What a police scanner does and how to turn it on

A police scanner is a radio receiver that picks up transmissions from law enforcement, fire, and emergency medical services in your area. When you turn one on and tune it to the right frequency, you hear dispatchers sending units to calls and officers reporting back in real time. The scanner does not let you transmit — you only listen.

Most scanners have a power button on the front or side. Turn it on, and you will see a display light up showing a frequency number. The volume knob is usually on the front panel. Start with the volume low, then adjust it up until you can hear the transmissions clearly. Some scanners have a squelch knob — turning it clockwise reduces static between transmissions so you only hear actual radio traffic.

If your scanner is new, it may come with a default frequency already programmed in. If you hear nothing but static, the frequency you are on may not be active in your area, or you may need to program in the correct frequencies for your local agencies. That is the next step.

Key Takeaways

  • Police scanners receive radio transmissions from law enforcement and emergency services, but you can only listen — you cannot transmit or communicate back.
  • You must program your scanner with the correct frequencies for your city or county, which you can find through online frequency databases or your local police department's website.
  • Most scanners let you program multiple frequencies and scan through them automatically, stopping when activity is detected on one channel.
  • Listening to a scanner is legal in all 50 states, but recording and sharing transmissions has restrictions that vary by state and by what type of call you are recording.
  • Trunked radio systems used by many larger agencies require a scanner that supports trunking, or you will hear only fragments of conversations.

Finding and programming the right frequencies for your area

Radio Reference (radioreference.com) is the largest free database of scanner frequencies in North America. Go to the site, select your state, then your county. You will see a list of agencies — police, fire, sheriff, highway patrol — with their frequencies listed. Write down or screenshot the frequencies you want to monitor.

Your local police department's website often lists frequencies too, usually under a "Scanner Frequencies" or "Radio Information" page. Some departments post them to help the public understand what they are hearing during major incidents.

Once you have the frequencies, open your scanner's programming menu. Most scanners have a button labeled "Menu" or "Program." You will enter each frequency number using the keypad, assign it a name (like "City Police" or "County Fire"), and save it. The exact steps depend on your scanner model — your manual will walk you through it. If you lost the manual, search the model number plus "programming guide" online and you will usually find a PDF.

After you program several frequencies, set your scanner to "Scan" mode. It will cycle through each frequency you entered and stop when it detects activity, letting you hear the full transmission. When the channel goes quiet, it moves to the next frequency.

Understanding what you are hearing

Police and fire radio traffic follows a pattern. A dispatcher sends a unit to a call — "Unit 12, respond to a traffic accident at Main and Fifth" — and the unit confirms — "Unit 12 en route." You hear the unit arrive, report what they find, and request additional resources if needed. The dispatcher coordinates all of this across multiple units and calls happening at the same time.

Codes vary by agency. Some use plain language ("traffic accident," "welfare check"), while others use codes like "10-54" or "Signal 7." Radio Reference includes code lists for most agencies, so you can look up what you are hearing. Many dispatchers also repeat calls in plain language, so you will understand the gist even if codes are used.

Fire and EMS transmissions sound similar — a dispatcher sends an ambulance or fire truck to a medical call, and crews report their status. You may hear them request additional units, report patient conditions, or coordinate with hospitals.

Trunked radio systems and why some scanners cannot hear them

Larger cities and counties often use trunked radio systems, which work differently from conventional frequencies. Instead of each agency having its own frequency, a trunked system shares frequencies dynamically — the system assigns an available channel to each call as it happens. If your scanner does not support trunking, you will hear fragments of conversations jumping between channels, or nothing at all.

To monitor a trunked system, you need a scanner that explicitly supports it. Look for the phrase "trunking capable" or "P25 capable" in the scanner's specifications. You will also need the system ID number for your area, which you can find on Radio Reference. Programming a trunked system is more involved than conventional frequencies, but the process is the same: enter the system ID into your scanner, and it handles the rest.

If you live in a major metro area and your scanner is not picking up police or fire traffic, trunking is usually the reason. Check Radio Reference for your county — it will tell you whether your area uses trunked or conventional frequencies, and what type of scanner you need.

