What Scanner Stations Do and Where to Find Them

A Scanner Station in Subnautica 2 is a habitat module that scans the ocean floor around your base and catalogs every creature, plant, and resource in range. When you build one and power it on, it creates a circular scan zone—typically about 500 meters in radius—and automatically identifies everything living or mineable within that area. The scan results appear in your PDA under a new "Scanned" section, organized by biome and species.

You can build Scanner Stations in any habitat base once you have the blueprint. Early game, you'll find the blueprint in wrecks or by scanning certain fabricators. The station itself requires metal ingots, glass, and a power cell to construct. Place it on the foundation of your base like any other module—it doesn't need to be external, though many players put it on the exterior for easier access.

Key Takeaways

  • Scanner Stations automatically scan all creatures and resources within 500 meters and log them in your PDA for reference.
  • You must power the station with a power cell or connect it to your base's power grid for it to function.
  • Each scan takes a few seconds; you can queue multiple scans or let the station run continuously in the background.
  • Scanned data helps you locate rare resources, track creature behavior, and plan base expansions without leaving your habitat.
  • The station will not scan creatures or resources that are already in your inventory or inside containers in the base.

Building and Powering Your Scanner Station

To build a Scanner Station, open your habitat constructor and select the module from the available blueprints. You'll need 2 metal ingots, 1 glass, and 1 power cell to fabricate it. Place it on a foundation or directly on the seabed if your base is small enough. The module takes up one habitat slot, so plan your layout before committing.

Power is essential. The Scanner Station draws energy continuously while active, so connect it to your base's power grid if possible—run a power conduit from your main reactor or battery bank to the module. If you don't have a grid set up yet, you can insert a power cell directly into the station's power slot. A full power cell will keep the station running for several minutes of active scanning. Replace it when the cell depletes, or switch to a grid connection for unlimited uptime.

Running Scans and Reading the Results

Once powered, approach the Scanner Station and interact with it. A menu appears with options to scan specific categories—creatures, flora, minerals, or everything at once. Select your target and the station begins scanning. A progress bar fills as the scan runs, usually taking 5 to 10 seconds depending on how much is in range. You'll see a notification when the scan completes.

Results appear in your PDA under the Scanner section, organized by biome and type. Each entry shows the creature or resource name, a brief description, and sometimes a location hint. If you scan the same area twice, the second scan updates your data with any new discoveries. The station does not remove items from the ocean or your inventory—it only catalogs what exists.

Common Mistakes and How to Avoid Them

The most frequent error is forgetting to power the station. If you build it but don't insert a power cell or connect it to your grid, the interact menu won't appear and the station will sit dormant. Always check the power indicator on the module itself—it should glow when active.

Another mistake is expecting the station to scan inside your base containers. It won't. The Scanner Station only detects creatures and resources in the open ocean around your base, not items stored in lockers or fabricators. If you want to track what you've collected, use your inventory or container labels instead.

Players also sometimes place the station too deep or in a biome with poor visibility, then wonder why scans seem incomplete. The station scans everything in range regardless of visibility, but you may miss visual confirmation. Trust the PDA data—if it's listed, it's there.

Using Scanner Data to Plan Your Base

Scanner results are most useful for resource planning. If you're building a new base section and need copper or lithium, scan the area first to confirm deposits are nearby. The PDA will tell you what minerals are in range, so you can decide whether to relocate or send a mining expedition. This saves time and materials spent on a base in a resource-poor zone.

Creature data helps with safety planning too. If your scans show aggressive fauna in the area, you might add external airlocks or defensive structures. Conversely, if scans show only passive creatures, you can build more openly. Over time, your Scanner Station becomes a reference library of your base's surroundings.

Upgrading and Expanding Scanner Coverage

Some versions of Subnautica 2 allow Scanner Station upgrades that increase scan range or speed. Check your fabricator for upgrade modules once you've unlocked advanced blueprints. These upgrades typically require rarer materials but extend your scan radius significantly, letting you monitor a much larger territory from a single base.

If you build multiple bases, each one can have its own Scanner Station. This is useful for tracking resources across different biomes or monitoring creature populations in distant areas. Each station operates independently, so you'll have separate scan data for each location in your PDA.

Frequently Asked Questions

Does the Scanner Station use power when I'm not actively scanning?

Yes, it draws a small amount of power continuously while the base is powered, even if you're not using it. If power is scarce, you can disconnect the power conduit when you don't need scans, then reconnect it later. This is less convenient than a grid connection but saves energy in early game.

Can I scan creatures that are inside my base?

No. The Scanner Station only detects creatures and resources in the open ocean. Anything inside your habitat, including creatures in tanks or items in containers, won't show up in scans. It's designed to monitor your external surroundings.

What happens if I move my base or deconstruct the Scanner Station?

Your scan data remains in your PDA even if you deconstruct the station or move away. You can rebuild it elsewhere and continue scanning. The data is tied to your save file, not the physical module, so you won't lose your discoveries.

How often should I re-scan the same area?

Creatures move and resources respawn, so re-scanning every few in-game days gives you updated information. There's no penalty for scanning repeatedly—it's just a matter of whether you want current data. For a stable base, one initial scan is often enough unless you're tracking specific creatures.

Can I scan areas I haven't visited yet?

The Scanner Station only scans within its range around your base. You can't use it to scout distant biomes unless you build a base there first. This is why many players build small outpost bases in new areas—to scan and gather data before committing to a full habitat.