The fastest way: HDMI with ARC or eARC
Most Polk Audio soundbars connect to your TV using a single HDMI cable plugged into the HDMI port labeled ARC or eARC on the back of your TV. This is the simplest route because one cable carries both picture and sound, and your TV handles the volume control through your remote.
First, locate the HDMI ARC or eARC port on your TV—check your TV's manual if you are unsure which port it is, since the location varies by brand. Then plug one end of an HDMI cable into that port and the other end into the HDMI input on the back of your Polk soundbar. Power on both devices and switch your TV's input to the HDMI port you just used. The soundbar should appear in your TV's sound output menu within a few seconds.
If your TV does not have ARC or eARC, or if the soundbar does not show up, you may need to enable ARC in your TV's settings menu—usually found under Audio, Sound, or HDMI settings. Consult your TV's manual for the exact path, since it differs by manufacturer.
Key Takeaways
- HDMI ARC or eARC is the simplest connection method because one cable carries both video and audio, and your TV remote controls the volume.
- If your TV lacks ARC or eARC, use an optical digital cable instead, which requires a separate audio cable but works reliably on older TVs.
- Bluetooth is a wireless option but works best for streaming from phones or tablets, not for TV audio, because the connection can drop during use.
- After connecting, select the soundbar as your TV's audio output in the sound or audio settings menu, or the TV will continue playing sound through its built-in speakers.
Optical digital cable as a backup option
If your TV does not have HDMI ARC or eARC, or if you prefer not to use HDMI, an optical digital cable (also called a Toslink cable) is the next most reliable choice. This cable carries audio only, not video, so you will still see the picture on your TV screen while the soundbar handles all the sound.
Locate the optical audio output port on the back of your TV—it is usually a small square opening with a red or black plastic cover. Plug one end of the optical cable into that port and the other end into the optical input on the back of your Polk soundbar. Power on both devices, then go to your TV's audio settings and select the optical port as the audio output. Your TV remote will control the soundbar volume once this is set.
Optical cables are less common on newer TVs but remain standard on many mid-range and budget models. They are also more durable than HDMI cables for this purpose because the connection is less prone to loosening.
Bluetooth connection for phones and tablets
Polk Audio soundbars with Bluetooth can pair with your phone or tablet to play music, podcasts, or videos from streaming apps. However, Bluetooth is not ideal for regular TV watching because the connection can drop if you move the device too far away or if interference occurs.
To pair your phone or tablet, press and hold the Bluetooth button on the soundbar (or use the remote if your model has one) until the light blinks. On your phone or tablet, go to Bluetooth settings and select the Polk soundbar from the list of available devices. Once paired, audio from that device will play through the soundbar. The pairing usually stays active, so you will not need to repeat this step unless you pair a different device.
If the Bluetooth connection keeps dropping, move your phone closer to the soundbar or check for interference from other wireless devices like routers or cordless phones. Bluetooth works best when the soundbar and device are in the same room and within 30 feet of each other.
Checking your TV's audio output settings
After you plug in the cable, your TV may still play sound through its built-in speakers instead of sending it to the soundbar. This happens because your TV defaults to its internal speakers until you tell it otherwise.
Go to your TV's settings menu and look for Sound, Audio, or Speaker settings. You should see an option to select where audio plays—choose the HDMI port, optical port, or external speaker option depending on how you connected the soundbar. The exact wording varies by TV brand, but the setting is usually labeled "Audio Output" or "Speaker Output." Once you select the soundbar, your TV will send all sound to it and mute the built-in speakers.
If you cannot find this setting, check your TV's manual or search the manufacturer's website for your specific model number. Some TVs require you to enable ARC on the HDMI port before the soundbar will appear as an audio output choice.
Troubleshooting when the soundbar does not appear
If you connected the cable but the soundbar is not showing up in your TV's audio menu, start by powering off both devices completely, waiting 30 seconds, and powering them back on. This resets the connection and often solves the problem.
Next, check that the cable is fully inserted into both the TV and the soundbar—a loose connection will prevent the devices from recognizing each other. If you are using HDMI ARC, make sure you plugged into the correct HDMI port on your TV, not just any HDMI port. Consult your TV's manual to confirm which port supports ARC.
If the soundbar still does not appear, try a different HDMI cable if you have one available, since defective cables are common. For optical connections, make sure the plastic cover on the optical port is removed and the cable is pushed in until it clicks. If none of these steps work, your TV may not support the connection method you are using, and you may need to try a different cable type.
Using the soundbar remote or app
Most Polk Audio soundbars come with a physical remote that controls volume, input selection, and sound modes. Keep this remote in an accessible place because you will use it to switch between HDMI, optical, and Bluetooth inputs if you connect the soundbar to multiple devices.
Some Polk models also have a mobile app that lets you adjust volume and settings from your phone. read the app from the Google Play Store or Apple App Store, open it, and follow the on-screen instructions to connect it to your soundbar. The app is optional—the physical remote works fine on its own—but it is useful if you frequently misplace the remote or want to control the soundbar from another room.
If your soundbar has a power button on the back, you can also control it by turning the device on and off, though this is less convenient than using the remote. Most Polk soundbars stay in standby mode when powered off, so they wake up quickly when you turn on your TV.
Frequently Asked Questions
Do I need a special HDMI cable for ARC?
No, any standard HDMI cable works for ARC. The cable itself is the same; the difference is that your TV and soundbar must both support ARC, and you must plug into the ARC-labeled port on your TV. If you already have an HDMI cable at home, try it first before buying a new one.
Can I use both HDMI and optical cables at the same time?
You can plug both cables in, but your TV will only send audio through one at a time. Use your TV's audio settings to choose which input the soundbar listens to. Switching between them requires going back into the settings menu, so most people pick one cable and stick with it.
Why is my soundbar volume stuck at maximum or minimum?
If your TV remote does not control the soundbar volume, your TV is not recognizing the soundbar as the audio output. Go back to your TV's audio settings and make sure the soundbar input is selected. If it is already selected, try unplugging the soundbar for 30 seconds and plugging it back in to reset the connection.
Will the soundbar work if my TV is older?
Older TVs often lack HDMI ARC, but most have an optical audio output port. Use an optical cable instead, and the soundbar will work just as well. Check the back of your TV for a small square port with a red or black cover—if it is there, your TV can connect to the soundbar.
What if the soundbar keeps disconnecting from Bluetooth?
Move your phone or tablet closer to the soundbar and away from other wireless devices like routers. If the problem continues, forget the soundbar from your phone's Bluetooth settings and pair it again from scratch. Bluetooth interference is common in homes with many wireless devices, so moving the soundbar to a more central location can help.