Connect Your Onn Soundbar Using HDMI or Optical Cable

The fastest way to connect an Onn soundbar to a Roku TV is through HDMI ARC (Audio Return Channel) if your soundbar and TV both have it. HDMI ARC lets the TV send sound back through the same cable you use for picture, so you need only one cable instead of two. If your soundbar or TV lacks HDMI ARC, use a digital optical cable instead — it carries audio only and works just as well.

Check the back of your soundbar and TV first. Look for a port labeled "HDMI ARC," "eARC," or "HDMI" with a small arrow pointing both directions. On Roku TVs, this is usually HDMI port 3 or 4. If you do not see HDMI ARC on either device, look for a round port labeled "Optical," "SPDIF," or "Audio Out." You will use whichever connection your equipment has.

Key Takeaways

  • HDMI ARC is the simplest connection method if both your soundbar and Roku TV support it, requiring only one cable.
  • Digital optical cable works as a backup if HDMI ARC is not available on either device.
  • After connecting the cable, you must change your Roku TV's audio output setting to send sound to the soundbar instead of the TV speakers.
  • If the soundbar does not turn on automatically when the TV powers on, you may need to enable CEC (Consumer Electronics Control) in your Roku settings.
  • Bluetooth pairing is not the standard way to connect an Onn soundbar to a Roku TV and often causes audio delay.

Step-by-Step Connection Using HDMI ARC

Unplug both the soundbar and TV from power before you start. This prevents electrical damage if something goes wrong during the connection. Locate the HDMI ARC port on the back of your Roku TV — it is usually labeled and sits among the other HDMI ports. Plug one end of an HDMI cable into that port.

Plug the other end of the HDMI cable into the HDMI ARC port on your soundbar. The port may be labeled "HDMI In" or "HDMI ARC" depending on the model. Make sure the cable is pushed in firmly until you hear or feel a click. Plug both devices back in and turn them on. Wait 30 seconds for them to fully boot up before testing the sound.

Pick up your Roku remote and press the Home button. Navigate to Settings, then select Audio. Look for an option called Audio Output or Speaker Settings. Change it from "TV Speakers" to "HDMI ARC" or "External Speakers." The exact wording varies by Roku model, but the setting will be in this menu. Save your changes and test by playing something on the TV — you should hear sound from the soundbar, not the TV speakers.

Connection Using Digital Optical Cable

If your devices do not have HDMI ARC, a digital optical cable works just as well and costs less. Unplug both devices. Locate the optical port on the back of your Roku TV — it is a small round port, usually labeled "Optical Out" or "SPDIF." On some Roku models, you may need to remove a small plastic cover first by gently prying it with your fingernail.

Insert one end of the optical cable into the TV's optical port. The cable has a distinctive shape and only fits one way. Push it in until it clicks. Plug the other end into the optical port on your soundbar. Plug both devices back in and turn them on. Wait 30 seconds, then go to Settings > Audio on your Roku remote and change the audio output to "Optical" or "External Speakers."

Enable CEC So the Soundbar Turns On Automatically

CEC (Consumer Electronics Control) is a feature that lets your Roku TV communicate with the soundbar. When CEC is on, the soundbar powers on automatically when you turn on the TV, and powers off when you turn the TV off. Without it, you have to turn the soundbar on and off manually using its remote or power button.

On your Roku remote, press Home and go to Settings > System > Control Other Devices. Look for an option called CEC, HDMI CEC, or Anynet+ — the name depends on your Roku model. Turn it on. Your soundbar should now power on and off with the TV. If it does not, check that your soundbar also has CEC enabled. Consult your soundbar's manual for where that setting is located, as it varies by brand and model.

Why Bluetooth Is Not Recommended for This Connection

Some people try to pair an Onn soundbar to a Roku TV using Bluetooth, but this method causes problems. Bluetooth introduces a delay between the picture on your screen and the sound from the speaker — you will notice the audio lags behind what you see. This is especially noticeable during movies, sports, and dialogue-heavy shows. HDMI ARC and optical cable have no delay because they carry audio directly through a physical connection.

Bluetooth also drains the soundbar's battery faster if it is a wireless model, and the connection can drop if you move the remote too far from the TV. Stick with HDMI ARC or optical cable for the best experience. Save Bluetooth for pairing a phone or tablet to the soundbar when you want to play music from those devices.

Troubleshooting When You Hear No Sound

If you connected everything but hear nothing from the soundbar, start by checking the cable. Unplug it from both ends and plug it back in firmly — a loose connection is the most common cause. Make sure you plugged into the ARC port on the TV, not a regular HDMI port. Regular HDMI ports do not send audio back to the soundbar.

Next, check your Roku audio settings again. Go to Settings > Audio and confirm the output is set to "HDMI ARC" or "Optical," not "TV Speakers." If it is already set correctly, try changing it to "TV Speakers," waiting 10 seconds, then changing it back to the soundbar. This sometimes resets the connection. Turn the soundbar off and on again using its power button or remote.

If you still hear nothing, try a different HDMI cable or optical cable if you have one available — the cable itself may be faulty. Check that the soundbar is receiving power by looking for a light on the front panel. If there is no light, make sure it is plugged into a working outlet. If the soundbar has a volume knob or buttons, make sure the volume is not turned all the way down.

Frequently Asked Questions

Do I need to use HDMI ARC or can I just use regular HDMI?

Regular HDMI ports only carry picture from the TV to the soundbar, not audio back. You must use the HDMI ARC port specifically, which is usually labeled on the TV. If your TV or soundbar does not have HDMI ARC, use a digital optical cable instead.

What if my Roku TV does not have HDMI ARC?

Use a digital optical cable instead. Plug it into the "Optical Out" port on the back of your TV and the optical port on the soundbar. Then change your Roku audio settings to "Optical" or "External Speakers." Optical cables are inexpensive and work just as well as HDMI ARC.

Why is the soundbar not turning on when I turn on the TV?

CEC may not be enabled on your Roku TV or soundbar. Go to Settings > System > Control Other Devices on your Roku and turn on CEC. Check your soundbar's manual to see if it also has a CEC setting that needs to be turned on. If both are on and it still does not work, turn the soundbar on manually with its power button.

Can I use Bluetooth to connect my soundbar to the Roku TV?

Bluetooth is not recommended because it causes audio delay — the sound will lag behind what you see on screen. HDMI ARC and optical cable have no delay. Use Bluetooth only for connecting phones or tablets to the soundbar for music playback.

What if I hear sound from both the TV speakers and the soundbar?

Your Roku audio output is still set to "TV Speakers" instead of the soundbar. Go to Settings > Audio and change it to "HDMI ARC," "Optical," or "External Speakers" depending on which cable you used. The TV speakers should then go silent.