The simplest way: HDMI eARC or optical cable
Most LG soundbars connect to LG TVs through one of two wired methods. The fastest and most reliable is HDMI eARC (enhanced Audio Return Channel), which sends sound from the TV back through the same HDMI cable that carries picture. If your TV and soundbar both have eARC ports—usually labeled on the back—this is your best choice. Plug the soundbar's HDMI cable into the eARC port on your TV, then go into the TV's sound settings and switch the output from the TV speakers to HDMI.
If your TV or soundbar lacks eARC, use an optical cable instead. This is a thin fiber-optic cord that carries digital sound. Plug one end into the optical audio output on the back of your TV and the other into the optical input on the soundbar. Optical is older but extremely reliable and works with nearly every LG model made in the last ten years.
After connecting either cable, turn on both devices and check that sound is coming from the soundbar, not the TV speakers. If you hear nothing, go to your TV's Settings menu, find Sound or Audio Output, and make sure it is set to the port you just plugged into.
Key Takeaways
- HDMI eARC is the fastest connection method if both your TV and soundbar have eARC ports, and it requires only one cable.
- Optical cable is a reliable backup if eARC is not available, and it works with older LG models that lack HDMI eARC.
- After plugging in the cable, you must switch the TV's audio output setting from the TV speakers to the soundbar in the Sound menu.
- Bluetooth pairing is possible but not recommended for everyday use because it can drop connection and drain the soundbar battery.
- If you hear no sound after connecting, check that the soundbar is powered on and that the TV's audio output is not muted or set to TV speakers.
Finding the eARC port on your TV and soundbar
The eARC port is a standard HDMI port, but it is only one of them. On most LG TVs, it is the rightmost HDMI port when you look at the back of the set. Check your TV's manual or look for a small label that says "eARC" or "ARC" printed next to the port. If you do not see a label, try plugging into the HDMI port farthest to the right first—that is where LG usually places it.
On your soundbar, the eARC port is usually on the back panel. It may be labeled "HDMI In" or "HDMI eARC." If the soundbar has only one HDMI port, that is your eARC port. Some soundbars have two HDMI ports: one for eARC and one for a Blu-ray player or game console. The manual that came with your soundbar will tell you which is which, or you can find the model number on the back and search for the manual online.
Switching your TV's audio output to the soundbar
After the cable is plugged in, the TV will not automatically send sound to the soundbar. You must tell it to. Press the Menu button on your TV remote and look for Sound, Audio, or Speaker settings. The exact name varies by model year, but it is always in the main Settings menu.
Inside the Sound menu, look for an option called Audio Output, Speaker Output, or Sound Output. You should see a list with choices like "TV Speaker," "External Speaker," or the name of your soundbar. Select the soundbar or "External Speaker." Some TVs also have a separate toggle for eARC that you may need to turn on. Once you have made the change, press Enter or OK to save it.
Turn the soundbar volume up to a comfortable level using its remote or the buttons on the back. You should now hear all TV sound—shows, movies, apps—coming from the soundbar instead of the TV speakers. If you still hear sound from the TV speakers as well, go back into the Sound menu and make sure the TV speakers are turned off or muted.
Using Bluetooth if you do not have eARC or optical
If your TV and soundbar do not have eARC or optical ports, Bluetooth is an option, but it is not ideal for daily use. Bluetooth can lose connection if the soundbar moves out of range or if another device pairs with it, and it drains the soundbar battery if it is not plugged in.
To pair via Bluetooth, put the soundbar into pairing mode by holding the Bluetooth button on the back for three seconds until a light blinks. On your TV, go to Settings, then Sound or Bluetooth, and look for available devices. Select your soundbar from the list. Once paired, the soundbar should connect automatically when you turn it on, but the connection is not as stable as a wired cable.
If Bluetooth keeps dropping, switch to a wired connection as soon as you can. Bluetooth is best used as a backup for occasional use, not as your main way to listen to TV.
Troubleshooting when you hear no sound
If you plugged in the cable but hear nothing from the soundbar, start with the simplest checks. Make sure the soundbar is powered on—there should be a light on the front or back. Check that the volume on the soundbar is not turned all the way down. If the soundbar has a mute button, press it to unmute.
Next, go back into your TV's Sound menu and confirm that the audio output is set to the soundbar, not the TV speakers. Some TVs default back to TV speakers if you unplug the soundbar or restart the TV, so you may need to change it again. Also check that the cable is pushed all the way into both ports—a loose connection will cut off sound.
If you are using optical cable and still hear nothing, try swapping the cable for a different one if you have one available. Optical cables can be damaged inside even if they look fine on the outside. If a new cable works, the old one was faulty. If the problem persists with a new cable, the optical port on either the TV or soundbar may be damaged, and you should contact LG support or consider a different connection method.
Controlling soundbar volume from your TV remote
Once the soundbar is connected via eARC or optical, your TV remote should control the soundbar volume automatically. Press the volume up and down buttons on your TV remote and watch the soundbar volume change. If this does not work, go into your TV's Settings menu and look for a Remote Control or Device Control option. Some LG TVs require you to enable "HDMI Device Control" or "CEC" (Consumer Electronics Control) to send volume commands through the HDMI cable.
If you cannot find this setting or it does not work, you can still use the soundbar's own remote to adjust volume. Most LG soundbars come with a small remote, or you can read the LG Sound Bar app on your phone to control volume and settings from there.
Connecting a second HDMI device without losing soundbar audio
If you want to plug a Blu-ray player, game console, or streaming device into your TV while keeping the soundbar connected, use a different HDMI port. The eARC port should stay plugged into the soundbar. Plug your other devices into the remaining HDMI ports on the TV. The TV will send audio from all of them to the soundbar automatically, as long as the audio output setting is still pointed to the soundbar.
If you have more devices than HDMI ports, you can buy an HDMI switch box that lets you plug multiple devices into one port. Make sure the switch box supports eARC if you are using it on the eARC port, or use it on a regular HDMI port and keep eARC free for the soundbar.
Frequently Asked Questions
Do I need to use the LG Sound Bar app to connect my soundbar to my TV?
No. The app is optional and is only for controlling volume and settings from your phone. The soundbar will work with your TV as soon as you plug in the cable and switch the TV's audio output setting. The app is useful if you lose the soundbar remote, but it is not required to use the soundbar.
Can I use both the soundbar and TV speakers at the same time?
You can, but it is not recommended because the sound will be out of sync and sound strange. If you want to use only the TV speakers sometimes, go into the Sound menu and switch the audio output back to TV Speaker. To switch back to the soundbar, select it again from the same menu.
What if my soundbar has HDMI but my TV only has optical?
Use the optical cable instead of HDMI. Optical works just as well and is actually more reliable in some cases. You do not need eARC or HDMI to get good sound from your soundbar.
Will the soundbar work if I unplug the TV?
No. The soundbar receives its audio signal from the TV through the cable, so it needs the TV to be on and powered. If you want to listen to music or other audio on the soundbar without the TV, you will need to connect a different device like a phone or tablet via Bluetooth.
Why does my soundbar keep disconnecting via Bluetooth?
Bluetooth has a limited range and can be interrupted by other wireless devices. If you are using Bluetooth, move the soundbar closer to the TV and away from other electronics. For a more stable connection, switch to an eARC or optical cable instead.