solar Panel generates power during the day but not at night, making it less reliable on its own.
Most players combine multiple power sources. For example, a Solar Panel during the day plus a Power Cell for backup at night works well in shallow bases. In deeper bases near thermal vents, a Thermal Plant is the best choice because it runs continuously without needing replacement.
Check your base power status in the habitat menu. If your power bar is low, your devices will recharge slowly. Upgrade your power system before you need it, not after your scanner dies.
Scanner battery drain rates
Your scanner battery drains faster when you scan multiple items in quick succession. Scanning a single creature uses a small amount of power, but scanning an entire school of fish or a large wreck section drains the battery noticeably. Heavy scanning sessions can empty a full battery in 5 to 10 minutes of continuous use.
Passive scanning — straightforward holding the scanner without actively scanning — does not drain the battery. You can carry a fully charged scanner for as long as you want without losing power, so charge it before you leave your base and only set up it when you need to scan something.
The scanner battery capacity does not increase as you progress in the game. All scanners hold the same charge, so managing your scanning habits is the best way to avoid running out of power in the field.
Frequently Asked Questions
Can I recharge my scanner while it is in my inventory?
No. You must place the scanner into a Fabricator or Modification Station to recharge it. The scanner cannot recharge while you are carrying it, even if you are standing next to a powered device.
How long does a full scanner recharge take?
A full recharge takes about 30 seconds to 1 minute at a powered Fabricator or Modification Station. The exact time depends on how much battery the scanner has lost — a nearly empty scanner takes longer than one with partial charge.
What happens if my base runs out of power while I am recharging my scanner?
The recharge will stop when ready. Your scanner will keep whatever charge it had gained up to that point, but it will not continue recharging until your base power is restored. Repair or replace your power source and restart the recharge.
Do I need a Modification Station or is a Fabricator enough?
Either one works for recharging your scanner. A Fabricator is more common and serves other purposes, so most players use that. A Modification Station takes up less space but is primarily for upgrading equipment, so choose based on your base layout.
Can I use a Power Cell to recharge my scanner directly?
No. Power Cells power your base and devices, but you cannot use one to directly recharge a handheld scanner. You must use a Fabricator or Modification Station connected to your base power grid.