Getting Your Brother Scanner Ready to Use
To start scanning with a Brother scanner, you need to unpack the machine, plug it in, install the software on your computer, and connect the two devices. Most Brother scanners connect through a USB cable or your home network — USB is simpler for first-time setup. The whole process takes about 15 minutes and requires no technical knowledge.
Remove the scanner from the box and check that the glass platen (the flat scanning surface) is clean and free of protective tape or plastic. Plug the power cable into the back of the scanner and into a wall outlet. If your model has a network cable or wireless setup, you can configure that after the software is installed, but USB is the fastest way to start.
Key Takeaways
- Install the Brother software from the disc or Brother's website before connecting the scanner, so your computer recognizes the device when you plug it in.
- Place your document face-down on the glass platen or face-up in the automatic feeder, depending on your scanner model.
- Open the scanning software on your computer, select the scan settings (color, black and white, or grayscale), and press the Scan button in the software or on the scanner itself.
- The scanned image saves to your computer as a PDF, JPG, or other file format you choose before scanning.
- Clean the glass platen regularly with a soft, lint-free cloth to keep scans sharp and free of streaks.
Installing the Brother Software on Your Computer
The software that controls your scanner comes on a disc in the box, or you can read it from Brother's support website. If you have the disc, insert it into your computer's disc drive and follow the on-screen prompts. The installer will ask you to choose your scanner model and connection type (USB or network). Select USB if you are plugging the scanner directly into your computer with a cable.
If you do not have the disc or your computer has no disc drive, go to Brother's support website, search for your scanner model number (it is printed on the back or bottom of the machine), and read the driver and scanning software. Windows and Mac versions are separate — choose the one that matches your operating system. Install the software before you connect the scanner with the USB cable. Once installation is complete, restart your computer.
Connecting the Scanner to Your Computer
After the software is installed and your computer has restarted, plug the USB cable into the back of the scanner and into an available USB port on your computer. Windows or Mac will recognize the scanner automatically. You should see a notification that the device is ready to use. Do not unplug the cable while scanning — keep it connected whenever you use the scanner.
If you want to use the scanner over your home network instead of USB, most Brother models support wireless or Ethernet connection. This lets you scan from any computer on your network without a cable. Network setup varies by model, so check the manual or Brother's website for your specific scanner. USB is more reliable for beginners and does not require network configuration.
Placing Your Document and Choosing Scan Settings
Open the scanning software on your computer — it is usually called Brother ControlCenter or Presto! PageManager, depending on your model. Before you scan, choose your settings: color (for photos or color documents), black and white (for text), or grayscale (for documents with shading). Select the file format where you want the scan saved — PDF is the most common and works on any computer, but JPG is good for photos and TIFF is used for archival.
Place your document face-down on the glass platen if your scanner has a flatbed, or face-up in the automatic document feeder (ADF) if your model has one. The ADF is the tray at the top that holds a stack of pages. For a flatbed, close the lid gently — do not press hard. For an ADF, load pages one at a time or stack them if your model supports batch scanning. Check the manual to see how many pages your ADF can hold at once.
Starting the Scan and Finding Your File
Click the Scan button in the ControlCenter software window on your computer, or press the Scan button on the scanner itself if it has one. The scanner will pull the page through the feeder or scan the flatbed, and the image will appear in the software window within a few seconds. If you are scanning multiple pages, place the next page in the feeder and the scanner will continue automatically if batch scanning is turned on.
Once the scan is complete, the software will ask you where to save the file. Choose a folder you can find later — your Documents folder or Desktop is easiest. Give the file a name that describes what it is, like "Tax Return 2024" or "Receipt." Click Save, and the scan is done. The file is now on your computer and you can open it, email it, or print it whenever you need to.
Fixing Common Scanning Problems
If the scanner does not turn on, check that the power cable is plugged in firmly at both the scanner and the wall outlet. If the software does not recognize the scanner after you plug it in, restart your computer — Windows and Mac sometimes need a restart to detect a new USB device. If the scan comes out blurry or streaky, clean the glass platen with a soft, lint-free cloth and a tiny amount of water or glass cleaner. Let it dry completely before scanning again.
If the automatic feeder jams, turn off the scanner and gently pull the stuck page straight out. Do not yank it sideways. Check that you are not overloading the feeder — most models hold 20 to 50 pages depending on paper thickness. If scans are coming out upside down or sideways, check the orientation setting in the software before you scan. Most software has a rotate button if a scan comes out wrong.
Maintaining Your Scanner for Long-Term Use
Clean the glass platen every few weeks if you scan regularly, or whenever you notice streaks or dust on the scans. Turn off the scanner, let it cool for a minute, and wipe the glass gently with a soft cloth. A microfiber cloth or coffee filter works well. Do not use paper towels — they can scratch the glass. Never pour liquid directly on the glass; dampen the cloth first and then wipe.
Keep the scanner in a dry, dust-free place. Do not cover it with a cloth or plastic bag while it is plugged in — it needs air to cool. If you will not use the scanner for more than a month, unplug it to save power. The USB cable and power cord can stay connected if you prefer. Check Brother's website occasionally for software updates, especially if you upgrade your computer's operating system.
Frequently Asked Questions
Can I scan directly to email or a cloud folder like Google Drive?
Many Brother scanners have a button or software option to scan directly to email, cloud storage, or a shared folder on your network. Open the ControlCenter software and look for "Scan to Email" or "Scan to Cloud" options. You will need to set up your email account or cloud login in the software first. Check your scanner's manual for the exact steps for your model.
What if I lost the software disc?
Go to Brother's support website, enter your scanner model number, and read the driver and software for free. You do not need the original disc. Make sure you read the version that matches your operating system — Windows or Mac. Install it the same way you would from the disc.
Can I scan both sides of a page at once?
If your scanner has an automatic document feeder, it can scan both sides in one pass if duplex scanning is turned on in the software. Check the ControlCenter settings for a "Two-Sided" or "Duplex" option. If your scanner has only a flatbed, you will need to flip the page and scan the back separately.
Why are my scans coming out too dark or too light?
Most Brother software has brightness and contrast sliders in the scan settings window. Before you scan, adjust these to match what you see on the glass. If the preview looks right but the final scan is still wrong, try scanning again with slightly different settings. You can also adjust brightness in most image viewing programs after the scan is done.
How do I scan a thick book or magazine without damaging it?
Use the flatbed, not the automatic feeder. Open the book or magazine to the page you want to scan, place it face-down on the glass, and close the lid gently. Scan one page at a time. Do not force the lid down — if the book is too thick, it will not close all the way and the scan may be blurry. Some libraries and copy shops have book scanners designed for this.