What the scanner displays to TSA officers
Airport body scanners show a generic outline of your body — not a photograph or detailed image of your actual face and features. The scanner detects objects on or under your clothing by using either millimeter-wave technology (radio waves) or backscatter X-ray (which bounces radiation off your skin). What the officer sees on the monitor is a simplified, featureless silhouette, similar to a mannequin shape, with highlighted areas where the scanner detected something that is not skin or standard clothing.
The image does not show your face, tattoos, scars, or skin tone. It does not reveal whether you are male or female — the outline is neutral. If the scanner detects an object, that area lights up or appears in a different color on the screen, but the officer cannot see what the object actually is from the image alone. That is why officers perform a physical pat-down or ask you to remove the item if the scanner flags something.
The scanner cannot see inside your body. It does not detect internal organs, medical implants, or anything beneath the surface of your skin. If you have a pacemaker, artificial joint, or other metal implant, you should tell the officer before you enter the scanner — they will use a metal detector or pat-down instead.
Key Takeaways
- The scanner shows only a featureless outline of your body shape, not your face, skin tone, or identifying features.
- When the scanner detects an object, it highlights that area but does not show what the object is — the officer must investigate further.
- The scanner cannot see inside your body, through your skin, or detect internal medical devices.
- Different scanner types (millimeter-wave and backscatter) produce slightly different images, but both show only a generic silhouette.
- Images are not stored or recorded by TSA scanners at most U.S. airports — they appear on a monitor and disappear when you move through.
How millimeter-wave scanners work
Millimeter-wave scanners are the most common type at U.S. airports. They emit radio waves in the millimeter-wave frequency range, which bounce off your body and clothing. The waves are reflected back to sensors, which create an image based on how the waves return. Because radio waves do not penetrate skin, the scanner only detects objects on the surface of your body or hidden under clothing.
The image produced is a two-dimensional outline. If you have a phone in your pocket, a belt buckle, keys, or a metal underwire in a bra, those items will show up as highlighted spots on the silhouette. The officer sees the location of the object but not fine detail — they cannot read text on your phone or see the design of your belt.
Millimeter-wave scanners do not use ionizing radiation, so they do not carry the cancer risk associated with X-rays. They are considered safe for repeated exposure, which is why TSA uses them for routine screening.
Backscatter X-ray scanners and why they were phased out
Backscatter scanners, which used low-dose X-rays, were deployed at some U.S. airports between 2008 and 2013. These scanners worked by bouncing X-rays off your body and detecting the reflection. The image quality was higher than millimeter-wave, and officers could see more detail — including the outline of body shape and some surface features.
Backscatter scanners were controversial because they used ionizing radiation and produced images that some people felt were too detailed. Privacy advocates raised concerns, and independent scientists questioned whether the radiation dose was as low as TSA claimed. By 2013, TSA had removed all backscatter scanners from U.S. airports and replaced them with millimeter-wave technology.
If you traveled through a U.S. airport after 2013, you encountered a millimeter-wave scanner, not a backscatter unit. Some international airports still use backscatter technology, but the U.S. standard is now millimeter-wave only.
What happens when the scanner flags something
When the scanner detects an object, the officer does not automatically know what it is. The highlighted area on the screen tells the officer where to look, but not what to look for. The officer will either ask you to remove the item (if it is obvious, like a phone or keys) or perform a physical pat-down to determine what the object is.
Common items that trigger a flag include metal jewelry, underwire bras, thick belt buckles, coins in pockets, and electronic devices. Liquids, gels, and powders in carry-on bags are screened separately by X-ray machines at the checkpoint, not by body scanners.
If you know you have something that might flag the scanner — a medical device, a prosthetic, or an unusual piece of jewelry — tell the officer before you step into the scanner. This speeds up the process and prevents unnecessary pat-downs.
Data storage and privacy
TSA body scanners at most U.S. airports do not store or record images. The image appears on the officer's monitor, and when you step out of the scanner, the image is deleted. There is no database of body scanner images, and TSA does not retain them for later review or comparison.
However, the rules vary slightly by airport and scanner model. Some airports may have different policies, so if you have concerns about image storage, you can ask the officer before you enter the scanner. You also have the right to request a pat-down instead of using the scanner — this is a standard alternative screening method and does not delay your travel significantly.
TSA officers are trained not to discuss or share images, and they are not permitted to take photographs of the scanner screen. Violations of these rules are subject to disciplinary action.
Comparing scanner technology across airports
Most major U.S. airports use Rapiscan or L-3 millimeter-wave scanners, which are the two brands TSA has approved. Both produce similar silhouette images and use the same radio-wave technology. The main difference is in the speed and the exact shape of the outline, but from a privacy standpoint, they function the same way.
Some smaller airports or international airports may use different screening methods entirely — metal detectors, walk-through magnetometers, or manual pat-downs. If you are traveling internationally, the scanner technology may differ from what you are used to in the United States.
TSA has tested newer scanner technology that could provide higher-resolution images or faster screening, but as of now, millimeter-wave remains the standard. Any future changes to scanner technology would likely go through a public comment period before deployment.
What the scanner cannot detect
Body scanners cannot detect items hidden inside your body, such as swallowed objects or items concealed internally. They cannot see through dense materials like lead or thick metal. They cannot detect non-metallic items like ceramic knives, plastic explosives, or certain types of contraband that do not reflect radio waves or X-rays effectively.
This is why TSA uses multiple screening methods at the checkpoint: metal detectors, X-ray machines for bags, explosive trace detection, and physical pat-downs. No single scanner catches everything, so the combination of methods is designed to be more thorough than any one technology alone.
If you have questions about what a specific item will look like on a scanner, or whether a medical device will trigger screening, you can contact TSA in advance through their website or call the TSA Cares helpline.
Frequently Asked Questions
Can airport body scanners see through clothing?
Yes, millimeter-wave scanners can detect objects under clothing, but they cannot see your skin or body details. The image shows only a generic silhouette with highlighted areas where objects are detected. The scanner does not produce a photograph of your body underneath your clothes.
Do airport scanners use radiation?
Millimeter-wave scanners, which are standard at U.S. airports, use radio waves, not ionizing radiation. Backscatter scanners, which were phased out by 2013, used low-dose X-rays. If you are concerned about radiation exposure, millimeter-wave scanners pose no known health risk from routine screening.
What if I refuse to go through the body scanner?
You can request a pat-down instead of using the scanner. This is a standard alternative screening method and is not considered a violation or cause for suspicion. The pat-down takes a few extra minutes but allows you to proceed through security without using the scanner.
Are body scanner images stored or shared?
TSA does not store body scanner images at most U.S. airports. The image appears on the monitor and is deleted when you exit the scanner. Images are not recorded, archived, or shared with other agencies. If you have concerns about a specific airport's policy, you can ask the officer before screening.
Can the scanner detect medical implants?
Millimeter-wave scanners cannot see inside your body, so they cannot detect internal implants like pacemakers or artificial joints. However, metal implants may trigger a metal detector or cause the scanner to flag the area. Tell the officer about any medical devices before screening so they can use alternative methods if needed.