What the Scanner Room Does and Where to Build It

The Scanner Room is a base module that scans the ocean floor around your base and marks resources on your PDA map. It shows you where to find materials, creatures, and wrecks within a radius of 500 meters — far enough to plan your next dive without leaving your base. You build it like any other room: place a foundation, add the module, and connect it to your base with corridors or hatches.

The Scanner Room works best when you anchor it to a stable location near resource-rich areas. If you build it near a kelp forest, it will map out the plants and creatures there. If you place it near a wreck, it highlights the wreck's location on your map. The room itself is small — it takes up one foundation square — so it fits into most base layouts without taking up much space.

You need the Scanner Room blueprint to craft it. You find this blueprint in the Aurora, in the Mushroom Forest, or by scanning the Scanner Room fragments scattered around the map. Once you have the blueprint, you craft it in a fabricator using 1 Titanium, 1 Magnetite, 2 Glass, and 1 Lubricant.

Key Takeaways

  • The Scanner Room scans 500 meters around your base and marks resources, creatures, and wrecks on your PDA map.
  • You build it on a foundation like any other base module and power it with your base's power grid.
  • Once powered, you interact with the control panel inside to select what you want to scan for.
  • Each scan takes time and power, so you cannot scan everything at once — choose what matters for your current goal.
  • The Scanner Room is most useful when placed near resource hotspots or wreck sites you plan to explore.

Building the Scanner Room in Your Base

Start by placing a foundation where you want the Scanner Room. You can build it on the ocean floor, on a floating platform, or attached to an existing base structure. Once the foundation is down, open your build menu, select the Scanner Room module, and place it on the foundation. The module snaps into place automatically.

Connect the Scanner Room to your base with corridors, hatches, or multipurpose rooms so you can walk inside it. If you build it as a standalone structure, you will need a hatch or corridor leading to it. The room has one interior control panel on the wall — this is where you interact with the scanner.

Make sure your base has power running to the Scanner Room. It draws 5 power per second when idle and 10 power per second when actively scanning. If your power runs low, the Scanner Room shuts down until you restore power. A solar panel or thermal plant nearby will keep it running steadily.

How to Use the Scanner Control Panel

Walk inside the Scanner Room and approach the control panel on the wall. Press the interact button (E on keyboard, or the button shown on your controller) to open the scanner interface. The screen shows a list of resources, creatures, and structures you can scan for.

Scroll through the list and select what you want to find. You can search for specific materials like Copper Ore or Lithium, creatures like Stalkers or Reaper Leviathans, or structures like wrecks and alien bases. Once you select an item, the scanner begins searching. A progress bar fills as the scan runs — this takes 10 to 20 seconds depending on what you are scanning for.

When the scan finishes, the Scanner Room marks all instances of that item on your PDA map within the 500-meter radius. Green markers show resources and structures. Red markers show dangerous creatures. You can now navigate to any marked location and know what you will find there before you arrive.

Understanding Scan Range and Power Drain

The Scanner Room searches in a sphere 500 meters in all directions from the room itself. This is a large area — large enough to cover most biomes around your base. However, the scan does not penetrate solid rock or the Aurora's hull, so some resources inside caves or wrecks may not show up.

Each scan uses power from your base. A single scan drains about 50 to 100 power depending on the item. If you scan for multiple items in a row, your power bar drops quickly. Plan your scans around your power production. If you have a solar panel producing 50 power per second, you can run several scans before power becomes an issue. If you rely on a single thermal plant, you may need to wait between scans.

The Scanner Room itself uses 5 power per second just to stay active, even when not scanning. If you want to save power, you can turn the room off by cutting power to it or by disabling it in your base menu. Turn it back on when you need to scan again.

What to Scan For at Different Stages

Early in the game, scan for basic materials you need to expand your base: Copper Ore, Titanium, Quartz, and Limestone. These show up in most biomes and the Scanner Room saves you time hunting for them. Once you have enough, move on to rarer materials like Magnetite or Lithium, which appear in specific zones.

As you progress, use the Scanner Room to locate wrecks and alien structures. Scanning for "Wreck" or "Alien Base" marks their locations so you can plan expeditions. You can also scan for dangerous creatures to know where they patrol — useful if you want to avoid a Reaper Leviathan or track down a specific creature for research.

Late-game players use the Scanner Room to find the final materials needed for the Neptune rocket or to locate the Ghost Leviathan spawning zones. The Scanner Room does not tell you what is inside a wreck, but it tells you where to look, which cuts exploration time in half.

Troubleshooting Common Scanner Room Problems

If the Scanner Room does not power on, check that your base has power and that the room is connected to the power grid. Walk to the power management panel in your base and confirm the Scanner Room is receiving power. If the power bar shows zero, build more power generators or repair damaged ones.

If a scan returns no results, the item may not exist within 500 meters of your base, or it may be hidden inside a structure the scanner cannot penetrate. Try moving the Scanner Room to a different location or scanning for a different item to confirm the room is working. You can also scan for creatures — if creatures show up, the room is functioning and the resource you wanted is straightforward not nearby.

If the Scanner Room is slow to scan, this is normal. Scans take 10 to 20 seconds by design. Do not spam the scan button — wait for one scan to finish before starting another, or you will drain power without getting results.

Frequently Asked Questions

Can I scan through walls and rock?

The Scanner Room scans through water and sand but not through solid rock or metal structures. Resources inside caves or wrecks may not show up on the scan. If a scan returns no results for something you know is nearby, it is likely hidden inside a structure the scanner cannot penetrate.

How much power does the Scanner Room use?

The Scanner Room uses 5 power per second when idle and 10 power per second while actively scanning. A single scan drains 50 to 100 total power depending on what you are searching for. Plan your scans around your base's power production to avoid running out of power.

What is the maximum range of the Scanner Room?

The Scanner Room searches in a 500-meter radius around the room in all directions. This covers most biomes adjacent to your base. If you need to scan a distant area, you can build a second Scanner Room closer to that location.

Do I need multiple Scanner Rooms?

One Scanner Room is enough for most playthroughs. However, if you build bases in multiple locations, a second Scanner Room near your second base saves travel time. You can also place one Scanner Room in a central location and another in a distant biome to scan both areas without moving your main base.

Can the Scanner Room detect the Cyclops or other vehicles?

The Scanner Room does not scan for vehicles. It scans for resources, creatures, and structures only. If you want to find your Cyclops, you will need to navigate manually or use the vehicle's own sonar system.