What the Network Scanner Holotape does
The Network Scanner Holotape is a tool in Fallout that lets you locate and map nearby network nodes, terminals, and connected devices in a given area. When you use it, your Pip-Boy displays the positions of these networked objects on your local map, making it easier to find terminals, turrets, or other connected systems you might otherwise miss. It does not hack terminals or disable devices — it only shows you where they are.
The holotape is most useful when you are exploring a location with multiple interconnected systems, such as a vault, military installation, or corporate facility. Instead of wandering room to room looking for a terminal that controls a door or turret, you can see at a glance where the network nodes sit and plan your route accordingly.
Key Takeaways
- The Network Scanner Holotape shows network nodes and connected devices on your local map when you use it from your Pip-Boy.
- You must have the holotape in your inventory and access your Pip-Boy to run it; it does not work from a distance.
- The scan covers only the area around your current location, so you may need to use it multiple times as you move through a building.
- Network nodes appear as markers on your map but do not reveal what those terminals control until you reach them.
How to run the Network Scanner Holotape
First, make sure the holotape is in your inventory. Open your Pip-Boy by pressing the appropriate button for your platform (Tab on PC, Start on console). Navigate to the Holotapes section, which is usually found under the main menu or in a dedicated tab depending on your game version.
Locate the Network Scanner Holotape in the list and select it. Choose the option to play or run the holotape. Your character will set up it, and within a few seconds, the scan will complete. Any network nodes within range will now appear as markers on your local map, typically shown as small icons or highlighted points.
The scan is when ready and does not consume the holotape — you can use it as many times as you want without it breaking or disappearing from your inventory. There is no cooldown between uses, so you can run multiple scans in quick succession if you move to a new area or want to double-check what you saw.
Understanding the map markers the scan creates
When the Network Scanner Holotape runs, it places markers on your local map showing where network nodes exist. These markers are distinct from regular location markers and usually appear in a different color or style so you can tell them apart. The exact appearance depends on your game version and any mods you have installed, but they are always clearly labeled as network nodes.
The markers show only the location of the nodes themselves, not what they control or what terminals are connected to them. You still need to reach each node and interact with it to learn what systems it governs. This means the holotape is a navigation tool first — it gets you to the right room, but you still have to do the work of hacking or finding passwords once you arrive.
When to use the Network Scanner Holotape
Use the holotape when you are trying to find a specific terminal or system in a large building and do not want to search every room manually. If a quest marker points you toward "a terminal that controls the vault door" but does not tell you which room it is in, running the scanner will show you all networked terminals in the area so you can narrow down your search.
It is also useful when you are trying to map out a facility's layout before committing to a particular path. If you see that all the network nodes cluster in one wing of a building, you know that is where the important systems are. If they are scattered throughout, you know you will need to explore more widely.
The holotape is less useful in outdoor areas or small locations with only one or two terminals, since you can usually find those by exploring normally. It shines in large vaults, military bunkers, and corporate headquarters where terminals are numerous and spread across multiple floors or wings.
Limitations of the Network Scanner Holotape
The scan range is limited to your when ready area — typically the current cell or zone you are standing in. If you move to a different room or floor, the old markers may disappear and you will need to run the scan again to see nodes in your new location. This means you cannot scan an entire building from the entrance; you have to move through it and scan as you go.
The holotape shows only networked devices. Standalone terminals that are not connected to any system will not appear on the scan. Similarly, if a terminal has been disconnected or powered down, it may not show up. This is rare, but it means the scan is not a complete inventory of every terminal in a location — only the active, networked ones.
The holotape also does not tell you the difficulty level of the terminals it finds, whether they are locked, or what they control. You still have to reach each one and interact with it to learn those details. It is a location tool, not an intelligence tool.
Where to find the Network Scanner Holotape
The Network Scanner Holotape is not a starting item, so you will need to find it during your playthrough. It typically appears as loot in technical locations such as vaults, military installations, and research facilities. Check terminals, safes, and desk drawers in areas with heavy computer or security infrastructure.
Some vendors who deal in technical goods or rare items may stock it, though availability varies by game version and your character's level. If you cannot find one through exploration, check with traders in major settlements or faction vendors who specialize in technical equipment.
Once you have one, you can use it indefinitely — it does not break, degrade, or consume charges. You only need to find it once per playthrough.
Frequently Asked Questions
Does the Network Scanner Holotape hack terminals for me?
No. The holotape only shows you where networked terminals and devices are located on your map. You still have to reach each terminal, interact with it, and hack it yourself if it is locked. The holotape is a navigation aid, not a hacking tool.
Can I use the Network Scanner Holotape from far away?
No. You must be in the same area as the network nodes for the scan to detect them. The range is limited to your current cell or zone. If you move to a different room or floor, you will need to run the scan again to see nodes in that new location.
What if the Network Scanner Holotape does not show any markers?
It means there are no networked devices in your current area, or all networked devices are powered down or disconnected. Try moving to a different room or floor and running the scan again. Some locations have fewer networked systems than others.
Can I lose the Network Scanner Holotape?
Yes, like any inventory item. If you drop it or sell it to a vendor, you will need to find another one. However, once you have used it to scan an area, the markers remain on your map even if you no longer have the holotape in your inventory.