The basic steps to pair your Samsung soundbar

To connect a Samsung soundbar to Bluetooth, put the soundbar in pairing mode, then search for it on your phone or other device and select it from the list. Most Samsung soundbars enter pairing mode automatically when you first turn them on, or you can press and hold the Bluetooth button on the remote or the soundbar itself for about three seconds until you see a light flash or hear a tone.

Once the soundbar is in pairing mode, go to your phone's Bluetooth settings, look for the soundbar's name (usually something like "Samsung Soundbar" or the specific model number), and tap it to connect. The first time you pair a device, it may take 10 to 20 seconds to complete. After that, your phone will remember the soundbar and reconnect automatically when both are turned on and in range.

If your soundbar has a display screen, it will often show "Pairing" or a Bluetooth symbol while waiting for a connection. Once paired successfully, the screen or indicator light will change to show the connection is active.

Key Takeaways

  • Put your soundbar in pairing mode by pressing and holding the Bluetooth button on the remote or soundbar for about three seconds until a light flashes or you hear a tone.
  • On your phone or tablet, open Bluetooth settings and select your soundbar's name from the available devices list.
  • The first pairing takes 10 to 20 seconds; after that, the devices will reconnect automatically when both are powered on.
  • If pairing fails, restart both the soundbar and your phone, then try again from the beginning.
  • Some Samsung soundbars have a dedicated Bluetooth button on the remote that is faster than holding down a button for three seconds.

Finding the Bluetooth button on your remote or soundbar

The Bluetooth button location depends on your soundbar model. On most Samsung remotes, it is a button with a Bluetooth symbol (two triangles pointing upward) and is usually near the top or middle of the remote. Press and hold this button for three seconds to enter pairing mode.

If your remote does not have a dedicated Bluetooth button, look for a button labeled "Source," "Input," or "Mode." Pressing this cycles through available inputs, including Bluetooth. You may need to press it several times until the soundbar announces or displays "Bluetooth mode."

On the soundbar itself, the Bluetooth button is typically on the back or side panel. It is small and may be recessed slightly into the casing. If you cannot find it, check the manual for your specific model—Samsung includes a diagram showing button locations.

What to do if your soundbar won't enter pairing mode

If the soundbar does not respond when you press the Bluetooth button, the first step is to power it off completely, wait 10 seconds, and turn it back on. Then try pressing the Bluetooth button again. A full restart clears temporary connection problems that prevent pairing mode from activating.

If the soundbar still does not enter pairing mode, check whether it is already connected to another device. Samsung soundbars can only pair with one Bluetooth device at a time. If your soundbar is connected to a different phone or tablet, disconnect it first by going to that device's Bluetooth settings and selecting "Forget" or "Unpair." Then try pairing with your current device.

Some models have a reset button on the back panel, usually recessed and requiring a paperclip or pin to press. Holding this button for 10 to 15 seconds resets the soundbar to factory settings and clears all previous pairings. After a reset, the soundbar will enter pairing mode automatically when you turn it on next.

Checking your phone's Bluetooth settings

On Android phones, open Settings, tap "Connected devices" or "Bluetooth," and make sure Bluetooth is turned on. You should see a list of available devices. If your soundbar does not appear in the list, go back and make sure the soundbar is in pairing mode—the list only shows devices actively broadcasting a pairing signal.

On iPhones and iPads, open Settings, tap "Bluetooth," and toggle it on if it is off. Wait a few seconds for the device list to populate. Your soundbar should appear with its model name. If it does not show up after 30 seconds, restart the soundbar and try again.

If you see the soundbar in the list but tapping it does nothing, or if it says "Unable to connect," restart your phone and the soundbar, then try pairing again. Connection problems often clear after a restart of both devices.

Connecting multiple devices to the same soundbar

Samsung soundbars can remember multiple devices but can only play audio from one at a time. Once you have paired your phone, you can pair a tablet, laptop, or another phone by putting the soundbar back into pairing mode and following the same steps on the new device.

To switch between paired devices, straightforward start playing audio on the device you want to use. The soundbar will automatically switch to that device. If it does not switch automatically, go to the soundbar's Bluetooth menu (usually through the remote's Source or Input button) and manually select the device you want to hear.

If you want to remove a device from the soundbar's memory, access the soundbar's Bluetooth settings through its remote or app (if your model has one) and look for a "Forget" or "Remove device" option. Consult your manual for the exact steps, as this varies by model.

Using the Samsung SmartThings app for easier pairing

Many newer Samsung soundbars work with the SmartThings app, which is available for free on both Android and iOS. The app can simplify pairing by walking you through the process step by step and showing you the soundbar's current connection status.

To use the app, read it from the Google Play Store or Apple App Store, create a Samsung account if you do not have one, and open the app. Select "Add device" and choose your soundbar model from the list. The app will guide you through pairing and may offer additional features like volume control, input switching, and firmware updates.

Not all Samsung soundbar models are compatible with SmartThings, so check your soundbar's manual or the app's device list to confirm. If your model is not listed, the manual Bluetooth pairing method described above will still work.

Troubleshooting connection drops and audio lag

If your soundbar connects but then disconnects after a few minutes, the devices may be too far apart. Bluetooth typically works reliably within 30 feet, but walls, metal objects, and other wireless devices can reduce this range. Try moving your phone closer to the soundbar and see if the connection holds.

If you notice a delay between when you press play on your phone and when sound comes from the soundbar, this is normal for Bluetooth audio and is called latency. Most people do not notice it during music or podcasts, but it can be obvious during video playback. If this bothers you, check whether your soundbar has a wired connection option (HDMI, optical, or aux cable), which has no delay.

If the soundbar keeps disconnecting and reconnecting, restart both devices and try pairing again. If the problem continues, check whether your phone's Bluetooth is set to automatically connect to the soundbar. On Android, go to Bluetooth settings, find the soundbar, and tap the gear icon to see connection options. On iPhone, this setting is usually automatic and cannot be changed.

Frequently Asked Questions

Can I connect my Samsung soundbar to multiple phones at the same time?

The soundbar can remember multiple phones, but it can only play audio from one device at a time. You can switch between them by starting playback on a different phone, and the soundbar will automatically switch to that device. If it does not switch automatically, use the remote to manually select the device.

Why does my soundbar keep asking me to pair it every time I turn it on?

This usually means the pairing did not save properly. Restart both the soundbar and your phone, then pair them again. Make sure you wait for the pairing to complete fully before moving away from the soundbar. If it still does not save, try resetting the soundbar using the reset button on the back panel.

Is there a password or PIN code to pair my Samsung soundbar?

Most Samsung soundbars do not require a PIN code for Bluetooth pairing. If your soundbar asks for one, it is usually "0000" or "1234." Check your manual for the specific model, as some older or commercial models may use a different code.

Can I use Bluetooth and a wired connection at the same time?

No. The soundbar will only play audio from one input at a time. If you have both a Bluetooth device and a wired device connected, you must switch inputs using the remote's Source or Input button to change which one is active.

What should I do if my soundbar is not showing up in my phone's Bluetooth list?

Make sure the soundbar is powered on and in pairing mode—you should see a light flashing or hear a tone. Restart your phone's Bluetooth by turning it off and back on. If the soundbar still does not appear, restart the soundbar itself and try again. If it still does not show up, try resetting the soundbar using the reset button on the back panel.