Most smartwatches are water-resistant, not waterproof — and the difference matters

Your smartwatch is probably not waterproof in the way a submarine is waterproof. What manufacturers call "waterproof" is actually water resistance, which means it can handle splashes, sweat, and brief submersion but will fail if you push it too far. The rating on your watch tells you exactly how much water exposure it can take before water seeps inside and damages the electronics.

The key is understanding the number stamped on your watch or in its manual — usually written as "5 ATM" or "50m" or "IP68". That number is not a suggestion or a marketing claim. It is a tested limit. Exceed it, and water gets in. Your warranty will not cover it.

Key Takeaways

  • Water resistance ratings like 3 ATM, 5 ATM, and 10 ATM tell you the maximum depth and duration your watch can handle, and they are not interchangeable.
  • ATM (atmospheres) and meters are two different rating systems that measure the same thing, and a watch rated 5 ATM can handle about 50 meters of depth in a lab test, not real-world swimming.
  • Saltwater, chlorine, and hot water damage watches faster than fresh water, even if the watch meets the rating for that depth.
  • Seals and gaskets degrade over time, so a watch that was water-resistant when new may not be after two years of daily wear.
  • If your watch gets wet and stops working, the damage is usually permanent and not covered by warranty.

How water resistance ratings actually work

The number on your smartwatch comes from a lab test, not real-world conditions. A watch rated 5 ATM sits in a tank of still, fresh water at a depth of 50 meters for 30 minutes. It does not move. It does not get splashed. It does not encounter waves or pressure changes.

When you swim or shower, your watch experiences forces the lab test does not simulate. Movement pushes water against the seals. Temperature changes make the materials expand and contract. Soap, shampoo, and chlorine eat away at the gaskets that keep water out. A watch that passes the 5 ATM test in a lab may fail in your shower because the conditions are not the same.

This is why manufacturers include a disclaimer in the fine print: water resistance is not permanent. The gaskets and seals that create the barrier between water and electronics wear out. A watch that was water-resistant at purchase may not be after a year of daily wear, sweat, and temperature changes.

What each rating means in practice

Most smartwatches fall into one of four categories. A watch rated 3 ATM (30m) can handle splashes and brief accidental submersion — think washing your hands or getting caught in light rain. It is not safe for swimming or showering. A 5 ATM (50m) watch can handle showering and brief swimming in a pool, but not diving or snorkeling. A 10 ATM (100m) watch is safe for swimming and snorkeling but not diving. A 20 ATM (200m) watch is rated for diving, though most smartwatches do not reach this level.

The gap between ratings is not small. A 3 ATM watch and a 5 ATM watch look identical, but one will fail in your shower and the other will not. Check your manual or the manufacturer's website to find your exact rating. If you cannot find it, assume your watch is 3 ATM and keep it away from water beyond splashes.

Why saltwater and chemicals damage watches faster

Fresh water is gentler on seals than saltwater or chlorinated water. Salt corrodes the metal parts inside your watch — the contacts, springs, and circuit board traces. Chlorine breaks down the rubber and plastic gaskets that seal the case. Hot water from a shower or bath accelerates both processes. A watch rated 5 ATM for fresh water may fail after one chlorinated pool session because the chemical attack is faster than the seal can withstand.

If you wear your watch in saltwater or a chlorinated pool, rinse it with fresh water when ready afterward. Do not wait. The longer salt or chlorine sits on the watch, the more damage it does. Even a quick rinse under a tap helps. Better still, remove the watch before entering the water if you know it will be exposed to chemicals.

How to tell if your watch has water damage

Water inside a smartwatch usually shows up as condensation under the screen first — a foggy or cloudy appearance that does not go away. You may also see droplets of water visible inside the case. If the screen fogs up after water exposure, the seal has failed and water is inside. Do not try to dry it out by leaving it in the sun or in rice. The water is already in contact with the electronics.

Once water is inside, corrosion begins when ready. The watch may still turn on and appear to work, but the damage is happening. Within days or weeks, the corroded circuits will fail. The battery may swell. The screen may stop responding. At that point, the watch is not repairable — most manufacturers do not repair water-damaged devices, and the cost of replacement parts exceeds the cost of a new watch.

Seals wear out — get yours checked if your watch is older

The gaskets and seals that make your watch water-resistant are made of rubber or silicone. Every time you expose your watch to temperature changes, humidity, or water, these materials flex and compress. Over time, they lose their ability to create a tight seal. A watch that was water-resistant at purchase may not be after two years of daily wear.

Some manufacturers offer re-sealing services — taking the watch apart, replacing the gaskets, and reassembling it. This is not common for smartwatches because the cost is high and the watches are not designed for straightforward disassembly. Before you pay for a re-seal, check whether the manufacturer offers it and what it costs. For most people, it is cheaper to replace the watch.

If your smartwatch is more than two years old and you want to keep wearing it in water, contact the manufacturer and ask whether re-sealing is an option. If not, treat it as a 3 ATM watch from that point forward — avoid water beyond splashes.

What to do if your watch gets wet

If your watch gets wet beyond its rating, turn it off when ready if you can. Do not try to charge it or connect it to your phone. Do not press the buttons. Let it dry completely in a warm, dry place for at least 48 hours before turning it back on. Do not use heat — a hair dryer or oven will damage the screen and battery.

If the watch was submerged in saltwater, rinse it with fresh water first, then let it dry. If you see condensation under the screen or water droplets inside the case, the seal has failed. Drying it out may temporarily clear the fog, but the damage is done. The watch will likely fail within weeks.

Once the watch has dried, turn it on and test it. If it works, back up any data stored on it when ready. Do not assume it is fixed. Water damage is progressive — the watch may work today and fail tomorrow as corrosion spreads. If it does not turn on, do not keep trying. Contact the manufacturer to ask about repair or replacement options, but be prepared for the answer that water damage is not covered by warranty.

Frequently Asked Questions

Can I wear my smartwatch in the shower?

Only if it is rated 5 ATM or higher. A 3 ATM watch is not safe for showers because the combination of hot water, steam, and pressure from the spray can force water past the seals. Check your manual for the exact rating. If you do not know it, assume 3 ATM and keep the watch out of the shower.

Is my smartwatch safe for swimming?

A 5 ATM watch can handle brief swimming in a pool, but not diving or extended time underwater. A 10 ATM watch is safer for swimming. Do not wear a 3 ATM watch while swimming. Avoid chlorinated pools if possible — rinse the watch with fresh water when ready after if you do swim in chlorine.

What does IP68 mean on a smartwatch?

IP68 is a different rating system than ATM. The "6" means dust-tight, and the "8" means the watch can handle continuous submersion in water deeper than 1 meter. An IP68 watch is usually equivalent to a 5 ATM watch, but check the manufacturer's specifications to be sure. The two systems measure different things and are not directly comparable.

Can I get my smartwatch repaired if water gets inside?

Most manufacturers do not repair water-damaged smartwatches. Water damage is typically not covered by warranty because it is considered user error — the watch was exposed to water beyond its rating or the seals had already degraded. Check your warranty and contact the manufacturer, but be prepared for a replacement cost rather than a repair.

How long does water resistance last on a smartwatch?

The seals that create water resistance degrade over time. A watch that was water-resistant when new may lose that protection after one to three years of daily wear, depending on how often it is exposed to water and temperature changes. If your watch is older than two years and you want to use it in water, treat it as having a lower rating than it originally had.