The basic steps to scan anything
Scanning turns a physical document or photo into a digital file your computer can store, edit, and share. The process is the same whether you are scanning a letter, a receipt, a photograph, or a multi-page contract: place the item in the scanner, open the scanning software on your computer, choose your settings, and press scan.
Most scanners connect to your computer through a USB cable or over your home network. When you plug in a new scanner, your computer usually installs the driver software automatically. If it does not, you can read the driver from the scanner manufacturer's website — look for your exact model number on the box or the back of the device.
The scanning software comes with your scanner. Common names include Canon CanoScan, Epson Scan, HP Scan, and Brother ControlCenter. You can also use free software like Windows Fax and Scan (built into Windows) or Preview (built into Mac), though the manufacturer's software usually offers more control over image quality.
Key Takeaways
- Place your document face-down on the glass or face-up in the automatic feeder, depending on your scanner type.
- Open your scanner's software, choose your file format (PDF for documents, JPG for photos), and set the resolution to 300 DPI for documents and 600 DPI for photos you want to print later.
- Preview the scan before saving to catch crooked pages or shadows, then save the file with a name that tells you what it is.
- For multi-page documents, use the automatic document feeder if your scanner has one, or scan each page separately and combine them into a single PDF afterward.
Preparing your item for scanning
Clean the glass surface of your scanner with a soft, dry cloth before you start. Dust and fingerprints show up in every scan and make text harder to read if you plan to use optical character recognition (OCR) later.
Check that your document lies flat and straight on the glass. If you are scanning a page from a bound book, open it as wide as it will go without forcing the spine. For photographs, place them face-down on the glass unless your scanner has a special photo tray on top.
If your scanner has an automatic document feeder (the tray on top where you stack pages), use it for multi-page documents. Load the stack face-up, adjust the width guides so they touch the edges of the paper without bending it, and the feeder will pull each page through one at a time. Flatbed scanning (placing items directly on the glass) works better for thick items, photographs, or anything that might jam.
Choosing the right file format and resolution
The file format determines what you can do with your scan later. PDF is the standard for documents because it preserves the layout, works on any device, and can be password-protected. JPG is smaller and works well for photos or images you plan to email or post online. TIFF is a high-quality format used by photographers and archivists but creates very large files.
Resolution, measured in DPI (dots per inch), controls how sharp your scan looks. For documents you will only read on screen, 200 DPI is enough. For documents you might print later or want to use OCR on, scan at 300 DPI — this is the standard for office documents. For photographs you plan to print, use 600 DPI. Anything higher than 600 DPI makes the file much larger without noticeably better results for most home use.
Color mode matters too. Scan in color if your document has color you need to keep. For black-and-white documents like letters or contracts, scanning in black and white or grayscale makes the file smaller and often makes text clearer. Your scanner software will let you choose before you scan.
Scanning single pages and documents
Open your scanner software and place your document face-down on the glass. Most software shows a preview window — click the Preview button to see what the scan will look like before you commit. This catches problems like the page being crooked, part of it hanging off the glass, or a shadow from the lid.
Adjust the preview if needed: rotate the image, crop out blank space, or reposition the document on the glass. Once the preview looks right, click Scan or Save. Your software will ask where to save the file and what to name it. Use a name that tells you what the document is — "Electric Bill January 2024" instead of "Scan001".
If your scanner has an automatic document feeder and you are scanning a single page, you can place it in the feeder instead of on the glass. This is faster if you are scanning many single pages in a row, like receipts or old photographs.
Scanning multi-page documents
For a document with more than one page, you have two choices: use the automatic document feeder if your scanner has one, or scan each page separately and combine them afterward.
If you use the feeder, load all pages face-up in the correct order, adjust the width guides, and open your scanner software. Look for an option called "Continuous Scan" or "Scan All Pages" — this tells the scanner to keep scanning each page as the feeder pulls it through. The software will save all pages as a single PDF file automatically.
If you are scanning on the flatbed (the glass), scan the first page, save it, then place the second page on the glass and scan again. Save each page with a number in the name — "Contract Page 1", "Contract Page 2" — so you can put them in order later. After you have scanned all pages, use free software like ILovePDF or PDFtk to combine them into one file.
Fixing common scanning problems
If your scans come out too dark or too light, look for a Brightness or Exposure slider in your scanner software. Adjust it in the preview, scan again, and check the result. If text is blurry, make sure the glass is clean and the document is lying flat. Blurriness usually means the document moved during the scan or the resolution was too low.
If pages come out crooked, check that you placed the document straight on the glass and that the width guides in the automatic feeder are not too tight. If the scanner skips pages when using the feeder, the pages may be stuck together — fan the stack before loading it.
If your computer does not recognize the scanner, unplug it, wait 10 seconds, and plug it back in. If that does not work, restart your computer. If the scanner still does not appear, read the latest driver from the manufacturer's website and install it manually.
Organizing and storing your scans
Create a folder system on your computer to keep scans organized. A straightforward structure might be: Documents > Year > Category (like "Medical", "Tax", "Bills"). This makes it much faster to find a scan later than searching through hundreds of files named "Scan001" through "Scan500".
Save important documents in at least two places — your computer and an external hard drive, or your computer and a cloud service like Google Drive or OneDrive. This protects you if your computer fails or gets damaged. For very important documents like tax returns or property deeds, consider scanning them at 300 DPI and saving as PDF, which preserves the original layout and is readable decades from now.
If you scanned a document that contains text you need to search or edit later, use OCR (optical character recognition) software. This converts the image of the text into actual text your computer can read. Many scanner software packages include OCR, or you can use free tools like Google Drive (upload the PDF and it will OCR it automatically) or Tesseract.
Frequently Asked Questions
What resolution should I use for scanning old family photos?
Scan at 600 DPI if you want to print them later or make enlargements. If you are only storing them digitally and will only view them on screen, 300 DPI is enough. Save as JPG or TIFF. TIFF preserves more detail but creates much larger files.
Can I scan both sides of a document at once?
No — you must scan one side, then flip the document and scan the other side. Some automatic document feeders have a duplex mode that does this automatically, but most home scanners require you to scan each side separately. Combine the pages into one PDF afterward.
Why is my scanner software not opening?
Make sure the scanner is plugged in and turned on, and that the USB cable is connected to your computer. Restart the scanner software. If it still will not open, restart your computer. If the problem continues, uninstall and reinstall the scanner driver from the manufacturer's website.
What file format should I use to email a scanned document?
PDF is best — it preserves the layout, works on any device, and is smaller than TIFF. If the file is still too large to email, use your scanner software to reduce the resolution to 200 DPI or use a free tool like ILovePDF to compress it before sending.
How do I scan a document that is larger than my scanner's glass?
Scan the top half, then scan the bottom half, making sure the two sections overlap slightly. Use free software like ILovePDF or Photoshop to stitch them together, or straightforward save them as separate pages in a PDF.