What an Exergen Temporal Scanner Does and How It Works
An Exergen temporal scanner is a non-contact infrared thermometer that reads body temperature by scanning the forehead. Instead of placing a probe in the mouth or ear, you hold the scanner about half an inch away from the skin and press a button. The device measures infrared heat radiating from the temporal artery—a blood vessel that runs across the forehead—and converts that reading into a temperature display in seconds.
The scanner works because the temporal artery is close to the skin surface and reflects core body temperature accurately. Because you never touch the person being measured, the device is faster and more hygienic than traditional thermometers, especially useful when screening multiple people or taking a child's temperature without waking them.
Key Takeaways
- Hold the scanner about half an inch from the center of the forehead and press the button to get a reading in one to two seconds.
- Wipe the scanner lens with a clean, dry cloth before each use to remove dust or moisture that can block the infrared sensor.
- Wait at least 15 minutes after the person has been in direct sunlight, worn a hat, or sweated heavily, because these conditions can raise skin temperature and give a false high reading.
- The scanner displays temperature on a small screen, usually in Fahrenheit or Celsius depending on the model setting.
- If a reading seems wrong—much higher or lower than expected—take the person's temperature again after waiting a few minutes and ensuring the forehead is dry.
Preparing the Scanner and the Person
Before taking a temperature, check that the scanner has fresh batteries or is fully charged, depending on the model. Most Exergen scanners use two or four AA batteries; if the display is dim or does not light up, replace them. Some newer models are rechargeable via USB.
Inspect the lens at the tip of the scanner—the small dark window that points at the forehead. If you see dust, fingerprints, or dried liquid on it, wipe it gently with a clean, dry, lint-free cloth. A dirty lens blocks infrared signals and causes inaccurate readings. Do not use water or cleaning solution unless the manual specifically says it is safe.
Have the person sit or stand still with their forehead exposed and visible. If they have been in direct sunlight, wearing a hat, or exercising heavily, wait 15 minutes before scanning. Sweat and heat from the environment can raise skin temperature and throw off the reading. The forehead should be dry to the touch.
Taking the Temperature Step by Step
Position the scanner so the lens points straight at the center of the forehead, about half an inch away from the skin. Do not touch the forehead with the scanner; the gap is important for accurate infrared measurement. Some models have a small guide light or laser dot to help you aim, though not all do.
Press and hold the button on the scanner. Most models require you to hold it for about one second; some beep or flash when the reading is complete. The temperature will appear on the small LCD screen on the back or side of the device. Release the button and read the number. The entire process takes one to two seconds.
If you need to take another reading, wait a few seconds before scanning again. Taking two readings in a row from the same person usually gives nearly identical results, so one scan is normally enough. If the reading seems unusually high or low, take the person's temperature again after a short wait to confirm.
Understanding the Display and Temperature Range
The scanner screen shows a number followed by either an F (Fahrenheit) or C (Celsius) symbol. Normal body temperature ranges from about 97°F to 99°F (36.1°C to 37.2°C) when measured on the forehead. Temporal readings are often slightly higher than oral readings, so a forehead temperature of 99.5°F may be normal for that person.
Most Exergen scanners have a color-coded display or indicator light. A green light or normal-range number means the temperature is within the typical range. A red light or high-range number indicates a fever. Check your specific model's manual to see what temperature thresholds trigger the color change, because they vary by manufacturer.
If the display shows an error message—often "Err" or a flashing symbol—the lens is likely dirty, the batteries are low, or the scanner is not positioned correctly. Clean the lens, replace the batteries if needed, and try again.
Common Mistakes That Give Wrong Readings
The most frequent error is scanning too far from the forehead or at an angle instead of straight on. If the lens is more than an inch away or pointed at the cheek instead of the center of the forehead, the infrared signal weakens and the reading drops. Keep the scanner perpendicular to the forehead and within the half-inch range.
Another common mistake is scanning when ready after the person has been in the sun, wearing a hat, or exercising. Their skin temperature is elevated from external heat, not from fever. Always wait 15 minutes after these activities before taking a temperature. Similarly, if the person has just come in from the cold, their forehead may be cooler than their core temperature, so wait a few minutes indoors first.
Scanning a wet or sweaty forehead also causes errors. Moisture on the skin reflects infrared differently than dry skin, usually giving a lower reading. Have the person dry their forehead with a clean cloth before you scan. Do not wipe the forehead so hard that you irritate the skin or cause it to flush red, which would raise the temperature artificially.
Cleaning and Storing Your Scanner
After each use, wipe the lens with a dry cloth to remove dust and fingerprints. If the lens has dried liquid or stubborn residue on it, dampen the cloth slightly with distilled water—not tap water, which can leave mineral deposits—and wipe gently. Let the lens air-dry completely before using the scanner again.
Store the scanner in a cool, dry place away from direct sunlight and extreme heat. Do not leave it in a hot car or near a heater, because high temperatures can damage the internal electronics. If the scanner uses replaceable batteries, remove them if you will not be using the device for more than a month, to prevent battery corrosion inside the battery compartment.
Check the lens and button periodically for cracks or damage. If the scanner has been dropped or the lens is cracked, the device may not read accurately and should not be used until repaired or replaced.
Frequently Asked Questions
Why does the scanner give a different reading than an oral thermometer?
Temporal readings are typically 0.5°F to 1°F higher than oral readings because the forehead is warmer than the inside of the mouth. This is normal and expected. If you are tracking someone's temperature over time, use the same method each time so the readings are consistent.
Can I use the scanner on a baby or sleeping child?
Yes, the scanner is ideal for babies and sleeping children because you do not need to wake them or put anything in their mouth. Make sure the forehead is dry and exposed, and hold the scanner steady about half an inch away. Babies' foreheads are smaller, so aim carefully at the center.
What should I do if the scanner keeps showing "Err"?
First, clean the lens thoroughly with a dry cloth and try again. If the error persists, replace the batteries with fresh ones. If you still see an error message, the scanner may need repair or replacement. Do not use it to take temperatures until the problem is fixed.
Does the scanner work through a hat or headband?
No, you must scan bare skin on the forehead. Hats, headbands, and hair block infrared signals. Remove any covering and wait a few minutes for the forehead to return to normal temperature before scanning.
How often should I replace the batteries?
Battery life depends on how often you use the scanner and the model. Most scanners using AA batteries last several months to a year with regular use. If the display becomes dim or the scanner does not turn on, replace the batteries. Check your manual for the specific battery type and quantity your model requires.