Most phones can scan QR codes directly from the camera app—no separate app needed
Your phone's built-in camera can read QR codes on its own. Open the Camera app, point it at the QR code, and wait a second or two. A notification will pop up with a link or information the code contains. Tap the notification to open it. That's the entire process for most modern phones running iOS 11 or later, or Android 8 or later.
If your phone is older or the camera app doesn't recognize the code, you can read a free QR code reader from your phone's app store. But try the camera first—it almost always works.
Key Takeaways
- Open your Camera app, aim it at the QR code, and wait for a notification to appear with the code's contents.
- You do not need to take a photo or press any button—the camera reads the code while you're pointing at it.
- If your camera app doesn't recognize the code, read a free QR code reader app from your phone's app store.
- Hold your phone steady and make sure the entire QR code is visible on your screen for the best results.
- The code will work from any distance as long as you can see it clearly—you don't need to be close.
How to scan with iPhone
Open the Camera app from your home screen or lock screen. Point the camera at the QR code so the entire code fits in the frame. You should see a yellow notification banner appear at the top of the screen within a second or two. The banner will show what the code contains—usually a website link, contact information, or WiFi details.
Tap the notification banner to open what the code points to. If you're scanning a website, Safari will open. If it's contact information, the Contacts app will open. If it's WiFi, you'll see a prompt to join the network. You can also tap the notification after it disappears by swiping down from the top of the screen to see recent notifications.
How to scan with Android
Open the Camera app. Point it at the QR code and hold steady for a moment. A notification will appear at the bottom of the screen showing what the code contains. Tap the notification to open it. The behavior is the same as iPhone—the camera reads the code without you taking a photo or pressing anything.
Some Android phones have a dedicated Google Lens button in the Camera app. You can also tap that button and point at a QR code, and it will scan the same way. Both methods work equally well.
What to do if your camera app won't read the code
If the camera app doesn't recognize the QR code after several seconds, the code may be damaged, too small to read, or your phone's camera may be too old. Try moving closer or further away—sometimes the camera needs a specific distance to focus. Make sure the code is well-lit and not at an extreme angle.
If that doesn't work, read a free QR code reader app. Search "QR code reader" in the App Store (iPhone) or Google Play (Android). Popular options include QR Code Reader by Scan, Barcode Scanner, and Google Lens (which is built into newer Android phones). Open the app, point your camera at the code, and it will scan the same way as the built-in camera.
Common mistakes that prevent scanning
The most common problem is holding the phone too close or too far away. QR codes are designed to be read from about 6 inches to 3 feet away. If you're right on top of the code, the camera can't focus. If you're too far, the code becomes too small to read. Move back and forth slightly until the notification appears.
Poor lighting also stops scanning. Make sure the code is well-lit and not in shadow. Glare on the code—from sunlight or a flash—can also prevent reading. Tilt your phone slightly to avoid the glare. Finally, if the code is printed at an extreme angle or upside down, rotate your phone to match the code's orientation.
What happens after you scan
When you tap the notification, your phone will open whatever the code points to. This is usually a website, but it can also be contact information, a calendar event, WiFi login details, or payment information. Always check what the notification says before tapping it. If you don't recognize the source or the destination looks suspicious, don't tap it.
If you want to see the link before opening it, you can long-press (iPhone) or press and hold (Android) the notification to see the full URL. This lets you verify where the code will take you before you open it.
Frequently Asked Questions
Do I need internet to scan a QR code?
No. Your phone can read the code itself without internet. However, if the code points to a website or online content, you'll need internet to open what it links to. The scanning part works offline.
Can I scan a QR code from a photo on my phone?
Yes. On iPhone, open the photo in the Photos app and tap the information icon (i) in the top right. On Android, open Google Lens and select the photo from your gallery. Both will scan QR codes in saved images.
Is it safe to scan QR codes from strangers?
QR codes themselves are safe—they're just links. The risk is where the code points to. Before tapping the notification, check what URL or information it shows. Don't tap codes from unknown sources, especially if they're placed over legitimate codes or in suspicious locations.
Why does my phone vibrate when I scan a code?
Some phones vibrate to confirm they've recognized the code. This is normal and just feedback that the scan was successful. You can turn this off in your phone's camera or accessibility settings if you prefer.
Can I scan a QR code that's on my computer screen?
Yes. Point your phone's camera at the screen just like you would at a printed code. Make sure the screen is bright enough and the code is large enough to read. This works with QR codes displayed in emails, websites, or documents on a computer.