Scanning in Windows 11 uses the built-in Photos app or Scanner app
Windows 11 includes a native scanning tool called the Scanner app that works with most USB-connected flatbed and sheet-fed scanners. You can also scan directly into the Photos app if your scanner is already set up. Both methods are free and do not require third-party software. The Scanner app is the fastest route if you want to scan multiple pages or adjust settings like resolution and file format before saving.
Before you start, make sure your scanner is plugged in, turned on, and connected to your computer via USB. Windows 11 will usually detect it automatically. If Windows does not recognize your scanner, you may need to install the manufacturer's driver from their support website — check the scanner's manual or the brand's website for the model number and read link.
Key Takeaways
- The Scanner app is built into Windows 11 and works with most USB scanners without needing extra software.
- You can scan to JPG, PNG, or PDF format, and choose resolution (DPI) before scanning to control file size and quality.
- If Windows does not detect your scanner, read the driver from the manufacturer's website using your scanner's model number.
- The Photos app can also scan if your scanner is already installed, but the Scanner app gives you more control over settings.
How to open the Scanner app and check your connection
Open the Start menu and type "Scanner" in the search box. Click the Scanner app when it appears in the results. The app will open and automatically look for connected scanners. If your scanner is plugged in and turned on, it should appear in the dropdown menu at the top of the window labeled "Select scanner".
If the dropdown shows "No scanners found," your scanner is not yet recognized by Windows. Unplug the USB cable, wait 10 seconds, and plug it back in. If it still does not appear, go to the manufacturer's website, find your scanner model, and read the latest driver. Run the installer and restart your computer, then open the Scanner app again.
Once your scanner appears in the dropdown, click on it to select it. The app will show you a preview area and a row of buttons below it for scanning options.
Scanning a single page or document
Place your document or photo face-down on the scanner glass, or face-up in the automatic feeder if your scanner has one. Close the lid gently. In the Scanner app, look at the settings on the left side of the window. The default settings usually work fine — Color mode, 300 DPI resolution, and PDF format.
Click the blue Scan button. The scanner will pull the page through or scan the glass, and the image will appear in the preview area within a few seconds. Review the preview to make sure the scan is straight and clear. If you are happy with it, click Save and choose where to store the file on your computer. If the scan is blurry or crooked, click Rescan to try again.
Adjusting resolution, color mode, and file format before scanning
Before you click Scan, you can change how the scan looks and what format it saves in. On the left side of the Scanner app, you will see three dropdown menus: Color format, File type, and Resolution.
Color format has three choices: Color (full color, largest file size), Grayscale (black and white with shades of gray, medium file size), and Black and white (pure black and white only, smallest file size). Use Color for photos, Grayscale for text documents, and Black and white for old printed pages you want to compress.
File type lets you choose between PDF (best for documents, keeps multiple pages in one file) and JPG (best for photos, creates one image file per scan). Resolution is measured in DPI (dots per inch). The default is 300 DPI, which is sharp enough for most documents and photos. Use 200 DPI to save space if the scan is just for your records, or 600 DPI if you plan to print the scan later or need fine detail.
Scanning multiple pages into one PDF
If you want to scan several pages and combine them into a single PDF file, make sure File type is set to PDF. Scan the first page, review the preview, and click Scan again instead of Save. The app will add the second page to the same document. Repeat this for each page you want to include.
After you have scanned all the pages, click Save. The app will save all the pages as one PDF file. You can open it in any PDF reader to check that the pages are in the right order. If you made a mistake, you can delete the file and rescan, or use a free PDF editor like Microsoft Edge (which can open PDFs and let you delete pages) to remove pages you do not want.
Scanning directly from the Photos app
If your scanner is already installed and you prefer to use the Photos app, open Photos from the Start menu. Click the three-dot menu button in the top right and select Settings. Scroll down and look for Scan or Scanner options. Some scanner models will show a Scan button directly in the Photos app toolbar if the driver supports it.
Click Scan if it appears, place your document on the scanner, and the scan will be imported directly into your Photos library. This method is faster if you are scanning photos you want to organize, but it gives you fewer options for adjusting resolution or file format compared to the Scanner app.
Troubleshooting common scanning problems
If the scan comes out blurry, the scanner glass may be dirty. Turn off the scanner, wipe the glass gently with a soft, lint-free cloth slightly dampened with water, and let it dry completely before scanning again. If the scan is crooked, make sure the document is aligned straight against the corner guides on the scanner bed.
If the Scanner app freezes or crashes, close it completely and restart your computer. Then open the Scanner app again and try a fresh scan. If the scanner still does not work after a restart, uninstall and reinstall the driver from the manufacturer's website. Go to Settings > Apps > Apps & features, search for your scanner brand, and click Uninstall. Then read and run the driver installer again.
If the scan is too dark or too light, try adjusting the brightness in the Scanner app settings if your scanner model offers that option. Some scanners have a brightness slider in the left panel. If not, you can open the saved scan in the Photos app and use the Edit button to adjust brightness and contrast after scanning.
Frequently Asked Questions
Can I scan wirelessly from a network printer with a scanner?
Yes, if your printer is connected to your Wi-Fi network and has a scanner built in. Windows 11 will detect it as a network scanner if the driver is installed. Open the Scanner app, click the dropdown, and select your network printer from the list. The process is the same as scanning with a USB scanner.
What should I do if Windows 11 says my scanner is not compatible?
Check the manufacturer's website to see if they offer a Windows 11 driver for your scanner model. Older scanners may only have drivers for Windows 10 or earlier. If no Windows 11 driver exists, try installing the Windows 10 driver — it often works. If that fails, you may need to use third-party scanning software like VueScan or the manufacturer's own scanning program if they provide one.
Can I scan to a specific folder on my computer?
Yes. When you click Save after scanning, a file browser window opens. Navigate to the folder where you want to store the scan, type a filename, and click Save. Windows will remember this location for your next scan, so you can save to the same folder without browsing again.
What is the difference between PDF and JPG for scans?
PDF is better for documents because it keeps text searchable and can hold multiple pages in one file. JPG is better for photos because it compresses the file smaller. If you scan a document as JPG, you will get one image file per page, and the text will not be searchable.
Why is my scan file so large?
Large file size usually means you scanned at high resolution (600 DPI or more) or in Color mode. Lower the resolution to 300 DPI or switch to Grayscale if the scan is just for viewing on screen. If you need a smaller file, use JPG format instead of PDF, which compresses better.