Legal limits on listening and recording

Listening to a police scanner is legal everywhere in the United States. You can sit in your home or car and monitor emergency traffic without any restriction.

Recording is more complicated. Federal law allows you to record any radio transmission that is not encrypted. However, many states have added restrictions on recording police or fire calls. Some states require the consent of all parties to the conversation (which you cannot get from a radio transmission), while others ban recording entirely. A few states allow recording but prohibit sharing or publishing it without permission.

The safest approach is to check your state's wiretapping and recording laws before you record anything. Search "[your state] recording police radio" and look for your state's attorney general website or a summary from a legal resource. If you plan to share recordings online or with media, contact a local attorney first — the rules are specific and the penalties can be serious.

Choosing between handheld, mobile, and base station scanners

Handheld scanners are portable, battery-powered, and cost between $100 and $400. They work well if you want to monitor while you are out, but the antenna is small and the range is limited — usually a few miles in open terrain, less in a city with buildings blocking the signal.

Mobile scanners mount in a car and plug into the car's power. They have larger antennas and longer range than handhelds, typically 10 to 20 miles depending on terrain and the power of the transmitter. They cost $200 to $600.

Base station scanners stay in one place — usually a home or office — and plug into wall power. They have the largest antennas and the best range. A good external antenna can pick up traffic 30 miles away or more. Base stations cost $300 to $800, but if you want consistent, clear reception, they are the most reliable option.

If you are new to scanning, a handheld is a good way to start. You can move it around to find the best reception spot in your home, and if you decide scanning is not for you, you have not invested much. Once you know what you want to monitor, a base station with an external antenna will give you much better results.

Troubleshooting common problems

You hear only static. The frequency you are on is either not active in your area, or your scanner is not programmed correctly. Double-check the frequency number against Radio Reference. If it matches, try a different frequency from the same agency. If you still hear only static, your scanner may not be compatible with your area's radio system — check whether your county uses trunking and whether your scanner supports it.

You hear traffic but it is hard to understand. Adjust the squelch knob to reduce static between transmissions. If the signal is weak, move your scanner to a higher location or closer to a window. If you have a handheld, try moving to different rooms. An external antenna (available for most scanners) will improve reception significantly.

You programmed frequencies but the scanner will not scan them. Make sure you are in Scan mode, not manual frequency mode. Check your manual for the correct button sequence. Some scanners require you to mark frequencies as "active" before they will scan them — look for a checkbox or "active" setting in the programming menu.

You hear encrypted traffic (garbled sounds). Many police departments now encrypt their radio traffic for privacy and security. Standard scanners cannot decode encrypted transmissions. You will still hear fire and EMS traffic, which is usually not encrypted, but police calls will be unreadable. This is intentional and legal.

Frequently Asked Questions

Can police tell if I am listening to a scanner?

No. A scanner only receives — it does not transmit any signal. Police have no way to know you are listening unless you tell them or use the scanner to interfere with their communications, which is illegal.

What is the difference between a scanner and a CB radio?

A scanner receives only; a CB radio transmits and receives. Scanners pick up police, fire, and emergency services. CB radios are used by truckers and hobbyists on a shared frequency. They are different devices for different purposes.

Do I need a license to own a scanner?

No. You do not need any license or permit to own or operate a scanner in the United States. You can buy one and start listening when ready.

Why do some police departments encrypt their radio traffic?

Encryption protects officer safety and ongoing investigations. It also prevents criminals from hearing dispatch information in real time. Fire and EMS are usually not encrypted because the public benefit of knowing where emergency services are responding outweighs the privacy concerns.

Can I use a scanner app on my phone instead of a physical scanner?

Yes. Apps like Broadcastify and Scanner Radio stream live audio from scanners in your area. They work over Wi-Fi or cellular data and cost nothing or a small monthly fee. The downside is that you depend on someone else's scanner and internet connection, so the audio quality and availability vary. A physical scanner gives you direct access and more control.