The three ways to connect a soundbar
Most soundbars connect to a TV using one of three methods: HDMI, optical cable, or Bluetooth. HDMI is the fastest and carries both picture and sound through one cable. Optical cable (also called TOSLINK) carries sound only and works with almost any TV made in the last 15 years. Bluetooth is wireless but can drop the connection if something blocks the signal between the soundbar and TV.
Your TV manual or the back panel will tell you which ports it has. Your soundbar manual will list which connection types it supports. Most soundbars support all three, but some budget models skip one or two. The best choice depends on what your TV has and how far apart they sit.
Before you plug anything in, power off both the TV and soundbar. This prevents damage to the ports and makes the connection more stable.
Key Takeaways
- HDMI is the strongest connection and works best if your TV and soundbar are close enough to run a cable between them.
- Optical cable is the second choice and works with nearly every TV, even older models without HDMI.
- Bluetooth is wireless but can lose connection if walls or distance block the signal, so it works best in small rooms.
- After you plug in the cable, you may need to change your TV's audio output settings so sound goes to the soundbar instead of the TV speakers.
Connecting with HDMI
HDMI is the strongest connection because it carries both video and audio in one cable and supports the newest sound formats. Look for the HDMI port on the back of your TV labeled "HDMI ARC" or "HDMI eARC" — this is the port that sends sound back to the soundbar. If your TV has no ARC port, use any HDMI port, but the connection will be weaker.
Plug one end of an HDMI cable into the HDMI ARC port on your TV and the other end into the HDMI input on your soundbar. Then turn on both devices. Your TV should recognize the soundbar within a few seconds. Go to your TV's settings menu, find the audio or sound section, and change the audio output from "TV speakers" to "HDMI" or "external speaker." The exact wording depends on your TV brand.
If sound still comes from the TV speakers instead of the soundbar, go back to the audio settings and look for an option called "HDMI audio format" or "audio output." Set it to "PCM" if you see it. If the soundbar still does not receive sound, restart both devices and try again.
Connecting with an optical cable
An optical cable (TOSLINK) is thinner than HDMI and carries only sound, not video. It works with older TVs and is more reliable over longer distances. Look for the optical port on the back of your TV — it is a small square opening, often labeled "optical out" or "TOSLINK." Your soundbar will have a matching port on the back.
Plug one end of the optical cable into the TV's optical port and the other into the soundbar's optical port. The cable has a small clip on each end that clicks into place. Turn on both devices. Go to your TV's audio settings and change the output from "TV speakers" to "optical" or "external speaker." The menu name varies by brand.
Optical cables are less likely to have connection problems than HDMI, but they also do not support the newest surround sound formats. If you have a choice between HDMI and optical, use HDMI. If your TV is older or you need a longer cable run, optical is reliable.
Connecting with Bluetooth
Bluetooth is wireless, so you do not need a cable. It works best in small rooms where the TV and soundbar are within 30 feet of each other with no thick walls between them. Put the soundbar in pairing mode — usually by pressing and holding a button on the back or remote for three to five seconds until a light blinks. Check your soundbar manual for the exact button.
Go to your TV's Bluetooth settings, usually found under audio or connectivity. Select the soundbar from the list of available devices. The TV will pair with it and remember it for next time. Turn on the TV's audio output and set it to Bluetooth. From now on, the soundbar should connect automatically when you turn it on.
Bluetooth can drop the connection if you move the soundbar far from the TV, if you place it in a cabinet, or if other wireless devices nearby interfere with the signal. If the connection keeps dropping, move the soundbar closer to the TV or switch to HDMI or optical instead.
Changing your TV's audio settings after connection
After you plug in the cable or pair via Bluetooth, your TV may still play sound through its own speakers instead of sending it to the soundbar. This is because the TV's default audio output is set to internal speakers. You need to change this in the settings menu.
On most TVs, press the menu or settings button on the remote. Look for audio, sound, or speaker settings. You will see an option for audio output or speaker selection. Change it from "TV speakers" or "internal" to the connection type you used — "HDMI," "optical," "external speaker," or "Bluetooth." Save the change and exit the menu. Sound should now come from the soundbar.
If you still hear sound from both the TV and the soundbar, go back to audio settings and look for an option to turn off the TV speakers or disable internal audio. Some TVs call this "speaker output" or "audio out." Turn it off so only the soundbar plays sound.
Troubleshooting when the soundbar does not receive sound
If you have plugged in the cable or paired the devices but hear no sound from the soundbar, start by checking the volume. Press the volume up button on the soundbar remote or the soundbar itself. If the volume is at zero, turn it up. Check that the soundbar is powered on — there should be a light on the front panel.
Next, go back to your TV's audio settings and confirm that the output is set to the connection you used. If it still shows "TV speakers," change it again and save. Restart both the TV and soundbar by turning them off, waiting 30 seconds, and turning them back on. This clears temporary glitches that prevent the connection from working.
If you used HDMI, try a different HDMI port on the TV. If you used optical, check that the cable is pushed all the way in — the clip should click. If you used Bluetooth, delete the soundbar from your TV's paired devices list and pair it again from scratch. If none of these steps work, check your soundbar manual for a reset button, usually on the back panel, and hold it for 10 seconds to restore factory settings.
When to call for help
If you have tried all the steps above and the soundbar still does not receive sound, the problem may be a faulty cable, a port that does not work, or a soundbar that needs repair. Test with a different cable first — borrow one from a friend if you can. If a different cable works, the original cable is damaged and needs to be replaced.
If the cable is not the problem, the TV's audio output port may be broken, or the soundbar may have an internal fault. At this point, contact the soundbar manufacturer's support line — they can walk you through more advanced troubleshooting or arrange a replacement if the soundbar is still under warranty. If the TV's port is broken, you may need a technician to repair it, or you can switch to a different connection type if your TV has one.
Frequently Asked Questions
Can I use a regular HDMI cable or does it have to be a special one?
A regular HDMI cable works fine for connecting a soundbar to a TV. You do not need a special cable. Any HDMI cable rated for your TV's HDMI version will carry sound and picture. If you have an old HDMI cable lying around, it will work.
Do I need to turn the soundbar on before the TV or does the order matter?
The order does not matter for HDMI or optical. For Bluetooth, turn on the soundbar first so it enters pairing mode, then turn on the TV. After they pair once, they will connect automatically in any order you turn them on.
Why does my soundbar keep losing Bluetooth connection?
Bluetooth drops when the soundbar is too far from the TV, when something blocks the signal between them, or when other wireless devices nearby interfere. Move the soundbar closer to the TV or switch to HDMI or optical for a more stable connection.
Can I connect two soundbars to one TV?
Most TVs can only send audio to one device at a time, so you cannot connect two soundbars and have them both play sound. You can pair both via Bluetooth and switch between them, but only one will receive sound at a time.
What if my TV does not have an optical port or HDMI ARC?
Older TVs sometimes have only basic HDMI ports with no ARC. In that case, use a regular HDMI port if the soundbar supports it, or use Bluetooth. If your TV has neither optical nor HDMI ARC, Bluetooth is usually your only wireless option.