The QR code is usually on a sticker inside the appliance or on the back panel
Most modern appliances have a QR code printed on a white or silver sticker. The exact location depends on the appliance type, but manufacturers place them where they are visible during normal use or maintenance — not hidden where you would need tools to access them.
For refrigerators, freezers, and dishwashers, check the inside wall of the fridge or freezer compartment, usually on the left or right side. On top-load washing machines, lift the lid and look on the inner wall or the underside of the lid itself. Front-load washers and dryers typically have the sticker on the inside of the door frame or on the back panel near the bottom.
If you cannot find it in those spots, the back of the appliance is your next stop. Unplug the unit first if you are moving it, then look for a sticker on the rear panel. Some manufacturers also place QR codes on the side panels or on the underside of the unit.
Key Takeaways
- The QR code is printed on a sticker, usually white or silver, and is meant to be visible without disassembly.
- For refrigerators and freezers, check the interior walls; for washers and dryers, check the door frame or back panel.
- The back panel of any appliance is a common secondary location if you do not find it in the primary spots.
- If the sticker is damaged or missing, the model and serial number on the appliance itself can often be used instead.
Check the interior first — it is the fastest place to look
Start your search inside the appliance because the sticker is usually placed where it will not get wet or worn down by external weather. Open the door or lid and scan the interior walls carefully. The sticker is typically small — about the size of a postage stamp — and printed in black and white.
On refrigerators, look on the side walls of the fresh food section or freezer compartment. Some manufacturers place it on the ceiling of the fridge. On dishwashers, check the inside of the door and along the top edge of the tub. On ovens, the sticker may be on the interior side wall or on the frame around the door opening.
Use a flashlight if the interior is dim. Do not force anything open or remove any parts — if you cannot see the sticker easily, it is probably not there, and you should move to the next location.
Look on the back panel and side panels if the interior is empty
If the interior search turns up nothing, move the appliance away from the wall carefully and check the back panel. This is where manufacturers often place QR codes on units that sit against a wall during normal use. The sticker will be on the metal or plastic backing, usually in the lower half of the panel.
Side panels are less common but worth checking, especially on larger appliances like refrigerators or range hoods. Some units also have stickers on the bottom or underside, though you may need to tilt or partially move the appliance to see them safely.
If you are moving the appliance anyway for maintenance or repair, this is a good time to photograph the back panel so you have the QR code image saved on your phone for future reference.
Check the door frame and hinges on washers, dryers, and ovens
On front-loading appliances, the QR code often sits on the inside edge of the door frame — the area you see when the door is open but before you look inside the tub or cavity. Run your finger along the frame where the door seals. The sticker may be on the left or right side.
On some models, the code is on the hinge side of the door or on the metal bracket that holds the hinge. This placement keeps it out of the way of water spray and regular cleaning. If you do not see it on the frame itself, check the small metal or plastic plate near the hinges.
For ovens and ranges, also check the frame around the oven opening and the area where the door latch sits. Manufacturers vary in placement, so if one spot is empty, the next logical spot is usually nearby.
Photograph the sticker once you find it
Once you locate the QR code, take a clear photo of it with your phone. Make sure the entire code is in the frame and the image is sharp enough to scan. Store this photo in a folder on your phone or in your cloud storage so you have it whenever you need to scan again.
This is especially useful if the sticker fades, peels, or becomes damaged over time. A digital copy means you can scan it months or years later without having to hunt for the physical sticker again.
Use the model and serial number if the sticker is missing or damaged
If the QR code sticker is worn, peeled, or missing entirely, you can still find the information you need using the model and serial number. These are printed on a separate sticker or metal plate, usually located near the QR code or on the back panel.
Write down both the model number and serial number, then enter them into the manufacturer's website or use them to search for the appliance manual online. Many manufacturers index their documentation by model number, so you can often find the same information that the QR code would have linked to.
If you are unable to locate either sticker, check the original purchase paperwork or warranty documents — they usually list the model number. You can also contact the manufacturer's customer service line with the appliance type and any visible information, and they can help you locate the documentation you need.
Frequently Asked Questions
What does the QR code link to?
The QR code typically links to the manufacturer's product page, user manual, or parts diagram for that specific model. Scanning it with your phone camera or a QR code reader app will open a webpage with information about maintenance, troubleshooting, and how the appliance works.
Can I scan the QR code with my phone camera?
Yes. Most modern smartphones have a built-in QR code scanner in the camera app. Open your camera, point it at the code, and a notification will appear with a link. Tap it to open the page. If your phone does not have this feature, you can read a free QR code reader app from your phone's app store.
What if the QR code sticker is under the appliance where I cannot reach it?
If the sticker is on the underside and you cannot safely move the appliance, use the model and serial number instead. These are always on an accessible sticker or plate. The manufacturer's website can help you find the same information without needing the QR code.
Is the QR code the same on all models from the same brand?
No. Each model has its own QR code that links to documentation specific to that unit. The code encodes the model number and sometimes the serial number, so scanning different appliances from the same brand will take you to different product pages.
Can I write down the QR code instead of scanning it?
The QR code itself is not a number you can write down — it is a visual pattern. However, you can photograph it, or you can write down the model and serial number printed nearby and use those to find the same information on the manufacturer's website.