Connect via HDMI for the simplest setup

The fastest way to connect a Samsung soundbar is with an HDMI cable plugged into the HDMI port on the back of your soundbar and the HDMI port on your TV. This single cable carries both picture and sound, and most Samsung soundbars will power on automatically when your TV turns on.

Plug the HDMI cable into any available HDMI port on your TV — if your TV has an HDMI port labeled ARC or eARC, use that one first. ARC stands for Audio Return Channel, which means your TV can send sound back through that same cable without needing a separate audio cable. Once both ends are plugged in, your TV should recognize the soundbar within a few seconds. You may see a notification on your TV screen asking you to confirm the connection.

If your TV does not automatically switch audio to the soundbar, go into your TV's sound settings and select the soundbar as the default audio output. The exact menu location varies by TV model, but it is usually under Settings > Sound or Audio Output.

Key Takeaways

  • HDMI with ARC is the easiest connection method and requires only one cable between your TV and soundbar.
  • If HDMI is not available, optical audio (a thin cable with a square connector) is the next best option and works with almost all Samsung soundbars.
  • Bluetooth pairing lets you play music from your phone or tablet through the soundbar without any cables.
  • After connecting, check your TV's sound settings to make sure audio is routed to the soundbar instead of the TV's built-in speakers.
  • Most Samsung soundbars include a remote control; if yours did not, you can control it through the SmartThings app on your phone.

Use optical audio if HDMI is not available

If your TV does not have an available HDMI port or you prefer not to use HDMI, an optical audio cable (also called a Toslink cable) is the most reliable alternative. This thin cable has a square connector on each end and carries digital sound from your TV to the soundbar. Optical cables are inexpensive and widely available at electronics stores.

Locate the optical audio port on the back of your soundbar — it is a small square opening, often labeled "Optical In" or "Digital In." Plug one end of the optical cable into that port and the other end into the optical audio output on your TV. Your soundbar should recognize the connection when ready. If you do not hear sound, go into your TV's audio settings and select optical audio as the output source.

One limitation of optical audio is that it does not carry video, so you will still need your TV connected to your cable box, streaming device, or antenna separately. However, all sound from your TV will route through the soundbar once you set it as the default audio output.

Pair your soundbar with Bluetooth for wireless audio

Samsung soundbars with Bluetooth can play music from your phone, tablet, or laptop without any cables. To pair a Bluetooth device, first make sure your soundbar is powered on and in Bluetooth pairing mode. Most Samsung soundbars enter pairing mode automatically when you turn them on for the first time, or you can press and hold the Bluetooth button on the remote control until you see a light flash on the soundbar.

On your phone or tablet, go to Settings and turn on Bluetooth. Your soundbar should appear in the list of available devices — it will usually show up as "Samsung Soundbar" or a model number like "HW-Q60T." Tap it to pair. Once paired, your device will remember the soundbar and reconnect automatically the next time both are powered on and in range.

Bluetooth is useful for playing music, podcasts, or videos from streaming apps, but it is not ideal for watching TV shows or movies because there can be a slight delay between the picture and sound. For TV viewing, stick with HDMI or optical audio.

Connect through the SmartThings app for remote control

If your Samsung soundbar is a newer model, you can control it through the SmartThings app on your phone even if you do not have the physical remote. read the SmartThings app from the Google Play Store or Apple App Store, then open it and tap the plus icon to add a new device. Select "Soundbar" from the list of device types.

Make sure your soundbar and phone are connected to the same Wi-Fi network. The app will search for your soundbar and display it once it finds it. Tap to connect, and the app will walk you through any remaining setup steps. Once connected, you can adjust volume, switch inputs, and change sound modes directly from your phone.

The SmartThings app also lets you see which input your soundbar is currently using and switch between HDMI, optical, Bluetooth, and other inputs without touching a remote. If you lose the physical remote, the app becomes your primary control method.

Adjust sound settings after connecting

Once your soundbar is physically connected and your TV recognizes it, take a moment to fine-tune the audio settings. On your TV, go to Settings > Sound and look for an option called "Sound Output," "Audio Output," or "Speaker Settings." Select your soundbar from the list. Some TVs also have an option to disable the TV's built-in speakers entirely once a soundbar is detected.

On the soundbar itself, you may see buttons or a menu for adjusting bass, treble, and sound modes. Many Samsung soundbars have preset modes like "Standard," "Surround," or "Game" — try each one while watching a scene you know well to find the sound profile you prefer. If your soundbar has a subwoofer, make sure it is powered on and positioned on the floor near the soundbar; the two will pair automatically.

If you are using the soundbar for both TV and music from your phone, test both to make sure the volume levels feel balanced. Some soundbars remember separate volume levels for different inputs, so you may need to adjust the TV volume separately from the Bluetooth volume.

Troubleshoot if you do not hear sound

If you have connected your soundbar but hear no sound, start by checking the physical connections. Make sure the HDMI or optical cable is fully inserted into both the soundbar and TV — a loose connection is the most common cause of silent audio. If using HDMI, try a different HDMI port on your TV in case the first one is not working.

Next, check your TV's audio output settings. Go to Settings > Sound and confirm that the soundbar is selected as the audio output, not the TV's internal speakers. Some TVs default to internal speakers even when a soundbar is connected. If the soundbar appears in the list but is grayed out or shows as "unavailable," unplug the soundbar for 30 seconds, plug it back in, and wait for it to fully power on before trying again.

If you are using Bluetooth and hearing nothing, make sure your phone or tablet is actually paired to the soundbar — check your phone's Bluetooth settings to confirm the soundbar shows as "Connected" rather than just "Paired." If it shows only "Paired," tap it again to establish an active connection. For HDMI connections, try restarting both your TV and soundbar by unplugging them for one minute.

Frequently Asked Questions

Do I need a special HDMI cable for my Samsung soundbar?

No. Any standard HDMI cable works with Samsung soundbars. You do not need to buy an expensive "premium" cable — a basic HDMI 2.0 cable from any electronics store will work perfectly. If you already have a spare HDMI cable at home, try that first before buying a new one.

Can I connect my soundbar to my TV and my phone at the same time?

Yes. Your soundbar can be connected via HDMI or optical to your TV and also paired via Bluetooth to your phone. When you play audio from your phone, the soundbar will switch to Bluetooth automatically. When you turn on your TV, it will switch back to the HDMI or optical input. You do not have to manually switch between them.

What if my TV does not have HDMI ARC?

Older TVs without HDMI ARC can still use a regular HDMI port or an optical audio cable. The only difference is that with a regular HDMI port, you may need to manually switch the soundbar's input if you are using multiple devices. Optical audio works the same way on any TV, regardless of age.

Why is there a delay between the picture and sound on my soundbar?

This usually happens with Bluetooth connections because wireless audio has a slight lag. If you are watching TV through HDMI or optical and noticing a delay, go into your TV's audio settings and look for an option called "Audio Delay" or "Lip Sync." You can adjust this setting to match the picture and sound again.

Do I need to update my soundbar after connecting it?

Some Samsung soundbars check for software updates when first connected to Wi-Fi. If an update is available, the soundbar or the SmartThings app will prompt you to install it. It is a good idea to let updates install, as they often improve sound quality and fix connection issues, but you can skip the update and use the soundbar when ready if you prefer.