The Basic Steps to Scan a Document

A copier scanner works by converting a paper document into a digital image file that you can save to your computer or email. Most copiers have a flatbed glass surface where you place your document, and a touchscreen panel where you select scanning options. The process takes about 30 seconds to two minutes from start to finish, depending on how many pages you're scanning and where you want the file to go.

Start by lifting the copier's lid or top cover. Place your document face-down on the glass surface, with the corner you want to scan first positioned toward the top-left. Close the lid gently—do not slam it, as this can damage the glass. Walk to the copier's control panel and look for a button or icon labeled "Scan," "Scanner," or sometimes a folder icon. Press it to open the scanning menu.

The touchscreen will show you options for where to send your scanned file. Most copiers let you save to a USB drive, email the file to yourself, or send it to a shared network folder. Choose your destination, then press "Start" or the green button. The scanner will make a clicking sound and a light will pass under the glass. When the light stops, your scan is complete.

Key Takeaways

  • Place your document face-down on the glass with the top-left corner positioned first, then close the lid before touching the control panel.
  • Press the "Scan" button on the copier's touchscreen to open the menu, then select where you want the file saved—USB, email, or network folder.
  • Adjust resolution and color settings before scanning if your document is faint, contains color photos, or needs to be very clear.
  • For multi-page documents, use the automatic feeder tray at the top of the copier instead of the flatbed glass to save time.
  • If your scan looks dark, blurry, or cut off, check that the glass is clean and the document is positioned correctly before trying again.

Scanning Multiple Pages at Once

If you have more than one or two pages to scan, use the automatic document feeder (ADF) instead of the flatbed glass. The ADF is the tray at the top of the copier where you stack your pages. This method scans all pages into one file without you having to place each page individually on the glass.

Stack your pages face-up in the ADF tray, with the first page on top. Make sure the stack is straight and not bent or wrinkled—crooked pages can jam or scan at an angle. Tap the stack gently on a flat surface to align all edges. Load the stack into the tray and adjust the side guides so they hold the pages snugly without crushing them.

Open the scanning menu and select the ADF option (sometimes labeled "Automatic Feeder" or "Document Feeder"). The copier will ask how many pages you are scanning—enter the number, or select "Continuous" if you want it to keep scanning until the tray is empty. Press "Start." The copier will pull each page through automatically. Do not touch the pages while they are feeding, and do not open the lid.

Choosing the Right Settings for Your Document

The copier's control panel lets you change how the scan looks. The most important settings are resolution, color mode, and brightness. Resolution is measured in dots per inch (DPI). A setting of 200 DPI is fine for documents you plan to read on screen or email. Use 300 DPI if you need to print the scanned file later or if the original is small text. Use 600 DPI only for photos or artwork—higher resolution makes the file much larger and slower to email.

Color mode has three main choices: black and white, grayscale, and color. Use black and white for text-only documents—it creates the smallest file. Use grayscale for documents with shading or faint text. Use color only if your document has color photos or colored text that matters. Color files are three to five times larger than black and white.

Brightness controls how dark or light the scan appears. If your original document is faint or has a yellow tint, increase the brightness. If it is very dark or has a dark background, decrease the brightness. Most copiers show a preview of your scan on the touchscreen before you confirm—check this preview to see if the brightness looks right before scanning the whole stack.

Saving Your Scan to a USB Drive

Saving to a USB drive is the fastest way to get your scanned file off the copier. Insert your USB drive into the port on the copier's control panel—this port is usually on the front or side of the machine, sometimes behind a small door. The copier will recognize the drive within a few seconds.

Open the scanning menu and select "USB" or "Save to USB" as your destination. The copier will show you a list of folders on the drive. You can save to the main folder or create a new folder by pressing "New Folder" and typing a name. Once you have chosen where to save, press "Start" to scan. When the scan is complete, the copier will show a message like "File saved" or "Scan complete." Remove your USB drive and take it to your computer.

On your computer, open the USB drive and look for a folder named "Scans" or the folder name you created. Your scanned file will be there as a PDF or TIFF file. If you do not see it, check the main folder of the drive. Do not remove the USB drive while the copier is still scanning—wait for the "complete" message first.

Emailing Your Scan Directly from the Copier

Many copiers can email your scan directly without you having to use a computer first. This works only if the copier is connected to your office network and has email set up. Open the scanning menu and look for "Email" or "Send to Email" as a destination option. If you do not see this option, your copier may not have email capability, or it may not be set up yet—ask your office manager or IT support.

If the option is available, select it and the copier will ask for an email address. You can type the address using the touchscreen keypad, or the copier may have a contact list you can choose from. Enter the email address and press "OK." Some copiers let you add a subject line or message—fill these in if you want. Press "Start" to scan and send. The copier will show a message when the email has been sent.

Keep in mind that emailed scans may take a few minutes to arrive, especially if the file is large. If the email does not show up after 10 minutes, check your spam folder. If it is not there, the copier's email may not be working—try saving to USB instead, or ask your IT support to check the copier's network connection.

Troubleshooting Common Scanning Problems

If your scan looks too dark, too light, blurry, or cut off, the problem is usually one of three things: the glass is dirty, the document is not positioned correctly, or you chose the wrong settings. Start by cleaning the glass with a soft, dry cloth. Dust and fingerprints make scans look blurry or dark. Wipe the glass gently in circular motions and let it dry completely before scanning again.

Next, check that your document is placed face-down with the corner you want first in the top-left position. If the scan is cut off on one side, the document may have been placed too far to the right or bottom. Reposition it and try again. If you are using the automatic feeder, make sure the pages are straight and not bent—bent pages can scan at an angle or jam.

If the scan is still too dark or too light after cleaning and repositioning, adjust the brightness setting before scanning again. If the scan is blurry, try increasing the resolution to 300 DPI. If the file is too large to email, lower the resolution to 200 DPI or change the color mode from color to grayscale. If the copier shows an error message like "Paper jam" or "Feeder error," open the access panels on the copier and remove any torn pieces of paper inside, then try again.

Frequently Asked Questions

What file format does the copier save scans in?

Most copiers save scans as PDF files, which open on any computer and look the same on screen as they do when printed. Some copiers also offer TIFF format, which is better for archiving documents long-term. Ask your copier's manual or your office manager which format your machine uses by default.

Can I scan both sides of a document at once?

If your copier has a two-sided automatic feeder, yes—it will scan both sides of each page into a single file. If your copier only has a one-sided feeder, you will need to scan one side, then flip the stack and scan the other side, then combine the files on your computer. Check your copier's manual to see if it has two-sided capability.

Why is my scan coming out at an angle?

This usually means the document was not placed straight on the glass or the pages in the feeder were not aligned. Make sure the document's edges are parallel to the edges of the glass, and tap the stack in the feeder tray to straighten it. If you are using the flatbed, place the document's corner exactly in the top-left corner of the glass.

How do I know if my scan was successful?

The copier will show a message on the touchscreen when the scan is complete—usually "Scan complete," "File saved," or "Email sent." If you saved to USB, you can check the drive on your computer to confirm the file is there. If you emailed the scan, check your inbox and spam folder within a few minutes.

What should I do if the copier says "Glass error" or "Feeder error"?

These messages mean the copier detected a problem with the glass or feeder. Clean the glass with a soft cloth and make sure no paper is stuck inside the feeder tray. Open any access panels on the copier and remove torn pieces of paper. Close all panels and try scanning again. If the error continues, the copier may need service—ask your office manager or the copier's support number.