TSA scanners show a generic outline of your body, not your face or identifying details

The TSA uses two main types of scanners at airport checkpoints: millimeter wave machines and backscatter X-ray machines. Millimeter wave scanners, which are far more common, emit radio waves and detect how they bounce back off your body and clothing. The image they produce looks like a featureless human silhouette — no facial features, no skin texture, no identifying marks. A TSA officer in a separate booth views this outline and looks for objects hidden under clothing or in pockets.

Backscatter X-ray machines work differently but produce a similar result: a low-resolution image that shows the outline of your body and any dense objects you're carrying. The TSA phased out most backscatter machines after 2013 because millimeter wave technology was faster and raised fewer privacy concerns, though a small number remain in use at certain airports.

Neither scanner type can see inside your body, read your medical implants, or identify you as an individual. The image disappears from the system after the screening is complete — it is not stored, recorded, or transmitted anywhere.

Key Takeaways

  • Millimeter wave scanners create a generic body outline, not a photograph, and cannot show your face or any identifying features.
  • The scanner detects objects under clothing or in pockets by measuring how radio waves bounce off your body.
  • A TSA officer views the image in a separate booth and deletes it when ready after screening — no images are saved or stored.
  • You can request a pat-down search instead of going through the scanner if you prefer not to use it.
  • The scanner cannot detect internal objects, medical implants, or anything inside your body.

How the image is created and what it shows

Millimeter wave scanners work by emitting waves in the millimeter range of the electromagnetic spectrum — frequencies between microwave and infrared. These waves pass through most clothing and bounce off your skin and any objects you're carrying. The scanner's sensors detect the returning waves and convert them into a two-dimensional outline image.

The resulting image is intentionally low-detail. It shows the general shape of your body, the location of your arms and legs, and the presence of any bulky objects in your pockets, waistband, or shoes. It does not show your clothing texture, your skin, your hair, or anything that would let an officer identify you as a specific person. The image is grayscale and featureless — more like a heat map than a photograph.

If the scanner detects an object that needs closer inspection, the TSA officer will ask you to step aside for a pat-down or a physical search of your bag. The officer does not see the exact location of the object on the image — instead, the scanner highlights a general area of concern, and the officer uses that as a starting point.

What happens to the image after screening

The image is viewed by a TSA officer in a separate enclosed booth, not by the officer who checked your ID or boarding pass. The officer has about 10 seconds to review the image and decide whether to clear you or request additional screening. Once you move past the scanner, the image is deleted from the system.

TSA policy prohibits saving, storing, or transmitting scanner images. The only exception is for testing and training purposes, and even then the images are anonymized and kept separate from your identity. No database of scanner images exists, and no image is linked to your name, ticket number, or any other personal information.

If you travel frequently, each trip produces a new image that is discarded after that screening. The TSA does not build a file of your body or track how you look over time.

Why the scanner cannot see certain things

Millimeter wave scanners cannot penetrate solid objects or see inside your body. They detect the surface of your skin and the outer surface of items you're carrying — a wallet in your pocket, a phone in your hand, a belt buckle. They cannot see inside a closed suitcase, inside your stomach, or through dense metal objects.

Medical implants like pacemakers, insulin pumps, or metal joints do not show up as identifying information on the scanner. The scanner may detect that a dense object is present in that area of your body, but it cannot read what the object is or access any information stored on it. If you have a medical implant, you can inform the TSA officer before screening, and they will conduct a pat-down instead.

The scanner also cannot detect liquids, powders, or gases unless they are in a container dense enough to show up as an outline. This is why the TSA still requires you to remove liquids from your bag — the scanner alone cannot verify that a bottle contains only water.

Your right to refuse the scanner

You can decline to go through the scanner and request a pat-down search instead. This is a standard TSA procedure, and officers are trained to accommodate the request without delay or additional scrutiny. Tell the officer "I'd like to opt out" before you step into the scanner.

A pat-down involves an officer running their hands over your body, including your legs, torso, and arms, to detect any objects you might be carrying. The officer wears gloves and follows a standardized procedure. You can request an officer of the same gender, and you can have a companion present during the search.

Opting out does not flag you for additional screening or put you on any list. It straightforward means you will spend a few extra minutes at the checkpoint while the pat-down is conducted. The choice is yours at every screening.

Differences between scanner types

Millimeter wave scanners are the standard at most U.S. airports. They are fast — the screening takes about 10 seconds — and they produce the generic outline image described above. The technology has been in use since 2010 and is considered safe by the TSA and the FDA.

Backscatter X-ray machines use a different technology: they emit a low-dose X-ray beam and detect the radiation that bounces back. The image produced is similar to the millimeter wave image — a body outline with no identifying details — but the screening takes slightly longer. The TSA removed most backscatter machines from service because millimeter wave technology was faster and because public concern about X-ray exposure was higher, even though the radiation dose is extremely low.

A small number of backscatter machines remain in use at certain airports, particularly in high-traffic locations. If you encounter one, the privacy and image-deletion rules are the same as for millimeter wave scanners.

What officers are trained to look for

TSA officers are trained to spot objects that could be weapons or pose a security threat: guns, knives, explosives, or components of explosives. They are not looking at your body or your appearance — they are looking at the outline of objects you are carrying.

If the scanner detects an object of concern, the officer will ask you to step aside. You will be asked to empty your pockets, remove your shoes, or open your bag so the officer can physically inspect the item. This is where the actual identification happens — the officer sees the object itself, not just its outline on the scanner.

Officers are instructed not to make assumptions about you based on your appearance, clothing, or the scanner image. Their job is to identify objects, not to profile passengers.

Frequently Asked Questions

Can the TSA see my underwear or intimate body parts?

No. The scanner shows a generic outline of your body shape, not your clothing or skin. It cannot distinguish between different types of clothing or show any detail of your body. The image looks like a featureless silhouette, similar to a store mannequin.

Is the radiation from the scanner harmful?

Millimeter wave scanners do not use ionizing radiation and pose no health risk. Backscatter X-ray machines do use X-rays, but the dose is extremely low — the TSA estimates it is equivalent to about two minutes of natural background radiation. The FDA and TSA have both determined that the machines are safe for regular use.

What if I have a medical implant or a prosthetic?

Tell the TSA officer before you go through the scanner. You can request a pat-down instead, and the officer will conduct the search without requiring you to remove or expose the implant. You do not need to provide medical documentation unless the officer asks.

Can the TSA officer see my face on the scanner image?

No. The scanner image does not include facial features, hair texture, or any identifying details. The officer cannot tell who you are from the image alone — they would need to see your ID for that.

Are scanner images stored or shared with other agencies?

No. TSA policy prohibits storing or transmitting scanner images. The image is deleted after screening and is not shared with law enforcement, immigration, or any other agency. The only exception is for internal testing and training, and those images are anonymized.