What a temporal artery scanner does and why the reading matters
An Exergen temporal artery scanner is a non-contact infrared thermometer that reads body temperature by measuring heat radiating from the temporal artery—the blood vessel that runs across your forehead near your hairline. You hold it about half an inch to an inch away from the skin, press the button, and it displays your temperature in seconds on a small screen. The scanner does not touch your skin, which makes it faster and more sanitary than oral or ear thermometers, especially useful when someone is sick or when you need to check multiple people quickly.
The reading matters because it tells you whether a fever is present. A normal body temperature is around 98.6°F (37°C), though normal ranges from about 97°F to 99°F depending on the person and time of day. A reading of 100.4°F (38°C) or higher is generally considered a fever in adults. In children, fever thresholds are sometimes lower, so check with your pediatrician for what counts as a fever for your child's age.
Key Takeaways
- Hold the scanner half an inch to one inch from the center of the forehead, directly over the temporal artery.
- Make sure the forehead is dry and free of sweat, hair, hats, or headbands before taking a reading.
- Press and hold the button until you hear a beep or see the temperature appear on the screen, usually within one to two seconds.
- If the reading seems wrong, wait a minute and try again on the opposite side of the forehead or on the inner wrist.
- Replace the batteries when the low-battery indicator appears, and store the scanner at room temperature away from direct sunlight.
Preparing the forehead for an accurate reading
The accuracy of your reading depends heavily on the condition of the skin you are scanning. Wipe the forehead with a dry cloth or tissue to remove sweat, moisture, or dirt. Sweat cools the skin and will give you a reading that is lower than actual body temperature. If the person has been wearing a hat, headband, or anything that covers the forehead, remove it and wait about 30 seconds for the skin to return to normal temperature.
Hair should be brushed away from the forehead so it does not block the scanner's infrared beam. If someone has bangs or long hair hanging over the temporal artery, gently push it back. Do not scan through hair—the reading will be inaccurate. For people with very oily skin or heavy makeup on the forehead, a quick wipe with a dry cloth is usually enough; you do not need to wash the area.
Positioning the scanner and taking the reading
Hold the scanner perpendicular to the forehead—that means the front of the device should point straight at the skin, not at an angle. Position it about half an inch to one inch away from the center of the forehead, directly over where the temporal artery runs. This is roughly in line with the outer edge of the eyebrow, in the area between the temple and the hairline.
Press and hold the button on the scanner. You will hear a beep or see the temperature display light up on the screen. Most Exergen models take one to two seconds to register the temperature. Do not move the scanner while the button is pressed—keep it steady and pointed at the same spot. Once the beep sounds or the display stops changing, release the button and read the temperature on the screen.
What to do if the reading seems wrong
If the temperature looks too high or too low compared to how the person feels, the most common cause is improper positioning or a dirty forehead. Wait about one minute and try again on the opposite side of the forehead. Make sure the skin is dry and the scanner is held at the correct distance and angle.
Some Exergen models have an alternative scanning method: you can also take a reading on the inner wrist, just below the wrist bone on the inside of the arm. This method is less common but can be useful if the forehead is inaccessible or if you want to double-check a forehead reading. Press the button and hold the scanner against the inner wrist for about three seconds. The wrist reading may be slightly lower than a forehead reading, so note which method you used if you are tracking temperature over time.
Caring for the scanner and replacing batteries
Exergen temporal scanners run on AA or AAA batteries depending on the model. When the low-battery indicator appears on the screen—usually a small battery symbol or a dimming display—replace the batteries promptly. Open the battery compartment on the back or bottom of the device, remove the old batteries, and insert new ones, making sure the positive and negative ends are oriented correctly. Refer to the label inside the compartment if you are unsure.
Store the scanner at room temperature, away from direct sunlight, extreme heat, or moisture. Do not leave it in a hot car or a damp bathroom. If the lens (the small window on the front) becomes dusty or smudged, gently wipe it with a soft, dry cloth. Do not use water or cleaning solutions on the lens, as moisture can damage the infrared sensor inside. If the scanner gets wet, let it dry completely before using it again.
When to call a doctor instead of relying on the thermometer
A thermometer tells you the temperature, but it does not diagnose illness. A fever is a symptom, not a disease itself. Contact a doctor if a fever lasts more than three days, if it is accompanied by severe symptoms like difficulty breathing or chest pain, or if the person is very young (under three months), very old, or has a weakened immune system. A high fever alone—even 103°F or 104°F—is not always an emergency, but the context matters: how the person feels, what other symptoms are present, and their medical history.
If you are unsure whether a reading is concerning, call your doctor or nurse hotline. They can help you decide whether to wait, try home care, or seek when ready attention. The scanner is a tool to give you information, not a substitute for medical judgment.
Frequently Asked Questions
Can I use the scanner on a baby or small child?
Yes, the non-contact design makes it safer for babies and children than oral or ear thermometers. However, keep the baby still and make sure the forehead is clean and dry. Babies move around, so you may need to try a couple of times to get a steady reading. If your child is under three months old and has a fever, contact your pediatrician right away regardless of the exact temperature.
Why does the scanner give me different readings each time?
Small differences between readings are normal—usually within 0.5°F. Larger swings usually mean the forehead was not prepared the same way each time (sweat, hair in the way, or wrong distance from the skin). Try again with a clean, dry forehead and the scanner held at the correct distance. If readings are wildly different, the batteries may be low.
Is the scanner accurate compared to an oral thermometer?
Temporal artery scanners are generally accurate when used correctly, but they can read slightly lower than oral thermometers in some cases. If you are tracking temperature over time, use the same method each time so your readings are consistent. If you need a definitive temperature for medical reasons, ask your doctor which method they prefer.
Can I scan through a thin layer of clothing or a bandage?
No. The infrared beam needs direct contact with bare skin to read accurately. Remove any hats, headbands, or hair coverings. If there is a bandage or patch on the forehead, scan the other side or use the inner wrist method instead.
What should I do if the scanner will not turn on?
Check that the batteries are installed correctly and have not run out. Open the battery compartment and make sure the positive and negative ends are facing the right direction. If the batteries are new and the scanner still will not turn on, the device may need repair or replacement. Contact the manufacturer or the retailer where you bought it.