The basic steps for scanning on most machines
To scan a document or photo, place it face-down on the glass or face-up in the automatic feeder, depending on your scanner model. Open the scanner software on your computer — this is usually called something like "Canon ImageRunner," "Epson Scan," or "HP Scan," and came installed when you set up the device. Click the "Scan" or "Start" button in the software, wait for the scan to finish, and save the file to your computer with a name you'll recognize later.
The whole process takes about 30 seconds per page once you've done it once. Most scanners sit on a desk or are built into a printer, and they connect to your computer through a USB cable or over your home network. If your scanner is new or you've never used it before, you may need to install the software from a CD or read it from the manufacturer's website first.
Key Takeaways
- Place your document face-down on the glass or face-up in the feeder tray, depending on whether your scanner has an automatic document feeder.
- Open the scanner software on your computer and click the Scan button — the software usually came with your scanner or is available free from the manufacturer's website.
- Choose your scan settings (color, black and white, or grayscale) and resolution (300 dpi is standard for documents, 600 dpi for photos) before you scan.
- Save the scanned file as a PDF, JPG, or PNG so you can email it, print it, or store it on your computer.
Where to place the document and which way it faces
Most desktop scanners have a flat glass surface where you lay the document. Place the page face-down on the glass, with the top edge toward the back of the scanner (the side closest to the hinge). Close the lid gently — do not press hard. The scanner will read the image through the glass from underneath.
If your scanner has an automatic document feeder (a tray that sticks up from the top), place pages face-up in the tray and the feeder will pull them through one at a time. This is faster for scanning many pages but works best with single sheets that are not folded or wrinkled. If you are scanning a book or a thick stack, use the glass instead.
Never force a page into the feeder or leave a document on the glass longer than necessary — both can scratch the glass or jam the feeder. If a page gets stuck, turn off the scanner and gently remove it by hand.
How to adjust color, resolution, and file format before scanning
Before you click Scan, look at the settings panel in your scanner software. You will see options for color mode, resolution, and file format. These choices affect how the scanned image looks and how large the file is.
For color mode, choose "Color" if you are scanning a photo or a document with color ink. Choose "Black and White" or "Grayscale" for text-only documents — this makes the file smaller and the text sharper. For resolution, use 300 dots per inch (dpi) for documents you plan to read or print. Use 600 dpi or higher if you are scanning a photo you want to enlarge or edit. Higher resolution means a larger file, so do not go above 600 dpi unless you have a specific reason.
For file format, choose PDF if you want a single file that looks the same on any computer. Choose JPG if you are scanning photos and plan to email them or post them online. Choose PNG if you need a format that keeps sharp edges on text. Most scanners default to PDF, which works for almost everything.
Common mistakes that make scans look bad
The most common mistake is placing the document upside-down or sideways on the glass. Check the orientation mark or arrow on your scanner — it usually shows which way is up. If your scan comes out sideways, you can rotate it in the scanner software before saving, or rotate it later in any photo viewer or PDF reader.
Another mistake is scanning at too low a resolution. If your text looks blurry or pixelated after scanning, the resolution was too low. Rescan at 300 dpi or higher. If the file is too large after scanning, lower the resolution or switch to black and white instead of color.
Dirty glass is also common. If your scans have streaks or spots, wipe the glass with a soft, dry cloth before scanning again. Do not use water or cleaning spray — these can damage the scanner. If spots keep appearing, the glass may have dust underneath, and you should contact the manufacturer.
Wrinkled or folded pages can cause shadows or blurry areas in the scan. Flatten the page as much as you can before placing it on the glass, but do not crease it further. If the page is very wrinkled, place a clean sheet of glass or plastic over it to hold it flat.
How to save and name your scanned files
After the scan finishes, the software will ask you where to save the file and what to name it. Choose a location you will remember — your Documents folder or Desktop is usually easiest. Give the file a name that describes what it is, like "Tax Return 2024" or "Lease Agreement" instead of "Scan001."
If you are scanning multiple pages into one file, the software will ask whether you want to add more pages. Click "Yes" or "Add Page" and place the next page on the glass. Repeat until all pages are scanned. When you are done, click "Finish" or "Save" and the software will combine all the pages into a single PDF.
Once the file is saved, you can move it, email it, print it, or upload it anywhere you need it. Most computers can open PDF files without any extra software. If you need to edit the file later, you can open it in a photo editor or PDF editor.
Scanning photos versus documents
Photos and documents need different settings because they have different details. For a document, use black and white or grayscale mode at 300 dpi. This keeps the file small and makes the text straightforward to read. For a photo, use color mode at 300 to 600 dpi so the colors and details stay sharp. If you plan to print the photo large, use 600 dpi.
When scanning a photo, place it face-down on the glass just like a document. If the photo is old or valuable, place a clean sheet of glass or plastic over it to protect it from the scanner lid. Never force a photo into an automatic feeder — always use the flat glass for photos.
After scanning a photo, you can crop it, adjust the brightness, or fix colors using free software like Windows Photos or Preview on Mac. Most scanner software also has basic editing tools built in.
What to do if the scanner is not working
If the scanner is plugged in but the software does not recognize it, restart your computer first. Then check that the USB cable is firmly connected on both ends. If you are using a network scanner, make sure your computer is on the same Wi-Fi network as the scanner.
If the software still does not open, reinstall it. Go to the manufacturer's website (Canon, Epson, HP, Brother, etc.), find your scanner model, and read the latest software. Follow the installation steps and restart your computer when prompted.
If the scanner makes noise but nothing happens when you click Scan, the glass may be dirty or the document may not be placed correctly. Clean the glass, reposition the document, and try again. If the feeder is jamming, remove any stuck paper and check that the tray is clean and aligned properly.
Frequently Asked Questions
Can I scan both sides of a page at once?
Most standard scanners scan one side at a time. You will need to flip the page over and scan again to get both sides. Some high-end scanners have a duplex feeder that scans both sides automatically, but these are less common in home offices. Check your scanner manual to see if yours has this feature.
What resolution should I use for scanning old photos?
Use 600 dpi for old photos so you capture all the detail and texture. If the photo is very small or you only need it for email, 300 dpi is fine. You can always rescan at a higher resolution later if you need a better quality version.
Why is my scan coming out sideways or upside-down?
You placed the document in the wrong direction on the glass. Check the orientation arrow or mark on your scanner and rotate the page so the top edge points that way. If the scan is already saved sideways, you can rotate it in the scanner software or in any photo viewer before saving again.
Can I scan directly to email or cloud storage?
Some scanner software has a button to send scans directly to email or cloud services like Google Drive or OneDrive. Check your scanner software settings to see if this option is available. If not, you can scan to your computer and then attach or upload the file manually.
How do I scan a large document like a poster or blueprint?
Most desktop scanners only fit letter-size or legal-size pages. For larger documents, you will need a wide-format scanner, which is expensive and usually found in offices or print shops. Alternatively, you can photograph the document with your phone camera and crop it in a photo editor.