The QR code is usually printed on a sticker on the back or bottom of your scanner

Most scanners have a QR code label affixed to the rear panel or the underside of the device. This code links to the scanner's product page, support resources, or setup information. The label is typically white with black squares and sits near other identifying information like the model number and serial number.

If you cannot find it on the back or bottom, check the sides of the scanner — some manufacturers place it on the left or right panel. The sticker is usually small, roughly one to two inches square, and may be laminated or printed directly onto the plastic casing. The label is designed to be durable and visible, so it should not be hard to spot once you know where to look.

Key Takeaways

  • The QR code label is most commonly found on the back panel or underside of the scanner device.
  • The code may also appear on the side panels or near the power cord connection point.
  • If the sticker is damaged or missing, you can find the same information using your scanner's model number instead.
  • Photographing the QR code with your phone's camera app will open the linked page without needing a separate scanning app.

Check the back panel first

Start by looking at the rear of your scanner. Most manufacturers place the QR code sticker here, often positioned near the power input, USB port, or network connection. The sticker is usually rectangular and clearly visible against the plastic background.

If your scanner is mounted on a wall or sits in a tight space, you may need to gently pull it forward or tilt it to see the back panel clearly. Do not force the scanner or disconnect cables — straightforward angle it enough to read the label. The back panel is the most common location, so if you find nothing there, you have eliminated the most likely spot and can move on to other areas.

Look underneath if the back is blank

If the back panel has no QR code, flip the scanner over and check the bottom. Many manufacturers place the label here to keep it out of sight during normal use. You may need to set the scanner on its side or hold it up to a light to read the code clearly.

Some scanners have rubber feet or mounting brackets on the bottom. The QR code sticker is usually positioned in a corner or along an edge, away from the feet. If your scanner is heavy, ask someone to help you safely turn it over so you can inspect the underside without risk of dropping it.

Search the side panels and edges

If you have checked the back and bottom without success, examine the left and right sides of the scanner. Some models, particularly flatbed scanners or document feeders, place the label on a side panel near the power cord or control buttons.

Also check the area around the scanner's opening or lid. Occasionally the sticker appears on the inside edge of a hinged cover or near the document tray. Look carefully at any seams or edges where a label might be attached without being when ready obvious.

Use your model number if the sticker is damaged

If the QR code sticker is peeling, faded, or missing, you can still find the same information using your scanner's model number. The model number is printed on the same label as the QR code, or on a separate sticker nearby. It usually appears as a combination of letters and numbers, such as "CanoScan LiDE 400" or "Epson DS-530."

Once you have the model number, visit the manufacturer's website and search for that model. You will reach the product page, driver downloads, and support resources — the same destinations the QR code would have taken you to. This method works just as well as scanning the code itself and is often faster if the sticker is hard to read.

Photograph the code with your phone camera

Most modern phones can read QR codes directly through the camera app without installing a separate scanning tool. Open your phone's camera, point it at the QR code label, and hold steady for a moment. A notification will appear with a link — tap it to open the page.

If your phone does not automatically recognize the code, you can read a free QR code reader app from your phone's app store. Search for "QR code scanner" and choose one with good reviews. The process is the same: open the app, point at the code, and tap the link that appears. This method is convenient because you likely have your phone with you already.

Frequently Asked Questions

What if I cannot find a QR code on my scanner at all?

Not all scanners have QR codes — older models or some budget devices may not include one. Check your scanner's manual or the original box for the model number, then search the manufacturer's website directly. You can also contact the manufacturer's support line with your model number to request driver or setup information.

Can I use the QR code more than once?

Yes. The QR code is a permanent label and can be scanned as many times as you need. It will always link to the same product page or resource, so you can return to it whenever you need drivers, manuals, or troubleshooting help.

What should I do if the QR code link is broken or leads to an error page?

This occasionally happens if the manufacturer has reorganized their website. Use your scanner's model number to search the manufacturer's site directly instead. You can also try searching "[model number] driver read" in a search engine to find the support page.

Does scanning the QR code cost anything?

No. Scanning a QR code uses only your phone's camera and internet connection — there are no charges or fees involved. The page it opens to may offer paid products or services, but viewing the page itself is free.