The fastest way: HDMI eARC or optical cable first, then Bluetooth

Most Samsung soundbars connect to your TV through a physical cable first — either HDMI eARC or a digital optical cable — and that connection handles the main audio. Then you use Bluetooth to connect your phone or tablet to the soundbar for music streaming. This two-step approach is more reliable than trying to run everything over Bluetooth alone, because the TV-to-soundbar link stays stable even when you're not actively using your phone.

If your TV has an HDMI eARC port (usually labeled eARC or ARC), that's your best choice. eARC sends audio back to the soundbar from any input on your TV — cable box, streaming app, antenna — without you having to switch inputs manually. If your TV doesn't have eARC, a digital optical cable works nearly as well and costs about $10.

The wireless part — Bluetooth — is what lets you play music from your phone through the soundbar. It's separate from the TV connection and optional if you only watch TV through the soundbar.

Key Takeaways

  • Connect your Samsung soundbar to your TV using HDMI eARC (if available) or a digital optical cable before setting up Bluetooth.
  • The physical cable connection handles all TV audio automatically; Bluetooth is for streaming music from your phone or tablet.
  • Samsung soundbars pair with phones over Bluetooth the same way any speaker does — hold the Bluetooth button until the light blinks, then select the soundbar from your phone's Bluetooth list.
  • If your soundbar won't connect, restart both devices and check that the cable is fully inserted into the correct port on your TV.

Setting up the HDMI eARC connection

Locate the HDMI eARC port on your TV. On most Samsung TVs, it's HDMI 3 or HDMI 4, and the manual or the TV's settings menu will confirm which one. Plug one end of an HDMI cable into that port and the other end into the HDMI OUT port on the back of your soundbar.

Turn on both the TV and soundbar. Go to your TV's settings menu, find the Sound or Audio section, and look for an option called HDMI eARC, HDMI CEC, or Anynet+. Turn it on. Your TV should recognize the soundbar automatically within a few seconds, and you'll hear audio from the soundbar the next time you turn on the TV or change the input.

If the soundbar doesn't appear in your TV's settings, unplug both devices for 30 seconds, plug them back in, and try again. Make sure the HDMI cable is fully seated in both ports — a loose connection is the most common reason this step fails.

Using a digital optical cable if your TV has no eARC

If your TV doesn't have an eARC port, buy a digital optical cable (also called TOSLINK or S/PDIF). Plug one end into the optical audio output on your TV — it's usually a small square port labeled Optical Out or Audio Out — and the other end into the optical input on the soundbar.

Turn on both devices. Go to your TV's sound settings and set the audio output to Optical or Digital Audio. The soundbar should begin playing TV audio when ready. Unlike eARC, an optical cable only carries audio from one source at a time, so if you want to switch between cable TV and a streaming app, you may need to manually change the TV's audio output setting.

Optical cables are reliable and inexpensive, but they don't support newer audio formats like Dolby Atmos. If your soundbar and TV both support Atmos and you want that feature, eARC is the better choice.

Connecting your phone or tablet over Bluetooth

On the back or bottom of your Samsung soundbar, find the Bluetooth button (it may be labeled Bluetooth or have a Bluetooth symbol). Press and hold it for about 3 to 5 seconds until the Bluetooth light on the soundbar blinks blue or white. This puts the soundbar in pairing mode.

On your phone or tablet, open Settings, go to Bluetooth, and turn it on. Your Samsung soundbar should appear in the list of available devices — it will show the model name, like "Samsung HW-Q60C" or similar. Tap it to pair. Once connected, the Bluetooth light on the soundbar will stop blinking and stay solid, and you can play music from your phone through the soundbar.

If the soundbar doesn't appear in your phone's Bluetooth list, make sure it's still in pairing mode (the light should be blinking). If it's not, press the Bluetooth button again. If your phone has paired with the soundbar before but won't connect now, "forget" the soundbar in your phone's Bluetooth settings and pair it again from scratch.

