Remove items from your pockets and put them in a bin or tray before you reach the scanner

Before you walk through a metal detector or body scanner, you need to empty your pockets and remove metal objects from your body. The scanner operator will direct you to a bin, tray, or designated table where you place these items. This happens in a separate step before you enter the scanner itself — you do not carry anything through.

The reason is straightforward: metal and some other materials trigger the scanner's sensors, which means you would have to turn back and remove the item anyway. Placing everything in advance saves time and avoids the awkward moment of setting off an alarm mid-scan.

Key Takeaways

  • Empty your pockets completely and place all contents in a bin or tray before approaching the scanner.
  • Remove metal items including keys, coins, belt buckles, and jewelry; some scanners also flag thick watches and metal-framed glasses.
  • Keep your ID and documents with you unless the operator tells you to place them in the bin.
  • If you wear a medical device like a pacemaker or insulin pump, tell the operator before you reach the scanner — you may be screened differently.
  • The bin moves through the scanner on a conveyor belt after you walk through, so your items are scanned separately and you collect them on the other side.

What goes in the bin: metals and electronics

Place your keys, coins, phone, and wallet in the bin. Remove your belt if it has a metal buckle. Take off your watch, rings, and any other jewelry. Metal-framed glasses sometimes trigger sensors, so if you wear them, ask the operator whether to remove them or leave them on.

Larger items like laptops, tablets, and liquids in containers larger than 3.4 ounces (100 milliliters) go in the bin too, though the rules vary depending on whether you are at an airport, courthouse, or other facility. The operator will tell you what to do with these items when you arrive at the checkpoint.

What you can keep on you

You can usually keep your ID in your hand or in a pocket until the operator asks for it. Some facilities want you to place it in the bin; others want you to hold it out for inspection. Ask if you are unsure.

Clothing stays on unless the operator tells you otherwise. Shoes normally stay on at most scanners, though some facilities ask you to remove them. Again, the operator will give you these instructions as you approach.

How the bin moves through the scanner

After you place your items in the bin, the operator places it on a conveyor belt. The belt carries the bin through an X-ray machine while you walk through the metal detector or body scanner in a separate lane. This means your items are scanned at the same time you are, but in a different machine.

Once you exit the scanner, you collect your bin from the conveyor belt on the other side. Check that everything is there before you move on. If something is missing or the operator has flagged an item for inspection, they will tell you at that point.

If you have a medical device or implant

Tell the operator before you reach the scanner if you have a pacemaker, insulin pump, metal joint replacement, or other implanted medical device. Some devices are safe to walk through metal detectors; others are not. Some body scanners use millimeter-wave technology, which is safe for most implants, while others use backscatter X-rays, which may not be.

The operator can tell you whether your device is safe for that particular scanner. If it is not, you will be screened using a pat-down instead, which takes a few extra minutes but is a normal alternative. Do not try to hide a medical device — the scanner will detect it anyway, and telling the operator in advance prevents confusion and delays.

Bags and larger items

Place your bag, backpack, or purse in the bin along with your smaller items, or on the conveyor belt if the bin is full. If your bag is very large, the operator may ask you to place it directly on the belt instead of in a bin. Follow their direction.

Coats and jackets usually go in the bin too, unless you are wearing a very heavy winter coat, in which case the operator may ask you to remove it and place it separately on the conveyor belt. Again, they will tell you what to do.

What happens if you forget something in your pocket

If you walk through the scanner and an alarm sounds, you will be asked to step back and remove the item you missed. This is not a problem — it happens regularly. straightforward return to the bin area, remove the item, place it in the bin, and go through again. The process takes an extra minute or two, but there is no penalty.

If the operator is unsure what triggered the alarm, they may ask you to empty your pockets completely or perform a pat-down search. This is a standard security procedure and is not a sign that you have done anything wrong.

Frequently Asked Questions

Do I have to remove my shoes?

Most scanners do not require you to remove your shoes, but some do. The operator will tell you at the checkpoint. If you are unsure, ask before you reach the bin area so you can plan accordingly.

What if I have a lot of items and the bin is too small?

Ask the operator for a second bin or a larger one. They have extras available. Do not try to cram everything into one bin — items can fall out on the conveyor belt, which slows down the line.

Can I keep my phone in my pocket?

No. Phones contain metal and electronics that trigger scanners. Place it in the bin before you approach the scanner. You will get it back on the other side within seconds.

What if the scanner flags my item for inspection?

The operator will remove it from the bin and may open it, swab it, or scan it again with a handheld device. This usually takes a minute or two. Stay nearby so you can collect it once they have finished.

Do I need to remove my glasses?

Plastic-framed glasses usually do not trigger scanners and can stay on. Metal-framed glasses sometimes do. If you are unsure, remove them and place them in the bin — it takes two seconds and avoids a second pass through the scanner.