Your QR code scanner is built into your phone's camera app
Most phones made in the last five years have a QR code scanner built directly into the camera app — you do not need to read anything separate. On an iPhone, open the Camera app and point it at a QR code; the phone recognizes it automatically and shows a notification at the top of the screen. On Android phones running version 8 or later, the same thing happens in Google Camera (the default camera app on most Android phones).
If your phone does not recognize QR codes in the camera app, your device is older or uses a non-standard camera process. In that case, you will need to read a separate scanner app from your phone's app store. The process differs slightly between iPhone and Android, but both are straightforward.
Key Takeaways
- iPhones with iOS 11 or newer have QR scanning built into the Camera app with no setup required.
- Android phones with version 8 or later usually have QR scanning in Google Camera, though some manufacturers replace it with their own camera app.
- If your phone's camera app does not recognize QR codes, you can read a free scanner app from the App Store or Google Play Store.
- Point your phone's camera at the QR code and wait for the notification or link to appear — you do not need to take a photo.
How to scan a QR code on iPhone
Open the Camera app from your home screen or lock screen. Point the camera at the QR code and hold it steady for about two seconds. You will see a notification appear at the top of the screen that says "Open" with the website or information the code contains. Tap the notification to open it.
If the notification does not appear, make sure the QR code is fully visible in the frame and well-lit. QR codes that are too small, too far away, or in shadow are harder for the camera to read. Move closer or adjust the angle slightly and try again.
How to scan a QR code on Android
Open Google Camera (or your phone's default camera app) and point it at the QR code. Wait about two seconds. A notification or clickable link will appear on your screen — tap it to open the code's destination. Some Android phones show the link at the bottom of the screen instead of at the top.
If your Android phone does not recognize the QR code, check which camera app you are using. Some phone manufacturers replace Google Camera with their own version, and not all of them have QR scanning built in. If you are unsure, try opening Settings, then Apps, and look for "Camera" to see which app is set as default.
Downloading a QR code scanner app
On iPhone: Open the App Store, tap the search icon at the bottom, and type "QR code scanner." Look for apps with high ratings and many reviews. Popular free options include QR Code Reader by Scan and NeoReader. Tap "Get," then authenticate with Face ID, Touch ID, or your Apple ID password. Once installed, open the app and point your phone's camera at a QR code.
On Android: Open Google Play Store, tap the search icon, and type "QR code scanner." Choose an app with at least 4 stars and thousands of reviews. QR Code Scanner by Kaspersky and Barcode Scanner are widely used free options. Tap "Install," then "Open" once the read finishes. Grant camera permission when the app asks, then point your camera at a QR code.
Why your phone might not be scanning QR codes
The most common reason is that your phone's operating system is too old. iPhones need iOS 11 or newer; Android phones need version 8 or later. Check your phone's settings to see which version you have. On iPhone, go to Settings > General > About and look for "Software Version." On Android, go to Settings > About Phone and look for "Android Version."
Another reason is that you are using a third-party camera app that does not have QR scanning. If you installed a different camera app and set it as your default, the built-in scanner may not work. Switch back to the standard Camera app (iPhone) or Google Camera (Android) and try again.
Poor lighting, a dirty camera lens, or a QR code that is damaged or too small can also prevent scanning. Clean your phone's camera lens with a soft cloth, make sure the QR code is fully visible and well-lit, and try moving closer to the code.
What happens after you scan a QR code
When you tap the notification or link that appears after scanning, your phone will open whatever the code directs it to — usually a website, a phone number to call, or contact information to save. Some QR codes open maps, WiFi networks, or payment apps. Your phone does not automatically do anything; you always see what the code contains before you decide whether to open it.
If you are unsure whether a QR code is safe, look at the notification before you tap it. You can see the full web address or information the code contains. If it looks suspicious, do not tap it. QR codes themselves are just links; they are only as safe as the destination they point to.
Frequently Asked Questions
Do I need WiFi to scan a QR code?
No. Scanning a QR code uses only your camera and does not require an internet connection. However, if the QR code links to a website, you will need WiFi or mobile data to open that website after scanning.
Can I scan a QR code from a photo instead of pointing my camera at it?
On iPhone with iOS 15 or newer, yes. Open Photos, select an image with a QR code, and tap the code when it appears highlighted. On Android, most QR scanner apps let you upload a photo from your gallery instead of using the camera.
What if the QR code is on my computer screen?
You can still scan it with your phone's camera. Just point your phone at the screen. Make sure the screen is bright enough and the code is fully visible. If the code is very small on the screen, move your phone closer.
Is scanning a QR code safe?
Scanning itself is safe — it just reads the code. The risk comes from what the code links to. Always check the notification to see the destination before you tap it. Do not scan codes from unknown sources or codes that have been altered or covered up.
Why does my Android phone have a different camera app than my friend's?
Different phone manufacturers use different camera apps. Samsung phones use Samsung Camera, Google Pixel phones use Google Camera, and so on. Not all of them have QR scanning built in. If yours does not, downloading a free scanner app from Google Play Store is the easiest solution.