A PET scanner is a large, tunnel-shaped machine that looks similar to a CT or MRI scanner, but it's usually shorter and wider

The scanner itself is a hollow cylinder, typically about 24 inches in diameter and 3 to 4 feet long. The opening faces you as you lie on a motorized table that slides into the tunnel. The machine is mounted on a large gantry—a metal frame that holds all the equipment—and sits in a dedicated room with thick walls to contain radiation.

The outside casing is usually white or light gray plastic or metal. You'll see cables and cooling systems running along the back and sides. The control room is separated from the scanning room by a thick glass window so technicians can see you during the scan.

The table you lie on is narrow and padded, similar to what you'd find in other imaging rooms. It moves smoothly in and out of the tunnel as the scan progresses. Most PET scanners are about the size of a large refrigerator standing on its end, though some hybrid machines that combine PET with CT are larger and more box-shaped.

Key Takeaways

  • A PET scanner is a hollow cylinder about 24 inches wide and 3 to 4 feet long, with a motorized table that slides into the opening.
  • The machine sits inside a metal frame called a gantry and is housed in a specially shielded room to contain radiation.
  • The outside is typically white or light gray, and the control room is separated by thick glass so staff can monitor you during the scan.
  • Hybrid PET/CT scanners are larger and more rectangular because they combine two imaging systems in one machine.
  • The scanning tunnel is wider and shorter than an MRI, which makes it less confining for people who feel anxious in enclosed spaces.

How the inside of a PET scanner is different from what you see on the outside

Inside the tunnel, you won't see much—the walls are smooth and plain. What you can't see is the ring of detectors that sits just outside the tunnel opening. These detectors pick up radiation signals from the tracer you were injected with before the scan. The detectors are arranged in a circle around the tunnel, so they can sense signals coming from all directions inside your body.

Behind those detectors are cooling systems and electronics that process the signals in real time. The machine generates a lot of heat, so you'll hear fans running during the scan. You may also hear clicking or buzzing sounds as the detectors work—this is normal and means the scan is running properly.

The table moves very slowly through the tunnel, stopping at different positions so the detectors can build up a complete picture of where the tracer has accumulated in your body. The whole process usually takes 20 to 40 minutes, depending on what part of your body is being scanned.

PET scanners versus CT and MRI machines: what's different to look at

A PET scanner tunnel is noticeably wider and shorter than an MRI tunnel. An MRI tunnel is often 60 inches long and only 24 inches wide, which can feel very tight. A PET tunnel is usually wider (24 to 28 inches) and much shorter (3 to 4 feet), so there's less sense of being enclosed. This matters if you feel claustrophobic during medical imaging.

A CT scanner looks similar to a PET scanner from the outside—both are hollow cylinders on a gantry. The main difference is that a CT tunnel is even shorter and wider, and the scan happens much faster (usually under a minute). A PET scan takes much longer because the detectors need time to collect enough radiation signals.

Hybrid machines that combine PET and CT in one unit are larger and more rectangular. They have two separate tunnels or one longer tunnel with two sets of detectors. These machines take up more space in the room and are more expensive, but they let doctors see both metabolic information (from PET) and detailed anatomy (from CT) in a single session.

What you'll experience when you enter the scanning room

The scanning room is quiet and climate-controlled. The machine itself is the dominant feature—it's hard to miss. You'll see the motorized table in front of the tunnel opening, and the control room window to one side. The room is usually dimly lit so you can see the machine clearly but the lighting won't interfere with the scan.

Before you get on the table, a technician will position you and may use cushions or straps to keep you still during the scan. Once you're in position, the table will move into the tunnel slowly. You'll be able to see out of the tunnel opening the whole time, and you can communicate with the technician through a two-way speaker system if you need to stop.

The machine makes noise during the scan—fans, clicking, and occasional buzzing. This is expected and not a sign that anything is wrong. The technician will tell you before the scan starts what sounds you'll hear and how long it will take.

Portable and smaller PET systems you might encounter

Not all PET imaging happens in a large tunnel scanner. Some facilities use smaller, handheld PET probes or intraoperative PET systems that surgeons use during surgery to locate tumors in real time. These look like a wand or small detector and are held close to the area being examined.

There are also mobile PET units—full-sized scanners mounted in trucks or trailers—that travel to hospitals or clinics that don't have their own scanner. These look identical to stationary PET scanners from the inside, but they're housed in a vehicle.

For most people, though, a PET scan happens in a dedicated imaging center with a standard tunnel scanner. The experience is the same whether the machine is in a hospital, outpatient clinic, or cancer center.

Safety features you'll notice on a PET scanner

The thick walls of the scanning room are the most important safety feature—they're lined with lead or concrete to contain radiation. You won't see this from inside the room, but it's why the walls are so much thicker than in other parts of the building.

The control room is separated by thick glass and is positioned so staff are not exposed to radiation during scans. There's an emergency stop button on the table and a call button you can press if you need to stop the scan when ready. The technician can hear you through the speaker system at all times.

You'll also see warning signs on the door to the scanning room indicating that radiation is in use. These are standard precautions and are required by law. The amount of radiation you receive during a PET scan is carefully calculated and considered safe for diagnostic purposes.

Frequently Asked Questions

Is a PET scanner claustrophobic like an MRI?

PET scanners are generally less claustrophobic than MRI machines because the tunnel is wider and much shorter. However, if you have severe anxiety in enclosed spaces, tell your technician before the scan. They can explain what to expect and may be able to adjust your position or use relaxation techniques to help you through it.

Why does a PET scanner make so much noise?

The noise comes from cooling fans and the detectors working to collect radiation signals. The sounds are normal and expected. The technician will warn you about the noise before the scan starts so you're not startled. Earplugs are usually available if the noise bothers you.

Can I see inside the PET scanner tunnel before my scan?

Yes. The technician will show you the machine and let you see the tunnel opening before you lie down. You can ask questions and get a sense of the space. This can help reduce anxiety, especially if it's your first PET scan.

What's the difference between a PET scanner and a PET/CT scanner?

A PET/CT scanner combines two imaging systems in one machine. It's larger and more rectangular than a standalone PET scanner. The PET part detects radiation from the tracer, and the CT part takes detailed X-ray images. Many modern facilities use PET/CT because it gives doctors more information in one session.

How long does it take to get a PET scan?

The actual scanning time is usually 20 to 40 minutes, depending on what part of your body is being scanned and how much of your body needs to be imaged. You'll also spend time in the waiting room before the scan and time for positioning on the table, so plan for 1 to 2 hours total at the facility.