Getting Your Brother Scanner Ready to Use
A Brother scanner connects to your computer and turns paper documents into digital files. Most Brother models work the same way: you plug in the scanner, install software on your computer, place a document on the glass or in the automatic feeder, and press a button to scan. The scanner then saves the image as a file you can open, email, or store.
Before you scan anything, you need to unpack the scanner, connect it to power and your computer, and install the driver software that lets your computer recognize it. This takes about 15 minutes the first time. After that, scanning a document takes less than a minute.
Key Takeaways
- Brother scanners connect via USB cable to your computer and require driver software installed before they will work.
- You can find the correct driver on the Brother support website by entering your exact scanner model number.
- Most Brother scanners come with CapturePerfect or ScanSoft software that controls scanning settings and file format.
- Flatbed scanners work best for single pages and bound documents; automatic feeders are faster for stacks of loose pages.
- Scanned files are usually saved as PDF or JPG, and you can change the resolution and color settings before each scan.
Finding and Installing the Driver Software
Your Brother scanner will not work until your computer has the driver — the software that translates between the scanner and your operating system. Brother provides this free on their website. Go to support.brother.com, select your country, and search for your scanner model number (it is printed on the back or bottom of the scanner).
read the driver file for your operating system — Windows or Mac — and run the installer. Follow the on-screen prompts and restart your computer when prompted. Do not skip the restart; the driver will not load properly without it. Once the computer restarts, your scanner is ready to use.
If you cannot find your model number, check the original box or the manual that came with the scanner. If you have lost the manual, you can read it from the same Brother support page by searching for your model and selecting "Manuals" instead of "Drivers".
Connecting the Scanner to Your Computer
Use the USB cable that came with your scanner to connect it to an available USB port on your computer. Plug the power adapter into the back of the scanner and into a wall outlet. Wait about 30 seconds for the scanner to power on and initialize — you will see a light on the front panel.
Do not unplug the scanner while it is initializing or scanning. If the scanner does not power on, check that the power outlet works by plugging in another device, and make sure the power adapter is fully inserted into both the scanner and the wall. If the scanner powers on but your computer does not recognize it, unplug the USB cable, restart your computer, and plug it back in after the restart is complete.
Placing Documents in the Scanner
Brother scanners have two ways to hold documents: a flatbed (a glass surface where you place one page at a time) and an automatic document feeder (a tray that holds a stack of pages and feeds them through one by one). Not all Brother models have both — check your manual to see which your scanner has.
For the flatbed, lift the lid, place the document face-down on the glass with the top edge toward the back, and close the lid gently. For the automatic feeder, fan the stack of pages to separate them, tap the stack on a flat surface to align the edges, and place them face-up in the tray with the top edge going in first. Do not load more than 20 to 30 pages at once, or the feeder may jam.
If a page jams in the automatic feeder, open the access door on the front or back of the scanner (your manual shows where), gently pull out the stuck page, and close the door. Never force a jammed page or reach inside the scanner while it is powered on.
Scanning a Document Using the Control Panel
The simplest way to scan is to use the buttons on the scanner itself. Place your document in the scanner, then press the button labeled Scan, Copy, or a symbol that looks like a document with an arrow. The scanner will beep when it starts and beep again when it finishes. The scanned file is saved to a folder on your computer — usually "My Documents" or "Scans" — with a name like "scan0001.pdf".
If nothing happens when you press the button, the driver may not be installed correctly. Restart your computer and try again. If the scanner still does not respond, uninstall the driver, read it again from the Brother website, and reinstall it.
Scanning from Your Computer Using Scanner Software
Brother scanners come with software that gives you more control over how documents are scanned. The most common is CapturePerfect or ScanSoft — the exact name depends on your model. Open this software on your computer, place a document in the scanner, and click the "Scan" button in the software window.
Before you scan, you can change settings in the software: Resolution (measured in DPI, or dots per inch — higher numbers make larger files but sharper images; 300 DPI is standard for documents), Color Mode (color, grayscale, or black and white), and File Format (PDF, JPG, or TIFF). You can also choose where the scanned file is saved and what it is named.
After you click "Scan", the scanner will process the document and the software will show you a preview of the scanned image. You can accept it, rescan it, or adjust the settings and try again. Once you accept it, the file is saved to your computer.
Choosing Resolution and File Format for Different Tasks
The resolution you choose affects file size and image quality. For documents you only need to read on screen, 150 to 200 DPI is enough and creates smaller files. For documents you might print or need to read clearly, use 300 DPI. For archiving important papers long-term, 300 DPI or higher is better. Do not use more than 600 DPI unless you are scanning photos or artwork; higher resolution makes files very large without improving readability for text.
PDF format is best for most documents because it preserves the layout and works on any computer. JPG format creates smaller files and is good for photos, but text can look blurry. TIFF format is used mainly by professional archivists and creates very large files. Start with PDF unless you have a specific reason to use something else.
Troubleshooting Common Scanning Problems
If the scanned image is too dark or too light, the resolution was too low, or the document moved while scanning, try again with adjusted settings. In the scanner software, look for a Brightness or Contrast slider and adjust it before rescanning. If the automatic feeder keeps jamming, remove the stack, fan the pages again, and load fewer pages at once.
If the scanner is not recognized by your computer at all, the driver may not have installed correctly. Unplug the USB cable, go to your computer's Control Panel or Settings, find "Devices" or "Printers and Scanners", and look for the Brother scanner in the list. If it appears with a yellow warning symbol, right-click it and select "Uninstall Device". Then reinstall the driver from the Brother website.
If you see an error message like "Scanner not found" or "Device not responding", try unplugging the power adapter for 10 seconds, plugging it back in, and waiting for the scanner to restart. If that does not work, unplug the USB cable, restart your computer, and plug the USB cable back in after the restart is complete.
Frequently Asked Questions
Can I scan directly to email or cloud storage like Google Drive?
Some Brother scanner models have a button that scans directly to email or cloud storage if you set it up in the software first. Check your manual or the CapturePerfect software settings to see if your model supports this. If not, you can scan to your computer and then upload the file manually to cloud storage or attach it to an email.
What should I do if the scanner keeps saying "cover open" when the cover is closed?
The cover sensor may be dirty or misaligned. Lift the lid, look for a small plastic lever or switch on the inside edge, and make sure it moves freely. Gently clean it with a dry cloth. If it still does not work, the sensor may need replacement — contact Brother support or a repair service.
Why is my scanned document coming out crooked or off-center?
The document may not be aligned properly on the glass or in the feeder. For the flatbed, place the document with its top edge parallel to the back edge of the glass. For the automatic feeder, make sure the pages are tapped straight and the side guides are snug against the stack. Rescan after adjusting the alignment.
Can I scan both sides of a page automatically?
Some Brother models have automatic duplex scanning, which scans both sides in one pass. Check your manual or the scanner software to see if your model supports it. If it does, the setting is usually in the software under "Scanning Options" or "Advanced Settings". If your scanner does not have this feature, you will need to scan one side, flip the pages, and scan the other side separately.
How do I clean the scanner glass so scans are not blurry?
Lift the lid and gently wipe the glass surface with a soft, lint-free cloth slightly dampened with water. Do not use alcohol or harsh cleaners, which can damage the glass coating. Let it dry completely before closing the lid. If the automatic feeder rollers are dirty, they can cause jams — use a dry cloth to wipe the rubber rollers inside the feeder tray.