Connect the subwoofer using the dedicated pairing button

Most Samsung subwoofers pair to Samsung soundbars wirelessly through a one-time setup process. Turn on both the soundbar and subwoofer, then press and hold the pairing button on the back or bottom of the subwoofer for about 5 seconds until you see a light flash or hear a tone. The soundbar will search for the subwoofer automatically—this usually takes 10 to 30 seconds. When the connection is complete, the light on the subwoofer will stop flashing and stay solid, and you should hear sound from the subwoofer when you play audio through the soundbar.

If the pairing does not work on the first try, restart both devices by unplugging them for 30 seconds, then plug them back in and repeat the pairing process. Make sure the subwoofer is within 3 to 5 feet of the soundbar during pairing—distance can interfere with the wireless connection. Once paired, the subwoofer will reconnect automatically each time you turn on the soundbar, even if you move it to a different room later.

Key Takeaways

  • Press and hold the pairing button on the subwoofer for 5 seconds while the soundbar is on, and wait for the light to stop flashing.
  • Keep the subwoofer within 3 to 5 feet of the soundbar during the initial pairing process.
  • Once paired, the subwoofer will reconnect on its own each time you power on the soundbar.
  • If pairing fails, unplug both devices for 30 seconds, then try again from the beginning.
  • Some Samsung models allow you to adjust subwoofer volume through the soundbar remote or the SmartThings app.

Locate the pairing button on your specific model

The pairing button location varies by Samsung subwoofer model. On most models, the button is on the back panel near the power cord or on the bottom of the unit. Look for a small recessed button labeled "Pairing," "Connect," or sometimes just marked with a symbol. If you cannot find it, check the manual that came with your subwoofer—you can also find model-specific manuals on Samsung's support website by searching your subwoofer model number.

Some older Samsung subwoofers do not have a dedicated pairing button and instead pair through the soundbar's menu. If your subwoofer has no visible button, go to the soundbar's settings (usually accessed through the remote or the SmartThings app) and look for an option like "Add Subwoofer" or "Pairing Mode." The soundbar will then broadcast a signal for the subwoofer to detect.

Check that both devices are powered on and in range

Before you start pairing, make sure the soundbar is plugged in and turned on. The subwoofer should also be plugged in and powered on—look for a power light on the front or back of the unit. If the subwoofer has a power button, press it; some models turn on automatically when plugged in. Position the subwoofer as close to the soundbar as practical during pairing, ideally on the same shelf or within a few feet on the floor.

Walls, metal objects, and other electronics can weaken the wireless signal between the soundbar and subwoofer. If you are pairing in a large room or through a thick wall, move both devices closer together temporarily. Once pairing is complete, you can place the subwoofer anywhere in the room—the connection will hold as long as both devices remain powered on and within normal operating range (typically 30 feet or more, depending on the model).

Use the SmartThings app to pair if the button method does not work

If the pairing button does not work or your model does not have one, you can pair through the SmartThings app on your phone. read the app from the Google Play Store or Apple App Store, then open it and tap the plus icon to add a new device. Select "Subwoofer" from the device list, then follow the on-screen prompts. The app will search for nearby Samsung subwoofers and connect them to your soundbar.

Make sure your phone is connected to the same Wi-Fi network as your soundbar. Some Samsung soundbars require the soundbar to be set up in the SmartThings app first before you can add a subwoofer. If you have not done this yet, add the soundbar to the app using the same process, then add the subwoofer afterward. The app method often works when the physical pairing button is unresponsive or worn out.

Adjust subwoofer volume and settings

After pairing, you can control the subwoofer volume through your soundbar remote or the SmartThings app. On most Samsung remotes, look for a menu button or settings option, then navigate to "Sound" or "Audio Settings." You should see a subwoofer volume slider—adjust it to your preference. If the subwoofer is too loud or too quiet compared to the rest of the soundbar, this is where you fine-tune the balance.

In the SmartThings app, open your soundbar device, tap "Settings," and look for "Subwoofer Volume" or "Bass Level." Some models also let you adjust the subwoofer's crossover frequency, which controls which sounds the subwoofer plays versus the soundbar speakers. The default setting works for most rooms, but if you want deeper bass, you can increase the subwoofer volume or lower the crossover frequency slightly. Test different settings while playing music or movies to find what sounds best in your space.

Troubleshoot if the subwoofer does not connect

If the subwoofer light does not flash when you press the pairing button, check that the subwoofer is actually powered on—some models have a separate power switch on the back. If the light flashes but the soundbar does not recognize it, move the subwoofer closer to the soundbar and try again. Interference from Wi-Fi routers, microwaves, or cordless phones can block the pairing signal, so move both devices away from these sources temporarily.

If pairing still fails after multiple attempts, perform a factory reset on the subwoofer. Most Samsung subwoofers reset by holding the pairing button for 10 to 15 seconds (longer than the normal 5-second pairing press) until the light flashes rapidly or changes color. After the reset, the subwoofer will forget any previous pairings and be ready to connect to your soundbar. Repeat the normal pairing process once the reset is complete. If the subwoofer still will not connect, contact Samsung support with your model numbers—there may be a firmware update available or a hardware issue.

Frequently Asked Questions

Can I use a Samsung subwoofer with a different brand soundbar?

Most Samsung subwoofers are designed to pair only with Samsung soundbars and will not work with other brands. Some newer models may support generic wireless protocols, but this is rare. Check your subwoofer manual or contact Samsung support to confirm compatibility with your specific soundbar model before attempting to pair.

What if my subwoofer pairs but produces no sound?

First, check that the subwoofer volume is not set to zero in the soundbar settings or remote menu. Make sure the soundbar itself is playing audio—test it by playing music or a movie. If the soundbar works but the subwoofer stays silent, try unpairing and repairing the devices. If sound still does not come through, the subwoofer may have a hardware issue and may need service.

Do I need to pair the subwoofer every time I turn on the soundbar?

No. Once paired, the subwoofer will reconnect automatically each time you power on the soundbar. You only need to go through the pairing process once, unless you reset the subwoofer or pair it with a different soundbar.

Can I connect multiple subwoofers to one Samsung soundbar?

Most Samsung soundbars support only one subwoofer at a time. If you try to pair a second subwoofer, it will either replace the first connection or fail to pair. Check your soundbar manual to confirm whether your model supports multiple subwoofers.

Why does my subwoofer keep disconnecting?

Wireless interference, distance, or low battery power (if the subwoofer has a battery backup) can cause disconnections. Move the subwoofer closer to the soundbar, move away from Wi-Fi routers or other wireless devices, and make sure both units are plugged in and powered on. If disconnections continue, try resetting both devices and repairing them.