The fastest way to connect a JBL soundbar to your TV
Most JBL soundbars connect via HDMI, optical cable, or Bluetooth — in that order of preference. HDMI gives you the best sound quality and lets the soundbar control your TV's volume with your remote. Optical cable is the second choice if your TV has an optical port but limited HDMI inputs. Bluetooth works but often introduces lag between picture and sound, making it the last resort.
Start by checking what ports your TV has on the back or side. Look for HDMI ports (rectangular slots), an optical port (a small round opening with a plastic cover), or confirm your TV supports Bluetooth. Then check your JBL soundbar's manual or the back panel to see which connection types it supports. Most current JBL models support all three, but older ones may not have Bluetooth.
Key Takeaways
- HDMI is the best connection method because it carries both audio and video, supports the soundbar remote control, and delivers the highest sound quality.
- If your TV has limited HDMI ports, use an optical cable instead — it carries high-quality audio and works with nearly all TVs made in the last ten years.
- Bluetooth works but often causes a delay between what you see and what you hear, so use it only if HDMI and optical are not available.
- You may need to change your TV's audio output settings after connecting to tell it to send sound to the soundbar instead of its built-in speakers.
Connecting via HDMI (the best option)
HDMI is the preferred method because it carries both audio and video through one cable, supports remote control of the soundbar's volume, and delivers the clearest sound. Most JBL soundbars have at least one HDMI input port on the back.
Plug one end of an HDMI cable into the HDMI output port on your TV and the other end into the HDMI input on your soundbar. If your soundbar has an HDMI output port as well, you can run a second HDMI cable from that output back to your TV — this setup lets the soundbar act as a pass-through and gives you more control. Turn on both devices. Your TV should automatically detect the soundbar, but if it does not, go to your TV's settings menu, find the audio or sound output section, and select the soundbar from the list.
If your TV has only one HDMI port and you need it for another device like a streaming box or gaming console, use an HDMI splitter or switch instead. These devices let you plug multiple HDMI cables into one port and switch between them with a button or remote.
Connecting via optical cable (if HDMI is not available)
An optical cable carries digital audio from your TV to the soundbar. It works with almost every TV made in the last decade and is often the second-best choice when HDMI ports are full or your soundbar does not have HDMI input.
Locate the optical port on the back of your TV — it is a small round opening, usually labeled "Optical Out" or "TOSLINK". Remove the plastic cover if there is one. Plug one end of an optical cable into that port and the other end into the optical input on your soundbar. Turn on both devices.
Go to your TV's settings menu and find the audio or sound output section. Look for an option that says "Optical" or "Digital Audio Out" and select it. Your TV will now send sound to the soundbar instead of its built-in speakers. If you do not see this option, your TV may be set to send audio through HDMI by default — look for a setting called "HDMI Audio Out" or "Audio Output" and change it to optical.
Connecting via Bluetooth (when other options are not available)
Bluetooth is wireless but slower than wired connections, which can cause the sound to lag behind the picture on your screen. Use this method only if your TV and soundbar both support Bluetooth and you cannot use HDMI or optical.
On your JBL soundbar, press and hold the Bluetooth button (usually marked with a Bluetooth symbol) until you see a light blink or hear a tone indicating the soundbar is in pairing mode. On your TV, go to settings, find the Bluetooth section, and look for available devices. Select your JBL soundbar from the list. Once paired, your TV will connect to the soundbar automatically each time you turn on both devices.
If the sound lags noticeably during movies or shows, switch to HDMI or optical instead. Some TVs also have a Bluetooth audio delay setting in the sound menu — if you find it, try increasing the delay value to sync the picture and sound, though this is not always reliable.
Changing your TV's audio output settings
After you plug in the cable or pair via Bluetooth, your TV may still send sound to its built-in speakers instead of the soundbar. You need to tell your TV where to send the audio.
On most TVs, press the Menu or Settings button on your remote. Navigate to Sound, Audio, or Sound Output. Look for an option called "Speaker Output", "Audio Output", "Sound Output", or "External Speaker". Select the soundbar or the connection type you used (HDMI, Optical, or Bluetooth). Save your changes and exit the menu.
If you cannot find this setting, check your TV's manual or search the manufacturer's website with your TV model number. Some brands bury this option under different names — Samsung calls it "Sound Output", LG calls it "Audio Output", and Roku calls it "Audio". Once you change it, the soundbar will be your default audio device every time you turn on your TV.
Troubleshooting when the soundbar does not produce sound
If you have connected the cable but hear nothing from the soundbar, start by checking the volume. Press the volume button on the soundbar itself or on its remote — the display should show a number or bar rising. If the volume is at zero or muted, turn it up.
Next, confirm the TV is sending audio to the soundbar and not to its own speakers. Go back to your TV's audio output settings and verify you selected the soundbar or the correct connection type. If you selected HDMI but the soundbar has no sound, try switching to Optical in the TV settings, or vice versa.
If the soundbar still has no sound, unplug both devices for 30 seconds, then plug them back in and wait for them to fully restart. This often fixes connection problems. If you used HDMI, try a different HDMI cable — some cables are damaged or do not carry audio properly. For optical connections, make sure the cable is pushed all the way into both ports and that the plastic cover on the TV's optical port was fully removed.
Controlling the soundbar with your TV remote
When you connect via HDMI, your TV remote can usually control the soundbar's volume without any extra setup. Press the volume up or down button on your TV remote and the soundbar volume should change. If it does not, your TV may need HDMI-CEC enabled — this is a feature that lets HDMI devices communicate with each other.
Go to your TV's settings menu and search for HDMI-CEC, HDMI Control, or Anynet+ (Samsung uses this name). Turn it on. Then try your TV remote's volume buttons again. If the soundbar still does not respond, check your soundbar's manual to see if it has a setting to enable remote control via HDMI.
If you connected via optical or Bluetooth, your TV remote will not control the soundbar volume — you will need to use the soundbar's own remote or a universal remote programmed to your soundbar's code.
Frequently Asked Questions
Do I need a special HDMI cable for a soundbar?
No. Any standard HDMI cable works with a soundbar. You do not need an expensive "high-speed" or "premium" cable — a basic HDMI cable costs a few dollars and performs the same. Make sure it is long enough to reach from your TV to the soundbar without stretching.
Can I use the soundbar and my TV speakers at the same time?
Most TVs will send audio to either the soundbar or the built-in speakers, not both. If you want both to play, check your TV's audio settings for an option like "TV Speaker" or "Dual Audio" — not all TVs have this feature. If yours does not, you will need to choose one or the other.
Why is there a delay between the picture and sound when I use Bluetooth?
Bluetooth has inherent latency — a small but noticeable delay as the signal travels wirelessly. HDMI and optical cables send the signal when ready, so they do not have this problem. If the delay bothers you, switch to HDMI or optical instead.
What if my TV does not have HDMI or optical ports?
Older TVs sometimes have only RCA audio ports (red and white connectors). You can buy an RCA-to-optical converter or an RCA-to-HDMI converter online for under twenty dollars. Plug the RCA cables into the converter, then connect the converter to your soundbar using the appropriate cable type.
Do I need to update my soundbar's firmware after connecting it?
Check your soundbar's manual or the JBL website to see if a firmware update is available. Updates can improve sound quality and fix connection issues. Most JBL soundbars can update via a mobile app or by connecting to your home Wi-Fi network, separate from the TV connection.