Set up your scanner and place the ID correctly
To scan an ID card, you need a flatbed scanner or document feeder that can handle small items. Place your ID face-down on the glass surface of the scanner, positioned in the upper left corner or centered, depending on your scanner's design. Check your scanner's manual to see where it expects documents to sit — most flatbed scanners have alignment guides printed on the glass or a physical edge you can use as a reference.
Make sure the ID lies flat against the glass with no wrinkles, folds, or air bubbles underneath. If your scanner has a document feeder (the kind that pulls paper through automatically), do not use it for an ID card — the card is too stiff and may jam. Stick with the flatbed surface. Close the scanner lid gently so it sits evenly on top of the card without pressing so hard that you bend it.
Key Takeaways
- Place your ID face-down on the flatbed glass, aligned to the corner or center depending on your scanner model.
- Use 300 DPI resolution for a clear scan that captures text and photos without creating a huge file.
- Scan both sides of the ID separately if your scanner does not have a duplex (two-sided) mode.
- Save the file as a PDF or JPG in a folder you can find later, and name it something you will recognize.
- Clean the scanner glass before scanning to avoid dust spots on the final image.
Choose the right resolution and color settings
Open your scanner's software on your computer — this is usually called a driver or scanning process. Before you hit scan, set the resolution to 300 DPI (dots per inch). This resolution is high enough to capture text and facial features clearly without creating a file so large it becomes unwieldy. For most ID cards, 300 DPI is the standard used by banks, employers, and government offices.
Set the color mode to Color rather than black and white or grayscale. ID cards often have colored backgrounds, security features, or holograms that are important to preserve in the scan. If your scanner offers an "auto" setting for color, that works fine — the scanner will detect whether the document is color or black and white and adjust automatically.
Scan the front of the ID
With the ID positioned on the glass and your settings chosen, click the Scan button in your scanner software. The scanner will pull light across the glass and create a digital image. This usually takes 5 to 10 seconds. Do not move the ID or close the lid while the scan is happening.
Once the scan finishes, the image will appear on your screen. Look at it to make sure the entire ID is visible, the text is sharp, and there are no shadows or dust spots. If the image looks blurry or cut off, place the ID again and rescan. If it looks good, save this image with a clear filename — something like "ID_Front_2024" works well.
Scan the back of the ID if needed
Flip the ID over so the back side faces down on the glass. Line it up the same way you did the front. Click Scan again. The back of an ID often contains a magnetic stripe, barcode, or additional security information that may be needed depending on what you are using the scan for.
Some scanners have a duplex mode that scans both sides automatically in one pass — check your scanner's manual or software menu to see if this option exists. If it does, you can place the ID once and let the scanner handle both sides. Save the back image with a filename like "ID_Back_2024" so you know which side is which.
Save your scanned files in the right format
Your scanner software will ask you to choose a file format before saving. The two most common options are PDF and JPG. PDF is better if you plan to email the scan or store it in a document management system, because the format preserves quality and is harder to accidentally edit. JPG is better if you need to upload the image to a website or use it in another process.
Create a folder on your computer specifically for important documents and save your ID scans there. Use a naming system you will remember — include the date, the document type, and which side if you scanned both. For example: "Driver_License_Front_Jan2024.pdf" and "Driver_License_Back_Jan2024.pdf". This makes it much easier to find the file later when you need it.
Clean your scanner glass before and after
Dust, fingerprints, and smudges on the scanner glass will show up as spots or streaks on your scan. Before you scan, use a soft, lint-free cloth slightly dampened with water or a glass cleaner to wipe the glass surface. Let it dry completely before placing your ID on it. This takes less than a minute and prevents you from having to rescan because of visible defects.
After you finish scanning, wipe the glass again to remove any dust the ID may have left behind. This keeps your scanner in good condition for future scans and prevents buildup that can affect image quality over time.
Troubleshoot common scanning problems
If your scan comes out blurry, the resolution may be too low or the ID may have shifted during the scan. Try increasing the DPI to 400 or 600, place the ID again, and rescan. If the image is too dark or too light, your scanner software may have an exposure or brightness adjustment — look for a slider or adjustment tool before scanning again.
If part of the ID is cut off in the scan, the card was not positioned correctly on the glass. Place it again, making sure it is fully within the scanning area, and rescan. If your scanner software is not opening or responding, restart your computer and make sure the scanner is plugged in and turned on. Check that the USB cable (if you have one) is connected firmly to both the scanner and the computer.
Frequently Asked Questions
Can I scan an ID card with my phone camera instead of a scanner?
Yes, many phones have document scanning apps that work well for ID cards. Apps like Adobe Scan, Microsoft Lens, or your phone's built-in Notes app can capture a clear image. The image quality is usually good enough for most purposes, though a dedicated scanner typically produces sharper text and more accurate colors.
What resolution should I use if I need a very clear scan?
For most purposes, 300 DPI is sufficient. If you need the scan for legal documents, banking, or official records, 300 to 400 DPI is standard. Going higher than 400 DPI creates much larger files without noticeably better results for an ID card.
Is it safe to store scanned ID images on my computer?
Scanned ID images contain sensitive information, so store them in a password-protected folder or encrypted drive if possible. Do not email them unless necessary, and delete copies you no longer need. If you are storing them for a business or organization, follow their data security guidelines.
Why does my scan have a dark line or shadow across it?
This usually means the scanner lid was not closed evenly or the ID shifted during the scan. Make sure the lid sits flat and level, place the ID again, and rescan. If the shadow persists, the scanner glass may need cleaning or the scanner may need service.
Can I scan a laminated or plastic ID card?
Yes, laminated and plastic cards scan well on a flatbed scanner. The smooth surface usually produces a clear image. If you see glare or reflection, try tilting the scanner lid slightly or adjusting the lighting in the room to reduce shine on the plastic surface.