Windows 11 has a built-in scanning tool that works with most USB and network scanners

Windows 11 comes with the Scanner app, a straightforward tool that connects to your scanner and captures documents or photos without needing extra software. If you have a scanner plugged into your computer or connected to your network, you can open the app, select your device, and scan in a few clicks. The scans save as image files (usually JPG or PDF) that you can then edit, share, or store.

Before you start, make sure your scanner is turned on and connected to your computer via USB cable or your home network. Windows 11 should recognize most modern scanners automatically, but older models may need a driver installed first — check the manufacturer's website if Windows doesn't detect your device.

Key Takeaways

  • Open the Scanner app from the Windows Start menu or search for it by name to begin scanning without installing extra software.
  • Your scanner must be powered on and connected by USB or network before Windows 11 can detect and use it.
  • You can choose your scanner from a dropdown list, adjust settings like color mode and resolution, then click Scan to capture the document.
  • Scanned files save as JPG or PDF images in your Pictures or Documents folder, depending on which format you select before scanning.
  • If Windows doesn't recognize your scanner, visit the manufacturer's support page to read and install the correct driver for Windows 11.

Opening the Scanner app and selecting your device

Press the Windows key on your keyboard, type "Scanner," and click the app when it appears in the search results. The Scanner app window will open with a blank preview area on the left and settings on the right.

Look for the dropdown menu labeled "Scanner" near the top of the window. Click it to see a list of all scanners Windows has detected on your computer or network. Select the scanner you want to use. If only one scanner is connected, it will be selected automatically.

Adjusting scan settings before you scan

Once your scanner is selected, you'll see several options on the right side of the window. The most common ones are:

  • Source: Choose whether to scan from the flatbed (for single pages or photos) or the automatic document feeder (if your scanner has one and you're scanning multiple pages).
  • Color mode: Select Color, Grayscale, or Black and White depending on what you're scanning and how you plan to use the file.
  • File type: Choose JPG or PDF. JPG works well for photos; PDF is better for documents you might want to edit or combine later.
  • Resolution (DPI): Higher numbers like 300 DPI capture more detail but create larger files. For everyday documents, 200 DPI is usually enough.

You don't need to change these settings every time — Windows remembers your choices for the next scan.

Scanning a document or photo

Place your document or photo face-down on the scanner's flatbed (or face-up in the document feeder if your scanner has one). Close the lid gently if there is one.

Click the blue Scan button in the Scanner app. The scanner will make noise as it captures the image, and a preview will appear on the left side of the window within a few seconds. If the scan looks correct, you're done — the file is automatically saved. If you need to rescan, click the Scan button again.

Finding and managing your scanned files

By default, Windows saves scans to your Pictures folder with a name like "Scan001.jpg" or "Scan001.pdf." To find them, open File Explorer, click Pictures in the left sidebar, and look for files with "Scan" in the name.

You can rename, move, or delete scans just like any other file. Right-click a scan to open it with a photo viewer, PDF reader, or document editor. If you want to change where scans are saved, open the Scanner app, click the menu button (three horizontal lines) at the top, select Settings, and choose a new folder under "Save scans to."

What to do if your scanner isn't recognized

If your scanner doesn't appear in the Scanner app's dropdown list, Windows may not have the correct driver installed. Visit the manufacturer's website (Canon, HP, Epson, Brother, etc.) and search for your scanner model. read the driver labeled for Windows 11 or Windows 10, then run the installer and restart your computer.

After the driver is installed, open the Scanner app again and check the dropdown — your scanner should now appear. If it still doesn't show up, try unplugging the USB cable, waiting 10 seconds, and plugging it back in. Some network scanners also require you to connect them to your Wi-Fi network first using their own setup app or web interface.

Scanning multiple pages into one file

If your scanner has an automatic document feeder (ADF) and you want to scan several pages into a single PDF, load all pages into the feeder, select PDF as your file type, and set the Source to "Feeder" or "Document Feeder." Click Scan once, and the scanner will pull pages through automatically and combine them into one file.

If your scanner doesn't have a feeder, you'll need to scan each page separately. Each scan creates a new file, so you may want to rename them (Page1, Page2, etc.) and then combine them later using a PDF tool like Microsoft Edge, which can merge PDFs by opening them and using the print-to-PDF feature.

Frequently Asked Questions

Can I scan directly to email or cloud storage from the Scanner app?

The Scanner app itself doesn't have built-in email or cloud upload. After scanning, you can open the file in File Explorer, right-click it, and choose to email it or upload it to OneDrive, Google Drive, or another service. Some scanner manufacturers include their own software that adds these features — check your scanner's manual or support page.

Why is my scan blurry or too dark?

Check that your document is lying flat on the scanner glass with no wrinkles or shadows. If the glass is dirty, wipe it gently with a soft, dry cloth. Try increasing the resolution (DPI) in the Scanner app settings, or switch from Black and White to Grayscale or Color mode. You can also adjust brightness and contrast after scanning using a photo editor like the built-in Photos app.

What's the difference between JPG and PDF for scanning?

JPG is a photo format that works well for single images and takes up less space. PDF is better for documents because it preserves text and layout, and you can combine multiple scans into one file. If you're scanning text you might want to search or edit later, PDF is the better choice.

Do I need to install special software to use my scanner with Windows 11?

No — the Scanner app is built in and works with most modern scanners. You only need to install a driver if Windows doesn't recognize your scanner automatically. Older scanners (more than 10 years old) may not have Windows 11 drivers available, in which case you'd need the manufacturer's software instead.

Can I scan directly from my phone or tablet to my computer?

The Scanner app only works with scanners connected to your computer. If you want to scan from a phone, use your phone's camera and a scanning app like Microsoft Lens or Adobe Scan, which turn photos into clean document images. You can then transfer the files to your computer via email or cloud storage.