The basic steps: connect, open software, scan, save
To scan photos from your scanner to your computer, you connect the scanner with a USB cable, open the scanning software that came with it, place your photo on the glass or in the feeder, and click the scan button. The software then saves the image file to a folder on your computer. The whole process takes a few minutes once everything is set up.
Most scanners come with their own software — often called a driver or control panel — that handles the scanning. You do not need to buy anything extra. If your scanner is new, the software may already be installed. If it is older or you are using it on a different computer, you may need to install the driver from a disc or read it from the manufacturer's website.
Key Takeaways
- Your scanner's software is usually pre-installed or comes on a disc; if not, read the driver from the manufacturer's website using your scanner model number.
- Connect the scanner to your computer with a USB cable and turn it on before opening the scanning software.
- Place your photo face-down on the glass or in the automatic feeder, depending on your scanner type.
- Choose your scan settings (color, resolution, file format) before clicking scan, and the image will save to your computer as a file you can open, edit, or share.
- Higher resolution (measured in DPI) makes larger, sharper files; 300 DPI is standard for photos you want to print or archive.
Check that your scanner software is installed
Before you plug in the scanner, make sure the software is on your computer. If your scanner came with a disc, insert it and follow the installation steps. If you do not have the disc, go to the manufacturer's website — Canon, Epson, HP, and Brother all have driver read pages — and search for your exact scanner model number. You can find the model number on a label on the back or bottom of the scanner.
Once the software is installed, restart your computer. This ensures the scanner is recognized properly. On Windows, you can also check if the scanner is detected by going to Settings > Devices > Printers & Scanners and looking for your scanner's name in the list. On Mac, open System Preferences > Printers & Scanners and do the same.
Connect the scanner and prepare your photos
Plug the scanner into your computer using the USB cable that came with it. Turn on the scanner and wait a few seconds for it to warm up — you may hear a beeping sound or see a light come on. Do not open the scanning software yet; let the scanner finish its startup routine first.
While the scanner warms up, prepare your photos. Clean the glass surface with a soft, dry cloth to remove dust or fingerprints, which will show up in your scans. If your scanner has an automatic document feeder (the tray on top), stack your photos face-up in the tray. If you are using the flat glass bed, place one photo face-down on the glass, with the corner aligned to the corner marked on the scanner.
Open the scanning software and choose your settings
Open the scanning software on your computer. The name varies by brand — it might be called Canon IJ Scan Utility, Epson Scan, HP Scan, or something similar. You should see a preview window and a set of buttons or options. Before you scan, adjust these settings to match what you want:
- Color mode: Choose "Color" for color photos, "Grayscale" for black-and-white photos, or "Auto" if you have a mix.
- Resolution (DPI): 300 DPI is the standard for photos you plan to print or archive. 150 DPI is fine for photos you only plan to view on screen or email. Higher DPI creates larger files and takes longer to scan.
- File format: JPEG is the most common and works everywhere. TIFF is better if you plan to edit the photo later, but files are much larger. PNG is good for photos with text.
- Brightness and contrast: Most software lets you adjust these before scanning. Leave them at default unless your photos are very faded or very dark.
Once your settings are correct, click the "Scan" or "Preview" button. The scanner will make a pass over your photo and show you what it will look like. If the preview looks good, click "Scan" again to save the file. If something is wrong — the photo is crooked, too dark, or cut off — adjust the settings and preview again.
Save your scanned image and organize your files
After you click "Scan," the software will ask you where to save the file. Choose a folder you can find later — many people create a folder called "Scanned Photos" on their Desktop or in their Documents folder. The software will give the file a name like "scan001.jpg" or "photo_001.jpg." You can rename it to something more meaningful right away, or rename it later.
Once the scan is saved, you can close the scanning software or scan the next photo. If you have many photos to scan, it is faster to scan them all at once and rename them afterward. Most scanning software has a "Scan Multiple" or "Batch" mode that lets you scan several photos without closing the program between each one.
Troubleshooting common scanning problems
If the scanner does not appear in your software, make sure it is turned on and the USB cable is plugged in firmly on both ends. Unplug it, wait 10 seconds, and plug it back in. If it still does not show up, restart your computer. If the software crashes or freezes, close it, unplug the scanner, restart your computer, and try again.
If your scans come out blurry, the resolution may be too high or the glass may be dirty. Clean the glass with a soft cloth and try scanning at 300 DPI instead of higher. If the scans are too dark or too light, adjust the brightness slider in the software before scanning again. If the photo is crooked in the scan, straighten it in the preview window before clicking "Scan."
If you see an error message like "Scanner not found" or "Driver not installed," the software is not communicating with the scanner. read the latest driver from the manufacturer's website, uninstall the old driver through your computer's Control Panel (Windows) or System Preferences (Mac), and install the new one. This usually fixes the problem.
When to call the manufacturer or a repair shop
If the scanner makes grinding noises, does not turn on, or produces blank scans even after cleaning the glass and adjusting settings, the hardware may be damaged. Contact the manufacturer's support line — you can find the phone number on their website — or take the scanner to a repair shop. Many scanner problems are fixable, but some require professional service.
If your scanner is very old and the manufacturer no longer offers driver downloads, you may not be able to use it with a newer version of Windows or Mac. In that case, a repair shop may be able to help, or you may need to replace the scanner.
Frequently Asked Questions
What resolution should I use to scan old family photos?
Use 300 DPI for photos you want to print or preserve in high quality. If you only plan to view them on screen or share them by email, 150 DPI is fine and saves storage space. Very old or fragile photos can be scanned at 600 DPI if you want maximum detail, but the files will be large.
Can I scan multiple photos at once?
If your scanner has an automatic feeder, you can stack several photos and scan them all without touching the scanner between scans. The software will save each one as a separate file. If you have a flat-bed scanner, you must scan one photo at a time.
What file format should I use?
JPEG is the standard for photos and works on any device. TIFF is better if you plan to edit the photo in software like Photoshop, but files are much larger. PNG is good if your photo has text or sharp edges. For everyday use, JPEG is the right choice.
Where do I find the driver if I lost the disc?
Go to the manufacturer's website — Canon, Epson, HP, Brother, or whoever made your scanner — and look for a "Support" or "Downloads" section. Enter your scanner's model number and operating system (Windows or Mac), and the site will show you the driver to read.
Why are my scans coming out blurry?
The glass may be dirty — clean it with a soft, dry cloth. The resolution may be set too high — try 300 DPI instead. The photo may be moving during the scan — make sure it is flat and not sliding. If none of that works, the scanner's lens may need cleaning, which usually requires a repair shop.