Connect Your Samsung Soundbar to Bluetooth in Four Steps

To connect a Bluetooth device to your Samsung soundbar, turn on the soundbar, press and hold the Bluetooth button on the remote or the soundbar itself for three to five seconds until the light blinks blue, then search for the soundbar on your phone or tablet and select it from the list. The soundbar will remember the device after the first connection, so future pairing happens automatically when both are powered on and in range.

The exact button location and light color vary slightly between Samsung soundbar models — some have a dedicated Bluetooth button on the remote, others require you to hold the source or input button — but the principle is the same across all models. Once paired, your soundbar will connect without prompting the next time you turn it on.

Key Takeaways

  • Put your Samsung soundbar into pairing mode by holding the Bluetooth button on the remote or soundbar for three to five seconds until you see a blue blinking light.
  • Open Bluetooth settings on your phone, tablet, or laptop and select your soundbar from the available devices list.
  • After the first successful connection, your soundbar automatically reconnects to that device whenever both are powered on.
  • If your soundbar does not appear in the Bluetooth list, restart both devices and try pairing again within ten feet of the soundbar.

Locate the Bluetooth Button on Your Remote or Soundbar

Samsung soundbars have the Bluetooth button in different places depending on the model. On most remotes, it is a dedicated button labeled with a Bluetooth symbol (two triangles pointing upward). On some soundbars, the button is on the top or side of the unit itself and may be labeled "Source," "Input," or "Bluetooth."

Check your soundbar's manual or the label on the back of the unit to confirm which button controls Bluetooth on your specific model. If you cannot find the manual, search your soundbar's model number on Samsung's website — the model number is usually printed on the back or bottom of the unit.

Put Your Soundbar into Pairing Mode

Press and hold the Bluetooth button for three to five seconds. You will see a light on the soundbar or remote change color — usually to blue — and it will blink or pulse to show the soundbar is in pairing mode. This mode stays active for about two to three minutes, so you have time to find your phone or tablet.

If the light does not change, try holding the button longer or check that the soundbar is powered on. Some models require you to press the button once to switch to Bluetooth mode, then hold it again to enter pairing mode. If you are unsure, consult the manual for your specific model.

Search for Your Soundbar on Your Device

On your phone, tablet, or laptop, open the Bluetooth settings. On Android phones, this is usually under Settings > Connected Devices > Bluetooth. On iPhones and iPads, go to Settings > Bluetooth. On Windows computers, open Settings > Devices > Bluetooth & Other Devices. On Mac, go to System Preferences > Bluetooth.

Your Samsung soundbar will appear in the list of available devices with a name like "Samsung Soundbar" or a model number. Tap or click on it to connect. Your device may ask you to confirm the pairing — if so, select "Pair" or "Connect." The soundbar light will stop blinking and stay solid blue once the connection is complete.

Test the Connection and Troubleshoot if Needed

Play audio on your phone or tablet — music, a video, or a podcast — and listen to see if the sound comes through the soundbar. The volume on your device should control the soundbar volume. If you hear nothing, check that the soundbar is not muted (look for a mute icon on the display) and that the volume is turned up.

If your soundbar does not appear in the Bluetooth list, restart both devices and try again. Make sure you are within ten feet of the soundbar and that no other Bluetooth devices are actively connected to it. If the soundbar was previously paired to a different device, it may try to reconnect to that device instead — disconnect it from the old device first, then pair with the new one.

Reconnect to the Same Device Automatically

After the first successful pairing, your soundbar remembers that device. The next time you turn on both the soundbar and your phone or tablet, they will connect automatically without any button pressing or menu navigation. This automatic reconnection works as long as both devices are powered on and within Bluetooth range (typically 30 feet in an open room).

If you want to connect a different device, put the soundbar back into pairing mode and select it from the new device's Bluetooth list. The soundbar can remember multiple devices but will only connect to one at a time — whichever one you turn on first or bring closest to the soundbar.

Pair Multiple Devices to the Same Soundbar

Your Samsung soundbar can be paired to several phones, tablets, or computers, but it connects to only one at a time. To add a new device, put the soundbar into pairing mode again by holding the Bluetooth button, then search for it on the new device and select it. The soundbar will add this device to its memory.

When you want to switch between devices, disconnect the current device from Bluetooth, then turn on Bluetooth on the device you want to use. The soundbar will reconnect to it automatically. If the soundbar tries to reconnect to the wrong device, manually disconnect it from that device's Bluetooth settings first.

Frequently Asked Questions

Why does my Samsung soundbar not show up in Bluetooth search?

The soundbar may not be in pairing mode. Hold the Bluetooth button for the full three to five seconds — a quick press is not enough. Also check that the soundbar is powered on and that you are within ten feet of it. If it still does not appear, power off both devices, wait ten seconds, and try again.

Can I connect my soundbar to multiple phones at the same time?

No, the soundbar connects to only one device at a time. However, it can be paired to multiple phones in its memory. To switch between them, disconnect Bluetooth on the current phone and turn on Bluetooth on the phone you want to use. The soundbar will reconnect automatically.

What if my soundbar keeps disconnecting from Bluetooth?

Move your phone or tablet closer to the soundbar — interference from walls or other devices can cause drops. Also check that your soundbar firmware is up to date by visiting Samsung's support website. If disconnections continue, forget the soundbar from your device's Bluetooth settings and pair it again from scratch.

Does my soundbar need to be connected to WiFi to use Bluetooth?

No. Bluetooth and WiFi are separate connections. Your soundbar can use Bluetooth without being connected to WiFi. However, some Samsung soundbars offer additional features like firmware updates or voice control only when connected to WiFi.

How do I know if my soundbar is in pairing mode?

Look for a blinking blue light on the soundbar or remote. The light will pulse or flash repeatedly while pairing mode is active. Once your device connects, the light will stop blinking and stay solid blue or turn off, depending on your model.