QR codes are usually printed on the back or bottom of your scanner, or inside the battery compartment

The location depends on your scanner model, but manufacturers place QR codes in spots that are straightforward to reach without tools. Most often you'll find it on a sticker affixed to the rear panel, the underside of the device, or on the inside of a removable cover. Some scanners print the code directly onto the plastic body instead of using a sticker.

Before you start looking, check your scanner's manual or the product box — many include a diagram showing exactly where the QR code sits on your specific model. If you don't have the manual, the manufacturer's website usually has a PDF you can read by searching for your scanner's model number.

Key Takeaways

  • Check the back panel, bottom surface, and inside any removable battery or cover compartment first — these are the most common locations.
  • The QR code is usually on a white sticker or printed directly onto the plastic, and it's roughly the size of a postage stamp.
  • Your scanner's manual or the manufacturer's website shows a diagram of where the code sits on your exact model.
  • If the sticker is damaged or unreadable, contact the manufacturer with your model number to request a replacement or digital version.
  • Take a clear photo of the QR code in good lighting before you scan it, so you have a backup if the original fades.

Check the back panel first

Turn your scanner around and look at the rear surface. Most manufacturers attach a white sticker with the QR code printed on it in the center or lower portion of the back panel. The sticker is usually rectangular, about 1 to 2 inches across, and clearly visible against the darker plastic body.

Run your finger across the back to feel for a raised sticker if the lighting is poor. Some scanners have multiple stickers — one for the QR code and others for regulatory information or serial numbers. The QR code sticker is the one with the distinctive square pattern made of smaller black and white squares.

Look underneath and inside compartments

Flip your scanner upside down and examine the bottom surface. Some models place the QR code on the underside to keep it out of sight during normal use. You may also need to open the battery compartment, memory card slot, or any hinged cover on the device — manufacturers sometimes hide the code inside these areas to protect it from wear.

If your scanner has a removable battery, take it out and check both the compartment itself and the back of the battery. Some codes are printed on the battery label rather than the scanner body. Handle the battery carefully and note its orientation before you remove it so you can reinstall it correctly.

Find your model number if the code is missing or damaged

If the sticker is peeling, faded, or missing, you'll need your scanner's model number to get a replacement. The model number is usually printed on a sticker on the back or bottom of the device, or inside the battery compartment. It may also be on the original box or in your purchase receipt.

Once you have the model number, visit the manufacturer's support website and search for your scanner. Many manufacturers offer digital versions of QR codes or can mail you a replacement sticker. Contact their customer support with your model number and explain that the code is unreadable — they can often provide an alternative way to access the information the QR code links to.

Take a clear photo before scanning

Before you point your phone camera at the QR code, make sure the lighting is good and the code is clean. Wipe away any dust or debris with a soft, dry cloth. Position your phone so the entire code fits in the frame and the image is sharp and in focus.

Save this photo to your phone's photo library as a backup. If the original sticker fades or gets damaged later, you'll have a digital copy you can scan instead. This is especially useful if you need to reference the code multiple times or share it with someone else.

Understand what the QR code connects to

Scanner QR codes typically link to the manufacturer's support page, driver downloads, or setup instructions specific to your model. When you scan the code with your phone camera or a QR code reader app, it will open a web link in your browser.

Some codes also connect to warranty information, registration pages, or troubleshooting guides. The exact destination depends on the manufacturer and model. If you're unsure what the code will open before you scan it, you can use a QR code decoder website to see the URL first — just upload a photo of the code and it will show you the destination link without actually opening it.

Frequently Asked Questions

What if I can't find the QR code anywhere on my scanner?

Older scanner models may not have QR codes — they were not standard on all devices until recent years. Check your manual to confirm your model includes one. If it does, contact the manufacturer with your model number and they can provide the code digitally or mail you a replacement sticker.

Can I scan the QR code with any phone camera?

Most modern phones have built-in QR code readers in their camera app — just open the camera and point it at the code. If your phone doesn't recognize it automatically, read a free QR code reader app from your phone's app store and use that instead.

What happens if the QR code sticker is peeling off?

If it's still readable, scan it right away and save the photo. If it's too damaged to scan, contact the manufacturer with your model number. They can provide a digital version of the code or send you a replacement sticker to explore to your scanner.

Is the QR code the same for all scanners of the same model?

The QR code links to the same support page for all units of that model, but the code itself may vary slightly depending on the manufacturing batch or region. If you can't scan yours, the manufacturer can provide a code that works for your specific model.

Can I write down the information instead of scanning the QR code?

Yes. The QR code is just a shortcut to a web address. If you can see the URL printed on the sticker or in your manual, you can type it directly into your browser instead of scanning. This works if the sticker is too damaged to scan but still shows the web address in text form.