Troubleshooting when the soundbar won't connect to your TV

If you've plugged in the HDMI or optical cable but hear no sound from the soundbar, the first step is to check that the cable is fully inserted into both the TV and the soundbar. A cable that looks plugged in but isn't seated all the way is the cause of most connection failures.

Next, restart both devices. Unplug the soundbar and TV from power, wait 30 seconds, and plug them back in. This clears temporary connection errors that sometimes happen during setup. Once both are back on, check your TV's sound settings again to confirm the audio output is set to the correct port (HDMI eARC or Optical).

If you're using eARC and it still isn't working, try switching to a different HDMI cable. Some cables are older or damaged and don't support eARC even though they look fine. If a different cable works, the original cable is the problem. If you're using an optical cable and the soundbar still won't play TV audio, make sure the cable isn't bent or kinked — optical cables are fragile and can break inside the sheath even if they look okay from the outside.

Why your soundbar might not stay connected

If the soundbar connects at first but then loses the TV audio after a few minutes or hours, the issue is usually a loose cable connection that's wiggling free. Check both ends of the HDMI or optical cable and push them in firmly. If the cable runs along the back of your TV stand or behind furniture, it may be getting pinched or bent — try routing it away from tight spaces.

Another common cause is that your TV's HDMI eARC setting has turned itself off. This can happen after a TV software update. Go back into your TV's sound settings and turn eARC back on. If it keeps turning off on its own, your TV may have a software issue, and you may need to contact Samsung support or your TV's manufacturer.

For Bluetooth connections to your phone, interference from other wireless devices (like a Wi-Fi router or microwave) can cause dropouts. Move the soundbar closer to your phone, or move the router away from the soundbar if possible. Bluetooth has a range of about 30 feet in open space, but walls and metal objects reduce that significantly.

Controlling the soundbar after it's connected

Once your soundbar is connected to your TV via HDMI eARC or optical cable, the TV remote usually controls the soundbar's volume automatically. You don't need a separate remote for everyday use. If the TV remote doesn't control the soundbar, go into your TV's settings and look for an option called "Control External Speakers" or "HDMI Device Control" and turn it on.

Most Samsung soundbars also come with their own remote, which gives you direct control of bass, treble, and sound modes. You can use either the TV remote or the soundbar remote — they both work at the same time. If you lose the soundbar remote, you can read the SmartThings app on your phone and use it to control the soundbar instead, as long as your soundbar is connected to your home Wi-Fi network.

Frequently Asked Questions

Do I need both a cable and Bluetooth, or just one?

You need the cable (HDMI eARC or optical) to hear TV audio through the soundbar. Bluetooth is optional and only needed if you want to play music from your phone. Most people use the cable for TV and Bluetooth for phone music, but you can use just the cable if you never stream music to the soundbar.

Can I connect the soundbar wirelessly to my TV without any cables?

Most Samsung soundbars don't support a fully wireless connection to the TV. They need either HDMI eARC or an optical cable to receive TV audio reliably. Some newer models may have Wi-Fi options, but check your soundbar's manual to see what your specific model supports. Bluetooth alone is not stable enough for TV audio.

What if my TV doesn't have eARC or an optical port?

Very few modern TVs lack both ports. Check your TV's manual or the ports on the back carefully — optical ports are small square openings, and eARC is usually one of the HDMI ports. If your TV truly has neither, you may need an adapter or a different connection method; contact Samsung support with your TV model number for options.

Why does my soundbar keep disconnecting from Bluetooth?

Bluetooth range is about 30 feet in open space, but walls and metal reduce it. Keep your phone closer to the soundbar, or move the soundbar away from your Wi-Fi router and microwave, which can interfere with Bluetooth. If it still disconnects, forget the soundbar in your phone's Bluetooth settings and pair it again.

Can I use the soundbar with multiple TVs?

Yes. You'll need to physically move the HDMI or optical cable to whichever TV you want to use, or buy a second cable for the other TV. For Bluetooth, you can pair the soundbar with multiple phones, but only one device can be connected at a time — you'll need to disconnect one phone before connecting another.